Yard-Man String Trimmer Parts

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

This genuine replacement part is a muffler assembly for use with a lawn mower. The muffler is an essential part for the safe and reliable operation of a lawn mower. A muffler can help minimize the sound of the lawn mower engine. Additionally, it can help prevent exhaust sparks from exiting the mower and igniting dry grass, leaves, or debris. It can also help improve fuel economy of the mower. The main signs that a muffler may need to be replaced are a change in operating volume, lower fuel economy, or a bad odor during operation. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair. Perform repairs only in a well ventilated area.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt, and more lawn mowers. Please note: original part number 751-14429 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.