Yard-Man Snow Removal Equipment Parts

Replacement shear pin for snow thrower auger assembly. Installs between auger and drive shaft to protect transmission. Replace if broken or missing.

Snowblower won't move forward or backward? The friction wheel assembly works with the friction disc to turn the drive axle and restore self-propulsion.

Complete fuel tank assembly for snow throwers and tillers. Includes tank and mounting hardware. Replace if cracked, leaking, or damaged during storage.

Starter rope won't retract or engine won't crank? This recoil starter assembly includes housing, spring, pulley, rope and grip. Moderate DIY repair.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

5-inch chute adapter for gas snowblowers. Connects the discharge chute assembly to direct snow flow. Replace if cracked, broken, or missing for secure fit.

Auger engagement handle for snow throwers. Installs on handlebar assembly to control auger operation. Replace if cracked, bent, or broken for safe use.

Fastening screw for snowblower component assembly. Replaces lost, stripped, or damaged screws that secure panels, covers, or internal parts.

Replacement mounting screw for gas snowblowers. Secures components and panels together. Order if your original screw is lost, stripped, or missing.

This is a threaded mounting stud used to secure the carburetor to the engine on outdoor power equipment. It provides a solid attachment point so the carburetor stays properly aligned and sealed against the engine intake. Replace this stud if it is stripped, bent, broken, or if the carburetor is loose and causing air leaks or poor engine performance.

Hex screw for snowblowers and lawn mowers. Secures components throughout the machine. Replace if stripped, missing, or rusted for proper assembly.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

Replacement hex bolt for lawn tractors and riding mowers. Secures components and housing parts. Order when original bolt is lost, stripped, or damaged.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.