Yard-Man Leaf Blower Parts

Engine won't start or pull cord slips? This starter cup connects the recoil mechanism to start your engine. Simple bolt-on replacement part.

Engine runs too fast or won't maintain steady speed? This governor bracket controls engine RPM. Common repair for speed control issues on small engines.

Oil fill plug assembly for small engines. Seals the oil fill opening to prevent leaks. Replace if cracked, stripped, or missing to maintain proper seal.

Creates a leak-proof seal between the fuel drain plug and tank. Replace if you notice fuel leaking from the drain area. Verify fit with your model number.

Fix oil leaks around your valve cover with this engine gasket. Creates a tight seal between cylinder head and cover. Simple DIY repair for small engines.

Fix rough idling and poor fuel mixture with a new carburetor insulator gasket. Prevents air leaks that affect engine performance. Simple DIY repair.

This carburetor insulator is a genuine MTD replacement part for appliances with small engines, such as lawn mowers, lawn tractors, lawn trimmers, snowblowers, chipper shredders, tillers, and leaf blowers. The function of a carburetor insulator in a small engine appliance is to maintain a lower temperature for a running engine and to keep that heat away from the carburetor, the purpose of which is to mix the air and fuel in order to start the engine. A functioning carburetor insulator will prevent the engine from overheating.A broken or non-functioning carburetor insulator will likely not prevent the engine from operating, but it might slow down its power or reduce its fuel economy due to compensation from overheating. An engine with a damaged carburetor insulator might take in more fuel than usual or allow in unmetered air. An unmetered air leak can cause damage to the engine in the short-term so if there appears to be visible damage to the carburetor insulator, it should be replaced as soon as possible.This carburetor insulator is compatible with the following brands: MTD, Cub Cadet, Yard Machines, and Craftsman.

Seals the cylinder head to the engine block, preventing compression and oil leaks. Replace if you notice oil seepage, overheating, or loss of power.

Metal connecting rod assembly that links the crankshaft to the piston in small engines. Replace if rod is bent, cracked, or damaged from wear or impact.

Governor spring for small engines on lawn mowers, tillers, blowers, log splitters, and chippers. Replace if stretched, broken, or missing for proper throttle control.

It's best to have spare O-ring gaskets on hand to rebuild a carburetor when the need arises. Use this manufacturer-approved replacement part to complete the process. When outdoor power equipment shuts off just after starting or won't start altogether, there may be a problem with the carburetor. It could be a leak that causes compression problems keeping the machine's engine from starting. Gasoline may drip from the float bowl because of an O-ring that won't seal or seat evenly all around, or one that has become brittle over time. This is a genuine OEM part compatible with specific lawnmowers, snowblowers, wood chippers, log splitters, tillers, and other garden maintenance machines from Craftsman, MTD, Cub Cadet, MasterCut, Troy-Bilt, and Yard Machines. It is sold individually.

Starter rope won't retract after pulling? This recoil pulley and spring assembly fixes rope retraction issues on mowers and small engines. Direct fit.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

Oil dipstick assembly for lawn and garden engines. Installs in the oil fill tube to measure current oil level. Replace if cracked, broken, or missing.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

This part is a replacement blower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a detached or broken chute in a variety of blower models. The blower chute is what allows snow to be expelled from the snow blower. The chute may become worn, cracked, or damaged over time, as it is subject to significant wear and tear. If this occurs, it should be replaced as soon as possible to ensure the blower functions properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this blower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blower chute is suitable for use on several different models of snow blowers manufactured by MTD, Craftsman, Yard Machines, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.