Microwave Handle

The Microwave Door Handle is an OEM part for GE microwaves. It provides a grip for opening and closing the microwave door, ensuring convenient access to the appliance.The handle measures 11" in overall length, with an 8.75" screw mount. The holes measure 9-7/8" from center to center. 

Common causes of a bad door handle include repeated use over time, accidental impacts that cause cracks or breaks, and stress from frequently pulling the door open. A compromised handle can affect the ease of using the microwave and potentially lead to further damage to the door.

Symptoms of a bad door handle include:

• Cracks or breaks in the handle
• The handle feeling loose or wobbly
• Difficulty in opening or closing the microwave door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: White. For black order WB15X10022. For bisque order WB15X10045.

The Door Handle is an OEM replacement part for Whirlpool built-in microwaves. For black order 4393782.

Causes of failure include cracking or loosening of plastic mounting brackets over years of use. Handles also face heat exposure during each use cycle that can stress materials sooner.

Symptoms of a problematic handle are:

• Looseness preventing door latching
• Difficulty opening the microwave without two hands
• Discoloration, cracking or breakage at stress points

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some KitchenAid models.

The Microwave Door Handle (BLK) is an OEM part for Whirlpool microwaves. It provides a sturdy grip for opening and closing the microwave door. The handles measure approximately 10.45 inches long by 1 inch wide. This part has two mounting holes spaced 6.75 inches apart to fit existing screw holes on the microwave door.

Causes of a bad door handle can include general wear and tear from frequent use, accidental impact that leads to cracks or breaks, or exposure to high temperatures that may cause the material to degrade over time.

Symptoms of a bad door handle include:

• Difficulty opening or closing the microwave door
• A loose or wobbly handle
• Visible cracks or breaks in the handle
• The handle detaching from the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For white order 4393777.

This is the handle if the mounting holes are 6.75" The handle to use if the mounting holes are 8.5" is 8169738.

The Microwave Door Handle is an OEM part for Frigidaire microwaves. It provides a secure and convenient grip for opening and closing the microwave door. This handle is designed to fit seamlessly with the door’s structure, ensuring proper operation while maintaining the appliance's overall aesthetic.

Over time, microwave door handles can become damaged due to frequent use, accidental impact, or exposure to heat and moisture. Cracks, chips, or loosening of the handle can compromise its function and appearance, making it difficult to open or close the microwave door properly.

Symptoms of a bad Microwave Door Handle include:  

• A loose or wobbly handle  
• Cracks or visible damage to the handle  
• Difficulty in opening or closing the microwave door  
• The handle detaching completely  

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement door handle restores a secure, comfortable grip so the door opens and closes smoothly again. It's designed to replace a cracked, loose, or missing handle and refresh the look and function of your appliance's door.

• Provides the handhold needed to open and close the door
• Replaces cracked, broken, or missing handles
• Helps correct a loose or wobbly handle
• Can improve difficulty opening or closing caused by a damaged handle

• Disconnect power to the appliance before servicing
• Access screws from the inner side of the door; carefully remove inner trim to reach fasteners
• Support the door while working to avoid stressing hinges
• Reuse original hardware and verify proper door alignment and latching after reassembly

Color: Black

The Door Handle (BLK) is an OEM part for Whirlpool microwaves. This black handle provides a secure and comfortable grip for opening and closing the microwave door, ensuring easy access to the interior.  

Causes of a bad door handle can include regular wear and tear, physical damage from impacts, or exposure to high temperatures. 

Symptoms of a bad door handle include:

• The handle becoming loose or wobbly
• Visible cracks or breaks in the handle material
• Difficulty in gripping the handle securely
• The handle detaching from the microwave door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Door Handle replaces a cracked, loose, or worn handle on your microwave, restoring a secure grip and clean look. Swap it to bring back smooth, safe door operation and the original appearance of your appliance.

