Yard-Man Edger Parts

Shoulder screw for lawn mowers, tillers, and edgers. Secures components together. Replace if worn, stripped, or missing for proper assembly.

Flywheel assembly for tillers and outdoor power equipment. Replaces cracked, damaged, or worn flywheels that affect engine timing and cooling fan operation.

This is an ignition coil/module assembly for a string trimmer. Ignition coils are generally found on yard equipment that uses a motor, like lawnmowers and trimmers. It sends electric pulses to the spark plug so that the equipment can start.A faulty ignition coil can cause an array of problems. If the machine isn't starting it may need to be replaced. Sometimes, engine problems may be caused by other parts, so be sure to confirm that it is the ignition coil causing the trouble. An ignition tester can be used to tell if it needs to be replaced. The clutch and the engine will have to be removed to access the old ignition coil, once it has been accessed it can be aligned on the magnets of the engine and put back together for the machine to work again.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: Yard-Man, MTD, Cub Cadet, and Troy-Bilt.

Replacement idler pulley for outdoor power equipment. Installs on the deck assembly to guide belts. Replace if cracked, worn, or spinning rough.

The roller cable guide is designed for use with lawnmowers. It supports and guides cables to the lasher in the mower.This roller cable guide is a genuine OEM part sourced directly from the manufacturer and is sold individually. This roller cable guide is compatible with the following brands: Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, and Yard-Man.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

Rope won't retract after pulling? This recoil starter spring restores proper rope tension in lawn equipment engines. Essential starter assembly component.

Hex lock nut secures bolted joints on outdoor lawn equipment. Replace if threads are stripped, nut is missing, or won't hold proper tension.

The lock nut is a piece of standard hardware that may have a variety of applications on lawn and garden equipment, including on engines, housings, and other components. The lock nut offers a secure fit by tightening into a flange that prevents the nut from loosening like a regular nut might. Over time, the flange or the nut can become worn or damaged. In some cases, lock nuts may be lost during the process of other repairs or maintenance. Replacing them with genuine OEM parts like this lock nut is the best solution. This lock nut is compatible with hundreds of machines, including mowers, snowblowers, and chippers from MTD, Troy-Bilt, Cub Cadet, RYOBI, Yard-Man, Yard Machines, Bolens, and Husky. The ¼-inch lock nut has multiple locations and applications, so owners should consult their parts diagram for exact placement and part number identification. This lock nut is made of durable metal and sold as a single unit. Those who need additional pieces will have to order multiple quantities. This part will require a wrench or a socket to replace, as well as pliers and/or a screwdriver to hold the bolt or screw in place.

If your mower won't start or turns over but won't crank, the ignition switch may be faulty. This key-operated switch controls electrical power.

This fuel tank is a genuine OEM part sourced from the manufacturer. It is commonly used on chippers, lawnmowers, lawn tractors, and other lawn and garden equipment that is powered by gasoline. The fuel tank is attached to the carburetor with a hose and clamp. The fuel tank has a vented fuel cap to help keep a vacuum from developing in the fuel line. If a vacuum develops, the fuel will not flow from the fuel tank to the carburetor. The fuel tank is made of non-corrosive plastic to prevent deterioration from the fuel.Inspect the fuel tank periodically for signs of deterioration. If there are any cracks or flaws that could become cracks, replace the fuel tank. Leaking fuel not only reduces the performance of the engine but can also be a safety hazard. Before replacing the tank, the fuel should be run dry or pumped out. Remove the spark plug to prevent accidental engine ignition while the fuel tank is replaced. This fuel tank is sold as an individual unit. It is designed for use with lawnmowers, lawn tractors, and many other small engines that are powered by fuel. This fuel tank is compatible with equipment made by MTD, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, and Husky.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

Here is a replacement shoulder screw that is commonly used for various types of outdoor power equipment. Another name for the shoulder screw is a shoulder pin. The screw is often used to help secure the plastic wheels to the deck of a machine. However, different machines may have different uses for shoulder screws and other types of hardware. The shoulder screw is made from metal and is durable. However, the pin may still need to be replaced at some point. Whether it is because of corrosion or being bent, it is important to replace a failed screw with a new one. When performing maintenance on the machine, it is also possible that the screw could become lost, which would require a replacement. This is a genuine OEM replacement shoulder screw. It is sold individually and works with many types of makes and models. The screw is often used for edgers, snowblowers, lawn mowers, and chainsaws. Brands that have models that will be compatible with the shoulder screw include Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.