Yard-Man Chipper Shredder Parts

Seals the crankcase halves to prevent oil leaks in lawn mowers, tillers, and outdoor power equipment. Replace if oil is leaking or during repairs.

Seals the dipstick oil fill tube on mowers and small engines. Replace if leaking oil or cracked to prevent engine damage. Confirm fit by model.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Connects piston to connecting rod inside the engine cylinder. Replace if pin is stripped, worn, or missing to restore proper piston assembly and movement.

Seals the crankcase halves on lawn mowers and outdoor power equipment. Replace if oil leaks appear or during engine rebuilds. Verify fit by model number.

Oil fill tube assembly for small engines on mowers, tillers, and chippers. Replace if cracked, damaged, or leaking. Installs on engine block.

This is an MTD rocker arm. The rocker arm works in conjunction with the engine and head. The job of the rocker arm is to push the intake valve open, allowing fuel and air to enter the cylinder. Since the rocker arm is a part of the head gasket system, any damage can cause the engine to run extremely weak. There could also be a noticeable clicking or ticking noise originating from the engine area of the mower. A visual inspection of the rocker arm will confirm any damage. Begin the repair by removing the muffler guard. After removal, move to the valve cover and remove that guard as well. Disconnect the fuel and air lines running to the head. Remove the spark plugs in the valve section. Finally, the rocker arm can be removed using a socket wrench. Repeat these steps in reverse to install the new rocker arm.This product is sourced directly from the manufacturer as a genuine OEM part. The component is available individually, separate from the original machine. This part is compatible with MTD and Cub Cadet brand equipment.

Seals the intake valve to prevent oil leaks and maintain proper compression in small engines. Replace if you notice oil consumption or performance loss.

Replaces a worn, damaged, or missing valve spring retainer in your outdoor power equipment engine. Essential small fastener component for valve assembly.

Exhaust valve spring installs in small engines to control valve operation. Replace if spring is broken, weakened, or missing to restore proper valve function.

This replacement part is a piston, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This piston is commonly found in lawn mowers and is an important part in the user process. Pistons help transfer the combustion power of the engine to other working parts of the machine. A new piston might be needed if the overall performance of the engine is lacking compared to previous uses. If the lawn mower is not able to build enough power to accelerate, the piston might be faulty. It is also common for the engine to use an excessive amount of oil or put out white or gray exhaust smoke. All of these indicators might mean that the piston should be replaced. This part is a genuine OEM replacement part. This piston is sold individually and can be used in lawn mowers manufactured by MTD.

This carburetor repair kit is a genuine OEM replacement part for a wide variety of tiller and chipper engines. The carburetor is one of the most essential parts of an engine. It is responsible for mixing a balance of oxygen and fuel for combustion. If the carburetor is damaged, the engine will not produce the right about of combustion and may not start. This kit is for service the carburetor if it becomes damaged. This kit contains a valve needle, jet nozzles, a float and float pin, o-rings and gaskets, and fuel drain plug—everything needed to fix a carburetor. To make repairs to the carburetor, you will need a set of screwdrivers and socket wrenches. The repair will depend largely on what appliance you are fixing, so be sure to follow the instructions in the user's manual. Before making any repair, be sure to allow the engine to cool completely and drain it of excess fuel. This part is designed for tiller and chipper engines made by Cub Cadet, MTD, Troy-Bilt, and Yard Machines. This part is sourced direct from its original manufacturer and ships individually.

This replacement part is an oil seal. This part is small but important in various types of machines that rely on oil to run. The oil seal is found near the fuel tank and ensures that there are no leaks. If the machine is leaking oil, it can be due to a damaged oil seal. Seals like this one can wear out over time or be knocked out of place by impact.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

Replacement fuel tank assembly for lawn mowers and outdoor power equipment. Installs on the engine to hold fuel. Needed when original is cracked or leaking.

This choke control lever automatically regulates the combined amount of air and fuel that come together in a small gasoline powered engine's carburetor to give a cold engine a fuel-rich mixture when the motor is first started. The control lever has several positions that allow it to adjust the fuel/air mixture in lawn equipment such as lawn mowers, snow blowers, tillers, chippers, log splitters, and other small gas engines. Over time with regular use, the control lever may become worn and must be replaced. There are several signs that indicate a choke control lever may be failing. If the gas tank is full of fresh gasoline but the engine refuses to start, if the engine starts and quickly floods, or if the engine runs at top speed but does not idle, the choke control level may be need to be replaced. Should the choke control lever need to be replaced, it is essential to use an OEM genuine manufactured replacement part such as this one. OEM parts are built to the exact specifications of the equipment's original parts. This part is compatible with Huskee, Cub Cadet, Yard Man, MTD, Yard Machines, and Troy-Bilt brand equipment.