Yard-Man Control Cable

This OEM quality control cable is designed to be used with walk-behind lawnmowers to stop the blade if the control handle is released. If the cable is damaged or broken, it will not release the brake when the lever is pressed. This is a safety feature to ensure the user can easily stop the mower by releasing the lever. The control cable has delicate end connections that can wear out through normal use. If this happens, the lawnmower may malfunction, and the component should be replaced.If a visual inspection of the control cable shows wear or a break, it will need to be replaced. There are no tools required for the process. A set of work gloves can be useful. Take the original control cable and untwist it so it can be removed from the lawnmower. The new control cable can be pushed into place.This control cable is an authentic replacement part directly sourced from the manufacturer and sold as an individual unit. The cable is made for use with lawnmowers manufactured by Ryobi, Yard Machines, MTD, Yard-Man, and Bolens.

This part is a replacement drive cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It can be used to replace a broken or malfunctioning drive cable in a variety of different lawnmower models.The drive cable is important for proper equipment control, as it stops the engine when the operator presence handle is released. Over time, drive cables can become stretched, worn, broken, or detached, which can be dangerous and thus they should be immediately replaced. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive cable, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this drive cable is suitable for use on several different models of lawnmowers manufactured by MTD, Yard Man, Yard Machines, Troy-Bilt, and Husky. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

The snowblower auger cable initiates operation of the snowblower’s auger similar to the cable on the handle of a push mower. To start the snowblower, the control handle must be squeezed. This engages the snowblower auger cable to allow the auger to begin turning. When the snowblower auger cable is broken, the snowblower cannot work because the auger will not turn. The length of this snowblower auger cable is 47.48 inches. It is made from high-quality rubber insulation of a metal wire. A pair of pliers and a wrench are needed to complete the repair. If the snowblower still does not work after replacing the snowblower auger cable, check the shear pin as these are prone to breaking and will also prevent the auger from turning. This genuine OEM snowblower auger cable is compatible with snowblowers manufactured by Craftsman, Cub Cadet, Husky, MTD, Troy-Bilt, Yard Machines, and Yard-Man. This part is sold individually. You will need to order any hardware, housing, and the trigger separately if these items also need repair or replacement.

This part is a speed select cable. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or detached speed select cable on certain snowblower models. The speed select cable works by fastening the ground drive system to the speed control level. This enables the equipment operator to properly control speed and traction while using a snowblower. Over time, speed select cables can experience wear and tear which can cause them to break or become detached, requiring replacement. Without a functioning speed select cable, the snow blower will not be able to be properly controlled. For accurate information on how and where to install this replacement speed select cable, specific manufacturer diagrams should be referenced. Proper safety measures should always be followed when working on any type of equipment.As an authentic replacement part, this speed select cable can be used on multiple different models of Craftsman, MTD, Yard-Man, and Huskee snow blowers. Please note that this speed select cable is a genuine part made of high-quality materials and is sold individually.

This genuine MTD speed selector cable attaches the speed control lever to the snowblower's ground drive system to regulate and maintain the speed of the snowblower.Though speed selector cables are highly durable, they can be subject to damage as a result of exposure to inclement weather, impact upon collision, and general decline. Signs of a damaged speed selector cable can include malfunctioning regulation of speed, an overheating engine, or black smoke rising from the engine. If any of these symptoms occur, the speed selector cable should be checked and replaced immediately, as the snowblower cannot function properly without it. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This speed selector cable is compatible with the following brands: MTD, Troy-Bilt, Cub Cadet, Yard Machines, and Craftsman. Part sold individually.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a lawn mower. This part allows the user to control the mower.The control cable in a lawn mower might have to be replaced if the cable is frayed, punctured, ripped, torn, or otherwise damaged. This damage could be the result of long term wear and tear or an accident. If this occurs, the control cable should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This control cable is compatible with the following outdoor appliance brands: MTD and Yard Man.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This is a drive cable that is used in many models of snowblowers from top manufacturers. It is composed of a metal cable that is inserted into a flexible plastic housing. The purpose of the drive cable is to connect the drive control located in the snowblower engine handle. It makes sure that the snowblower starts and stops when the controls are used. If the drive cable is broken or becomes damaged, the snowblower will not work correctly even if the control handle is released.If a snowblower isn't starting or stopping when expected, the drive cable is likely the source of the problem. The part needs to be replaced before the snowblower can be used again. Disconnect the spark plug wire before releasing the handle cables and removing the drive cover. Replace the drive cable and reassemble the other parts.This is an authentic OEM replacement drive cable that is sourced directly from the manufacturer. It is sold as an individual component. The drive cable is designed to be compatible with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

The clutch cable is a vital part of the snowblower, as it connects the control lever to the clutch in the machine's drive system. The cable is what allows the user to control the clutch. If the clutch cable is bad, it means the user will not have control over the clutch. The snowblower clutch cable could become corroded, or part of it could break in some cases. Regardless of what causes problems in the cable, it will need to be replaced before the snowblower will work properly. The authentic OEM replacement clutch cable is sold individually. This cable is only for use with snowblowers. Brands compatible with the cable include Cub Cadet, Craftsman, Huskee, Montgomery Wards, Bolens, Yard-Man, Yard Machines, Troy-Bilt, Ryobi, and MTD. When choosing a replacement cable, the owner must be sure that their choice will work with their make and model of snowblower.