Yard Machines Edger Parts

This carbon canister filter can be used to replace old filters that are no longer functioning properly. Carbon canister filters need to be replaced regularly in order to ensure outdoor power equipment runs efficiently. Filters are essential for keeping dirt, debris, and harmful materials from ruining an engine. Without carbon canisters, outdoor power equipment can experience decreased fuel efficiency whilst also contaminating the air with more pollutants from the engine. While an engine is running and even after it has been turned off, fuel vapors rise from the fuel tank and pollute the air. Carbon canisters are essential for trapping these vapors and preventing them from being released. Without a clean, well-functioning filter, carbon canisters cannot work efficiently.This carbon canister filter is a genuine replacement part sourced directly from the manufacturer. This replacement carbon canister filter fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

This replacement part is a flywheel. This is a genuine replacement part made by MTD. This part is found inside many different engines and is responsible for rotating to help the engine run smoothly and effectively during use. A new flywheel might be needed if the current one is missing or damaged in any way. This part can become stripped or worn down over time and it is recommended that it be replaced if this is the case. If the wheel has moved off its track, a repair might be possible. Be sure that the engine is completely shut down before replacing this part. Refer to the appropriate user guide for more information on how to begin. This flywheel is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This brake assembly is a genuine MTD part, sold individually. This brake assembly can be used as a replacement part in lawnmowers, string trimmers, and edgers. This assembly contains all of the parts needed to replace the brakes in one of these pieces of equipment.If the brake is slow to respond or does not respond to user input at all, the brake assembly should be ordered as a genuine OEM replacement part. Refer to the manual for proper installation instructions.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This brake assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Craftsman.

This crankcase cover gasket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, and log splitters. It is the component responsible for sealing the crankcase of the engine and protecting it from accumulating dirt and debris from the outside and from leaking oil from the inside.When damaged, crankcase cover gaskets can hamper their ability to seal the crankcase, thereby letting in dirt and debris or letting out engine oil. Look for cracks, tears, punctures, piercings, or erosion of the metal material. If the crankcase cover gasket is compromised, it must be removed and replaced immediately before the appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This crankcase cover gasket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This part is an air filter base gasket. The air filter base gasket helps seal the filter that the air runs through before going to the engine. This helps prevent dirt or other debris from entering the engine, which can cause extensive damage. A new air filter base gasket may be needed if upon visual inspection it is damaged in any way. If the gasket is not forming a seal as it is supposed to, there may be engine problems such as misfiring, stalling, or not starting at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter base gasket is compatible with engines, lawnmowers, log splitters, and trimmers that are manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This is a muffler gasket that is located between the engine exhaust and the exhaust system in various types of lawn and garden equipment. When the muffler gasket is in good shape, it prevents exhaust from leaking out of the tool. It comes with a substantial amount of flexibility so that it can expand in the presence of heat. The main task of the muffler gasket is to prevent leaking. If the gasket is damaged or broken, the exhaust may leak from the joint.A muffler gasket can fail due to many situations. It can dry out, lose its flexibility, or develop cracks or holes. Sometimes the muffler gasket will chafe and lose its resistance to heat so it dries out. Muffler gaskets can also tear due to the intense vibrations from equipment. The gasket will need to be replaced by taking out the engine and switching the muffler gasket for a new one.This is a genuine OEM replacement muffler gasket that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used in lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This genuine replacement part is a muffler assembly for use with a lawn mower. The muffler is an essential part for the safe and reliable operation of a lawn mower. A muffler can help minimize the sound of the lawn mower engine. Additionally, it can help prevent exhaust sparks from exiting the mower and igniting dry grass, leaves, or debris. It can also help improve fuel economy of the mower. The main signs that a muffler may need to be replaced are a change in operating volume, lower fuel economy, or a bad odor during operation. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair. Perform repairs only in a well ventilated area.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt, and more lawn mowers. Please note: original part number 751-14429 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a piston ring set that can be used on many types of lawn and garden equipment. The piston rings are a set of components that ensure the proper level of gas compression is located between the cylinder wall and the piston. The piston rings are responsible for sealing the cylinder so that the gas generated during ignition doesn't leak into the gap between the cylinder and piston. The piston rings also keep the right amount of oil in between the cylinder and piston and improve heat transfer.Before replacing the piston rings, the spark plug wire should be removed from the tool. Make sure the gas has been drained from the fuel tank for safety purposes. Take the equipment and place it on a sturdy surface on its side. After accessing the engine, the new set of rings can be replaced for the old ones so the tool works correctly.This piston ring set is an authentic OEM replacement part kit that is directly sourced from the manufacturer. It is sold as an individual set. The piston ring set is designed to be used with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.

This is a genuine OEM intake valve that serves as a replacement for select lawn mowers from MTD. The intake valve is an engine component that is used to control the flow of air into the engine. When the valve is open, the flow is permitted. The valve closes to stop the flow. The valve can sometimes become stuck, damaged, warped, or get lost and result in the need for a replacement. Without a proper intake valve, the engine will not be able to operate as it should because it cannot regulate the amount of air and fuel coming in. This OEM intake valve is manufactured to exact specifications and designed as an exact fit for compatible machines. It will resolve any issues with engine operation and ensure that the proper amount of air gets into allow the engine to operate properly. This intake valve is sold as an individual replacement part. Be sure to allow the engine to cool completely and disconnect the spark plug before doing any repairs. Wear gloves for hand protection and always use the correct tools when working on the engine.

This replacement part is an exhaust valve. Exhaust valves expel smoke and gases produced while the engine is running. This part makes it easier to ensure that the fumes are being directed away from the user. A new exhaust valve might be needed if the current one has been damaged in any way. This can include being dented, bent, clogged, or cracked, causing exhaust to build up or be directed toward the user. Wear work gloves when completing this repair.This is a genuine OEM replacement part manufactured by MTD. It is sold individually.

This replacement part is a muffler assembly. This part is a genuine replacement part made by MTD. Mufflers are responsible for diminishing sound that often comes out of lawnmowers. These devices can be very loud and a muffler is able to contain most of the noise. A new muffler assembly might be needed if the current one is damaged or missing. If the user notices that the lawnmower is generating much louder noises than during prior uses, it might be due to a faulty muffler. Be sure the engine is turned off before replacing this part. Refer to the proper owner's manual for more information about how to replace this specific muffler. This muffler assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This part is a replacement carburetor kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective or broken carburetor in various models of lawn tractors and other small engine outdoor power equipment. Carburetors are an essential component of any equipment that is powered by an internal combustion engine, as they mix the correct amount of fuel and air. If the carburetor is malfunctioning, the equipment may not be power on or may run inefficiently. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this carburetor assembly, the appropriate owner's manual and equipment diagrams should be referred to. This carburetor assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn tractors and other small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This replacement part is a casing clamp. It is a genuine replacement part made by MTD. This part is typically used to secure the governor control plate to the tank assembly.A new casing clamp might be needed if the current one is damaged or missing. Be sure the machine is stationary and the engine is completely powered down before beginning this repair. This part is made of durable metal so that it works properly with the machine at hand. Refer to the owner's guide for more information on this part. This air cleaner is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.