Yard Machines Chipper Shredder Parts

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

Replace your broken or missing engine dipstick. This essential oil level indicator installs in the engine block to monitor oil levels and prevent damage.

Oil dipstick assembly for lawn and garden engines. Installs in the oil fill tube to measure current oil level. Replace if cracked, broken, or missing.

Fuel cap for gas-powered engines and outdoor power equipment. Seals fuel tank to prevent debris, dirt, and air contamination. Replace if cracked or loose.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

Controls gas emissions from small engines on lawn equipment. Replace if cracked, saturated, or engine fails emissions. Confirm fit with your model number.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

Prevents fuel leaks if your equipment tips over. This roll over valve is a critical safety component for small engines. Straightforward installation.

Won't start or pull cord snapped? This recoil starter assembly engages the flywheel to start your mower, tiller, or chipper. Moderate DIY repair.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This seal kit is a genuine MTD part, sold individually. This seal kit provides a variety of replacement seals for use in a log splitter.The seal kit in a log splitter might have to be ordered as a complete replacement part if one or more seals show signs of damage. If the seals in a log splitter allow external materials such as dirt, debris, pebbles, and dust to pass into the appliance or if there are frequent oil leaks stemming from the area of one or more seals, this seal kit should be ordered as a genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This seal kit is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

Replacement bag assembly for chipper shredders. Catches grass clippings, mulch, and debris. Needed when your current bag is torn, unraveling, or worn out.

Weak suction or poor debris collection? This vacuum impeller generates airflow for chippers, shredders, and lawn vacuums. Restores pickup performance.

Rotating impeller assembly for chipper shredders. Processes leaves, yard waste, and limbs. Replace if cracked, damaged, or worn to restore chipping action.

If your snow blower won't self-propel or drive forward, a worn friction wheel assembly is often the cause. This drive system transfers power to the wheels.

This part is a replacement blower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a detached or broken chute in a variety of blower models. The blower chute is what allows snow to be expelled from the snow blower. The chute may become worn, cracked, or damaged over time, as it is subject to significant wear and tear. If this occurs, it should be replaced as soon as possible to ensure the blower functions properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this blower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blower chute is suitable for use on several different models of snow blowers manufactured by MTD, Craftsman, Yard Machines, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.