Wizard Tractor

Torsion spring for lawn tractors and riding mowers. Replaces broken, worn, or missing springs in deck assemblies and mechanical linkages.

Deck won't stay up or is hard to raise? This lift assist spring restores smooth mower deck operation. Quick DIY fix for most lawn tractors.

Extension spring for lawn tractors. Installs on linkage or control mechanisms. Replace if stretched, broken, or missing to restore proper tension.

Extension spring for lawn tractors and riding mowers. Replaces broken, stretched, or missing springs. Essential hardware for proper assembly and operation.

This belt guard is a genuine MTD part, sold individually. This belt guard can be used as a replacement part in a lawn mower or a snowblower. The purpose of the belt guard in a lawn mower or a snowblower is to protect and house the drive belt.The belt guard in a lawn mower or a snowblower might have to be replaced if the drive belt is frequently slipping and catching to the point that the safe and proper rotation of the wheels can no longer be guaranteed. If the belt guard has been damaged to the point of exposing the drive belt to further damage, the belt guard should be removed and replaced by this genuine OEM replacement part as soon as possible.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This belt guard is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Troy-Bilt, Yard Machines, and Montgomery Wards.

This extension spring is a genuine OEM part sourced directly from the manufacturer for use on lawnmowers. The extension spring is part of the idler pulley system that allows the idler pulley bracket to pivot when turning blades on and off. If the spring is broken or warped, the mower deck will not function properly, and the lawn mower will not function at its best. The deck will not move up and down and may be stuck in one position. If this occurs, the extension spring should be replaced.Make sure the lawnmower has not been used recently. Wear safety gloves when working on the mower. Remove the spark plug and key from the lawnmower. Place the lawnmower on a flat surface. Locate the spring under the deck and use the diagram in the manual to remove the spring. Install the new spring and reverse the process to put the mower back together. Reinstall the spark plug. Start the lawnmower and test the deck movement and blade movement to make sure the spring is installed correctly.This extension spring is a silver metal part that is sold individually. It is designed for use in lawnmowers manufactured by Yard Machines, MTD, Troy-Bilt, Husky, Yard-Man, and MTD.

Extension spring for lawn tractors and walk-behind mowers. Replaces broken, stretched, or missing springs in transmission and control linkages.

Square tread tire for lawn tractors and riding mowers. Replaces worn, cracked, or damaged tires. Sold individually for front or rear wheel positions.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Flat washer for lawn mowers, tractors, and outdoor power equipment. Replaces worn, missing, or damaged washers during assembly or repair work.

Small metal washer used with nuts and bolts throughout lawn tractors and tillers. Replace when worn, corroded, or missing to maintain secure fastening.

Replacement flat washer for lawn tractors and outdoor power equipment. Install between fasteners to distribute load. Replace if lost, damaged, or worn.

Replacement grease fitting for lawn tractors and mowers. Installs at lubrication points to allow grease application. Replace if damaged, stripped, or missing.

This is a replacement screw that is a genuine part for select outdoor power equipment units. The shoulder screw is a unique screw that is designed to provide a secure fit while still allowing the unit the joint that it needs to operate properly. Depending on the unit and application, this screw is designed to provide rotation for pulleys, gears, and other moving parts. When they are damaged or wear out, or the threads strip, they will need to be replaced. There are several incidents that could cause damage to a shoulder screw. Regardless, a replacement with this genuine OEM part will be necessary. This OEM shoulder screw is manufactured to exact specifications and can be used with models from Cub Cadet, MTD, and Troy-Bilt. This part will require a socket or nut driver to replace. The shoulder screw is a fairly simple replacement. Allow the unit to cool and wear gloves for hand protection. Since this part has multiple applications, owners should consult their parts diagram for the exact placement of this shoulder screw. The screw is sold individually.

Shoulder screws are a type of fastener used in many types of lawn and garden equipment. Also called stripper bolts or shoulder bolts, they have a head, threads, and an unthreaded shoulder. These screws are used in areas where items need to be held together in a specific location. They can be used with bearings, bushings, and machinery support. Shoulder screws are made of durable metal but can still experience breakage or damage. When this occurs, the screws will need to be replaced. A wrench can be used to remove the damaged shoulder screw. First, visually inspect the shoulder screw to look for damage or corrosion. Sometimes, the screw will be entirely broken. If any of these things are present, a wrench can be used to remove the old shoulder screw. The same tool can be used to insert a new shoulder screw before reassembling the equipment.Designed for lawnmowers, lawn tractors, tillers, leaf blowers, chainsaws, log splitters, chipper shredders, and snowblowers, this part is compatible with items from Yard Machines, MTD, Cub Cadet, Craftsman, Toro, Huskee, Montgomery Wards, Yard-Man, MasterCut, and Troy-Bilt. The locknut is sold separately.