Yard-Man Tractor

This is a carburetor mounting stud for use with various lawn tractors. The carburetor plays a vital role in the performance of an engine, and it needs to be affixed securely to the correct location. The carburetor mounting stud fits onto the engine block and attaches the carburetor to the engine securely. If there is a problem with the mounting stud, it could cause problems with the carburetor.Although this is a simple piece and made from quality metal, there is still a chance that it might need to be replaced at some point. Corrosion or other damage could cause problems with the piece. When owners install the new stud, they should do so in a well-ventilated area. They should also drain the fuel tank and disconnect the spark plug wire before they start the repair.The carburetor mounting stud works on certain models of lawn tractors from Troy-Bilt, MTD, Cub Cadet, Yard-Man, Yard Machines, and Husky. This piece is sold individually, and it is a genuine OEM replacement part that has been sourced from the manufacturer.

Seals the exhaust pipe connection on lawn tractor and walk-behind mower engines. Replace when exhaust leaks occur or during engine maintenance. Verify fit with your engine model number before ordering.

Seals the cylinder head to prevent oil and compression leaks in lawn mower engines. Replace if you notice oil seepage or loss of power. Verify fit with your model number.

Engine making loud knocking noises or losing oil pressure? The connecting rod assembly links the piston to crankshaft. Requires engine disassembly.

Fix excessive oil leaks or smoking engine with this breather valve. Regulates crankcase pressure in lawn mower and tiller engines. Easy DIY fix.

Lawn mower won't stay running or struggles to start? This carburetor assembly regulates air and fuel mixture to your engine for reliable performance.

Engine won't shut off or runs after ignition is turned off? This fuel shut off solenoid valve kit controls fuel flow. Includes gaskets for install.

This is a genuine OEM carburetor rebuild kit sourced directly from the manufacturer and is intended for use with lawn tractors. This rebuild kit saves money when the carburetor is not working up to its full potential. If the carburetor is clogged, it won't get enough fuel and the engine won't run efficiently. The carburetor creates the air and fuel mixture that causes the cylinders to ignite and run the engine. If any of the seals or gaskets are worn and fuel leaks from the carburetor or air gets inside, the ratio of fuel to air will be off and the engine may sputter or not run at all. Before rebuilding the carburetor, you can test it to determine if it needs to be repaired or if there are other potential issues. First, remove the air filter from the lawn tractor and pour a little gas directly into the carburetor. Start the engine. If the engine dies quickly after starting, the carburetor should be rebuilt. This kit contains all the gaskets and o-rings needed to rebuild the carburetor. Make sure there is no fuel in the engine when you work on the carburetor.This kit is made to be compatible with lawn tractor engines manufactured by Yard Machines, MTD, Cub Cadet, Husky, Yard-Man, and Troy Bilt. It is sold as an individual unit.

If your lawn tractor won't change speeds or struggles with uneven power delivery, this variable speed pulley assembly controls shaft rotation speed changes.

Replace your cracked or damaged lawn tractor deck housing assembly. This structural component forms the main body of the mower deck where blades mount.

This axle oil seal is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn tractors. The oil axle seal keeps transmission fluid from leaking and causing damage to the engine. If there are puddles of oil beneath the lawn tractor, the axle's oil seal should be inspected and replaced if necessary. During routine maintenance, the oil seal should be visually inspected, and it should be removed and replaced when there are signs of wear and tear. To replace the axle oil seal, first, remove the spark plug from the machine for safety. Park the lawn tractor on a flat surface to prevent accidental rolling. Wear work gloves and safety goggles. Remove the half shaft from the tractor and pry the old axle oil seal off the machine. Insert a new oil seal. Check the fluids in the lawn tractor and fill as needed, then reassemble the tractor. After putting the spark plug back in, run the engine and look for leaks. This axle oil seal is a black rubber part that is sold individually. It is designed for use on lawn tractors manufactured by Cub Cadet, Yard-Man, MTD, and Troy-Bilt.

Pan head screw for lawn tractors and walk-behind mowers. Secures covers, guards, and panels. Replace when stripped, rusted, or missing hardware.

Hex jam nut secures components on lawn mowers and tractors. Replace if stripped, rusted, or missing to ensure proper fastening and equipment safety.

Deck lift link for riding mowers and lawn tractors. Connects the deck height adjustment lever to the mower deck. Replace if bent, broken, or worn.