Yard Machines Tractor

The exhaust systems on lawn and garden equipment are just as important as those on a vehicle. They need a good seal to prevent a leak between the carburetor and the exhaust tube, which would allow air leakage that could cause performance issues and loud noise. Over time all exhaust gaskets deteriorate and require a full replacement. It is relatively easy to replace an exhaust gasket and requires only the use of screw drivers, a socket set or a wrench set depending on the device being service. Replacement components such as sockets or screws may also be required during this repair. The gasket surfaces should be cleaned and fully dried before being installed between the carburetor and the exhaust tube. This exhaust gasket works with Toro, Simplicity, Murray and Briggs & Stratton lawnmowers, generators, snowblowers, wood chippers, and lawn tractors. It also works with equipment made by Craftsman, Husqvarna, Cub Cadet, Poulan, Wheel Horse, MTD, Ariens, and more.

Fully-threaded hex tap screw for lawn tractors and outdoor power equipment. Fastens machine components together. Replace if damaged, stripped, or missing.

Replacement hex bolt for lawn mowers and outdoor power equipment. Secures components throughout the machine. Replace when stripped, broken, or missing.

The extension spring is compatible with many lawn tractor and riding mower models. The extension spring is often used to allow the idler pulley bracket to pivot when the blade rotation is started or turned off. If there is a problem with the spring, it will affect the functionality and usability of the mower.The spring is made from quality metal, and it is built to stand up to the elements. However, there is still the possibility of problems with the extension spring. In some cases, it might become worn out over time and need to be replaced. It might also corrode. When owners are working on other parts of the machine, the spring could become lost if they remove it.The extension spring will work with select lawn tractors from MTD, Yard Machines, Yard-Man, Troy-Bilt, and Husky. The spring is sold individually. It is an authentic OEM replacement part sourced from the manufacturer.

Plastic deck wheel for lawn mowers and lawn tractors. Attaches to the mower deck to prevent scalping and provide smooth gliding. Replace if cracked or worn.

Bell washer for lawn mowers and tractors. Replaces cracked, worn, or missing washers in drive assemblies. Ensures proper spacing and load distribution.

Belt keeper rod for lawn tractors. Secures drive belts in proper position during operation. Replace if bent, damaged, or belt slips frequently. Confirm fit with your model number.

This part is a lower steering bracket that is used on lawn tractors and riding lawnmowers. The lower steering bracket holds the steering pump in position. This part is essential for the proper operation of the machine. A new lower steering bracket may be needed if the original is cracked, broken, dented, or damaged in any way. If the steering pump is not being held in position, the steering bracket will need to be replaced. This component may wear out after normal use over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This lower steering bracket is a genuine MTD part. It is sold individually. This specific lower steering bracket is compatible with lawn tractors and riding lawn mowers that are manufactured by MTD, Craftsman, Yard Machines, Columbia, Murray, and Troy-Bilt.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Replace a damaged starter front cover if your engine won't start or cranks poorly. Fits directly over the starter assembly for secure protection.

Mulch kit for 42-inch lawn tractor decks. Includes baffles and hardware to convert your mower for mulching. Replace worn or missing components.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This is a replacement left-hand axle for use with many lawn tractor models. The axle is used to connect the left front wheel of the tractor to the pivot bar and the left drag link. If the tractor is not turning properly or if the wheel alignment seems off, this part may be to blame.This axle is made from durable metal, but it can become corroded due to exposure over time. It may also bend or break from impact with a hard object, even when moving at low speeds. If this part is damaged, it is important to replace this part before using the tractor again.This left-hand axle replacement will work for tractor models from MTD, Yard-Man, Troy-Bilt, Cub Cadet, Husky, and Yard Machines. This piece is sold individually and is a genuine OEM sourced part.