• Provides a solid handhold to open and close the door
• Helps keep daily door operation safe and convenient
• Typical failure signs: cracked/broken handle, loose or wobbly mounting, scuffed or peeling finish
• Restores proper feel when opening the door

• Disconnect power at the breaker or unplug the appliance before servicing
• Support the door and keep track of screw locations during removal
• Reuse original mounting hardware and spacers; do not overtighten screws
• After installation, verify the door opens and closes smoothly

The Handle is an OEM part for GE microwaves. This handle provides a secure and convenient grip for opening and closing the microwave door, ensuring easy access to the interior.  

Causes of a bad handle can include regular wear and tear, physical damage from impacts, or exposure to high temperatures.  

Symptoms of a bad handle include:

• The handle becoming loose or wobbly
• Visible cracks or breaks in the handle material
• Difficulty in gripping the handle securely
• The handle detaching from the microwave door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: Black. For white order W10295692. For stainless order W10272107.

A white replacement handle assembly that restores a clean, functional door grip and appearance. Installs in place of a cracked, broken, loose or worn handle to make opening and closing smooth and secure. What it does:

• Replaces damaged or worn door handle for reliable grip and operation
• Restores original appearance on white finishes
• Stops cracking, splitting or loose-handle symptoms that affect use
• Matches OEM mounting points for a secure fit when installed correctly

• Disconnect power or unplug the appliance before servicing if your repair requires access near electrical components
• Use basic hand tools; follow OEM diagram for fastener locations and alignment
• Tighten fasteners securely but avoid overtightening to prevent cracking

This end cap finishes and secures the exposed end of a handle, rail, or trim piece on your appliance. It restores a clean look and helps keep the attached component stable during everyday use.

• Covers the open end of a handle/rail and conceals fasteners for a finished appearance
• Helps hold the mating piece in place to reduce looseness, rattling, or wobble
• Replace if the existing cap is cracked, missing, warped, or will not stay attached
• Can help address issues like a loose handle/rail, exposed screws, or sharp/unfinished edges

• Disconnect power to the appliance before servicing; shut off gas/water if applicable
• Note the cap's orientation and any side-specific features before removal
• Release retaining tabs or remove the set screw (as applicable), then align and press/fasten the new cap into place
• Do not overtighten fasteners; verify secure fit and smooth operation after installation

This replacement door handle restores a secure, comfortable grip for opening and closing your microwave door. Replace a cracked, loose, or missing handle to keep everyday use safe and your appliance looking clean and complete. What it does:

• Provides the primary grip point to open and close the microwave door
• Restores proper leverage and feel when the original handle is damaged
• Helps resolve issues like a loose, wobbly, or broken handle
• Improves appearance when the original handle is scuffed or cracked

• 1 door handle

• Disconnect power to the microwave before servicing.
• Protect the door/front panel from scratches; support it while working.
• Access and remove the handle's mounting screws/fasteners from the inner side of the door; transfer any spacers as needed.
• Hand-tighten mounting screws and ensure door opens/closes smoothly without binding.

Color: Black

The Microwave Door Handle Assembly is designed to replace your existing handle, ensuring your Samsung microwave remains secure and easy to use. This genuine OEM part guarantees a perfect fit and reliable performance for your appliance. Crafted with high-quality materials, the handle assembly offers durability and a comfortable grip, enhancing your overall microwave experience. Installation is straightforward, allowing you to quickly restore your microwave's functionality without any hassle. Whether your original handle is broken, worn out, or missing, the Microwave Door Handle Assembly provides a seamless solution to maintain the aesthetic and operational integrity of your Samsung microwave. Compatible with various Samsung microwave models, this essential part helps keep your kitchen appliances running smoothly and efficiently.

Color: White

This replacement end cap finishes and secures the open end of a compatible handle, rail, or trim piece on your appliance. Replacing a cracked or missing cap restores a clean look and helps keep the attached part properly aligned. What it does:

• Covers and protects the exposed end of the mating bar/handle/trim
• Helps keep the connected component seated and prevents shifting
• Replaces broken or missing caps that won't stay attached
• Common signs: loose or wobbly trim/rail, rattling, visible broken tabs, or an uncovered edge

• 1 end cap

• Disconnect power to the appliance before servicing
• Compare the new cap to the original to match orientation
• Transfer and reuse any original screws or clips if your model uses them
• Align tabs and press or slide the cap into place without forcing; verify a secure fit