Yard Machines Lawn Mower Blade

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.

This blade adapter is made to attach a lawn mower cutting blade to the drive shaft of a push mower. Though it is made of sturdy metal and is tightly fastened to the mower's drive, the adapter and blade may wear and loosen over time. This can present a dangerous situation as well as poor cutting performance for the blade. Also, each adapter has a small insert tab that fits into the blade attachment. This tab, called a “key,” is actually a shear pin. Should the blade strike a solid object, the key will sheer off, preventing the blade from coming loose or suffering irreparable damage. The solution to either of these problems is to replace the blade adapter. The blade itself should be closely examined to make sure it fits the new adapter with no wobble or slack. To replace the blade adapter, turn the mower on its side with the air filter on top. Use a ratchet to remove the bolt that attaches the blade and adapter to the drive shaft. Make certain to fit the new adapter key into the keyway on the shaft. Always use a replacement part like this one, that is OEM certified to be identical to the original. This blade adapter is compatible with Ryobi, Yard Machines, Yard Man, Huskee, Cub Cadet, Troy-Bilt, MTD, and Bolens mowers.

The tri-cut blade works to replace edger blades to ensure they are sharp and capable of cutting through the grass and turf properly. The blade is made from metal and can provide users with clean edging around the edges of their lawn and around flower beds. Regularly examine the edger blade regularly to ensure that it is not bent, broken, or otherwise damaged. If your current edger blade is no longer sharp and cannot be sharpened, it is time for a replacement. Without a sharp blade for the edger, it will be impossible to take care of the lawn properly. To replace the blade in your edger, the only tool required is a wrench. Replacing the blade is easy, and it should not take more than 15 minutes. This OEM part is sold individually, and it works with edgers from a range of brands, including Craftsman, Yard Machines, MTD, Troy-Bilt, Bolens, and Yard-Man.

A flail blade is a mechanism most often found in wood chippers and shredders. It is compatible with products by brands such as MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Yard Man.The flail blade part is made out of what is commonly referred to as teeth or knives. The purpose of the flail blade is to serve the machine with the short pieces of metal attached to an axle that turns rapidly. A flail blade is capable of cutting grass and other plants. A flail blade can be mounted on the front, back, or side of outdoor machinery.This flail blade is made out of metal. This flail blade is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This blade adapter has a 25mm inner diameter and fits onto the blade of a variety of lawnmowers. The blade adapter allows the blade to connect to the spindle for proper performance. This blade adapter is made of metal. Regular wear and tear can cause the blade adapter to go bad or even split in half. When this happens, the blade adapter will need to be replaced.Before replacing the blade adapter, the lawnmower should be turned off and the spark plug wire needs to be disconnected. Turn the mower upside down to get access to the component. Use a socket set to remove the old blade adapter and replace it with the new component. Replace any other components, connect the spark plug wire, and test the machine before use. This component is sold on an individual basis. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The blade adapter is made to be used with lawnmowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

This blade adapter kit secures the blade of the lawnmower to the spindle shaft. It's used on walk-behind lawnmowers and is made of durable metal. The kit is sold as an individual item but comes with the blade bolt, the adapter, and the bell blade support. Over time, these parts can wear out or become damaged and will require replacement.The only tool needed for the replacement is a socket set. Remove the spark plug wire and hold the blade while wearing gloves. Take off the blade bolt and support, followed by the blade. Attach the new parts to the lawnmower and reassemble the other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The blade adapter kit is sold as an individual component. It is made for use with lawnmowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolen, Yard-Man, and MasterCut.

This genuine MTD shredder screen determines the size of the shreds that the wood chipper will produce. A shredder screen covers any number of shapes and sizes of screens through which the wood will be chipped.A shredder screen might have to be replaced in the event that it suffers damage over time or in the case that the wood chipper encounters wood that is too hard or too brittle, which can break the shredder screen. The bars of a shredder screen can be welded back into shape by hand, but it is easier and safer to order a replacement shredder screen if it is subject to breaking, piercing, puncturing, or erosion to the metal material. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shredder screen is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Yard-Man, Craftsman, and Troy-Bilt. This part is sold individually.

This chipper blade is an authentic OEM replacement part sourced directly from the manufacturer for use in chipper shredders. The blade is the workhorse of the machine, chopping the limbs and sticks into tiny particles as they pass through the machine. As the machine is used, the blades will become dull and need sharpened. Eventually, the blades may develop cracks or become so worn that they need to be replaced for the chipper to function efficiently. Chipper blades should be periodically inspected.Wear safety gear and remove the chipper's spark plug before working on the blades. Remove the bolts holding the hopper in place and set the bolts and hopper aside. Remove the housing protecting the rotor assembly and chipper blades. Remove the bolts holding the chipper blades in place. Discard the old blades. Install the new blades and reassemble the chipper. Put the spark plug back in and test the blades.This chipper blade is made of heavy-duty metal and is sold as an individual part. It does not include connecting bolts. This blade is designed for use in chippers manufactured by MTD and Troy-Bilt.