Yard-Man Leaf Blower Parts

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

This part is a bag assembly that is part of lawnmowers, wood chippers, and shredders. The bag assembly contains the lawn and garden debris. This bag assembly is black in color.A new bag assembly may be needed if the bag is ripped, torn, or if there are holes in it. The bag assembly may become worn due to normal wear and tear over a period of time. If this is the case, it will need to be replaced so that it can properly contain the lawn and garden debris disposed of by the outdoor power equipment that it is attached to.This bag assembly is a genuine MTD part. It is sold individually. This specific bag assembly is compatible with lawnmowers, wood chippers, and shredders that are manufactured by the Troy-Bilt, MTD, Yard Machines, Cub Cadet, and Yard-Man brands.

This impeller can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of an impeller, which operates by rotation, is to take in the leaves and eject them out of the chute.An impeller might have to be replaced if it suffers damage that impedes it from properly ejecting the leaves from the chute. A common symptom of an impeller that needs to be replaced is that the leaves are not ejected with enough force from the chute or that the ejection process stalls or does not occur at all. If this is the case, the impeller should be removed and replaced with this genuine OEM replacement part immediately before using the leaf blower or leaf vacuum again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD, and it is sold individually. This impeller is compatible with the following brands: MTD, Troy-Bilt, and Yard Man.

The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.

This replacement part is a screw. This is a genuine replacement part made by MTD. This part is small but very important in many types of machinery. A screw typically works with other small parts like washers or nuts to keep other parts secure and in place. A new screw might be needed if the current one has been stripped or lodged in place. This part can become damaged due to normal wear and tear over time. If this is the case, it is best to replace it as soon as possible. This should be a simple repair and require common household tools like a screwdriver. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This genuine OEM replacement part is a push cap designed for snowblower, tiller, and edger wheel assemblies. A push cap is a special type of nut, or fastener, that helps to hold unthreaded shafts in place. Although small, this push cap helps to secure the wheel to the axle. Push caps are most commonly damaged if the operator uses their appliance in rough terrain. If damaged, it can fall off, causing the wheel to also fall off. Replacing push caps is an easy repair as they attach to the outside of the wheel assembly. The only hardware required to make this repair is a nut driver. If you do not have a nut driver, a pair of pliers can also be used to attach the new push cap. This part is a high-quality replacement part meant for Yard Man, Husky, Ryobi, Yard Machines, Troy-Bilt, MTD, Bolens, and Cub Cadet appliances. It is sourced direct from its original manufacturer and ships individually.

This wheel assembly is an authentic OEM replacement part sourced directly from the manufacturer for use on lawnmowers. This is a complete wheel assembly. The rim and wheel are one complete unit. If the lawnmower wheel is damaged and needs to be replaced, the entire piece can be taken off the mower and this assembly installed. Wheels can be damaged due to stationary objects that the mower runs over during operation or simply due to normal wear and tear. If the lawnmower is shaky or unstable during operation, the wheels should be inspected to determine which wheel needs replaced. It is a good idea to have an extra wheel assembly on hand so that the lawnmower can be repaired quickly if a wheel is damaged during use. Make sure the lawnmower is parked on a flat surface and that the spark plug is removed before repairing the wheel. Remove the nut holding the wheel on the shaft and set the nut aside. Place the new wheel on the shaft and use the nut to secure it. This wheel assembly is sold as an individual unit. It is designed for use on lawnmowers manufactured by Craftsman and MTD.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

This replacement part is a carburetor insulator. This is a genuine replacement part made by MTD. This part is found in many types of machinery and is responsible for regulating the temperature within the machine to ensure that it runs smoothly and effectively.A new carburetor insulator might be needed if the appliance or machine is frequently changing temperatures and there is no regulation inside the engine. This can be due to a faulty carburetor and should be replaced immediately if this is the case. Refer to the proper user manual for more information on how to repair or replace this part. Work gloves are also recommended when replacing this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.