Parts for Bosch HBN446 AUC: 01 - Complete Parts

Mounting bracket for wall oven hi-limit thermostat. Secures thermostat in proper position. Replace if bent, broken, or missing to ensure safe installation.

A replacement mounting bracket that secures internal components or panels so parts stay aligned and stable during normal use. Restores proper fit and reduces movement that can cause rubbing or noise. What it does:

• Supports and holds a panel, assembly, or component in the correct position
• Prevents shifting that can lead to rattling, misalignment, or premature wear
• Provides a fixed attachment point for fasteners or clips
• Helps maintain proper gap and alignment for doors or covers

• Disconnect power and water before starting repairs
• Inspect surrounding fasteners and clips; replace any that are damaged
• Use basic hand tools; follow OEM diagram for orientation and screw locations

This outer cover protects and secures the catalyzer element, keeping it in position and shielding it from debris and contact damage. It helps maintain safe operation by preventing movement and minimizing noise from a loose element. What it does

• Protects the catalyzer element from physical damage and foreign debris
• Holds the catalyzer element securely in its mounting location
• Reduces vibration and rattling that can occur with a loose or damaged cover
• Helps maintain correct airflow/clearance around the catalyzer element

• Disconnect power (and gas supply where applicable) before beginning work
• Handle the part carefully to avoid bending or cracking the cover
• Reuse original fasteners only if undamaged; otherwise replace with OEM-specified hardware

Insulation panel set that installs inside your wall oven door to provide heat retention. Replace if panels are cracked, deteriorated, or missing.

This replacement door frame restores the dishwasher door's outer trim and supports attached panels and hardware for a finished appearance. It helps secure the door assembly and keeps internal components aligned for normal operation. What it does:

• Replaces a damaged, dented, or bent door trim to improve looks and door fit
• Provides a mounting surface for clamps, seals, and exterior panels
• Helps maintain proper door alignment to reduce leaks and closing issues
• Restores the structural edge that protects internal components from damage

• One door frame (trim) as pictured

• Disconnect power and water supply before starting any repair
• Remove the door panel and any attached hardware to access the frame; retain fasteners for reassembly
• Reinstall panels and verify door alignment and seal before restoring service

Uneven baking or hot spots in your wall oven? The heat reflector directs heat evenly across the oven cavity for consistent cooking results.

205 degrees fahrenheit.

311 degrees fahrenheit.

311 degrees fahrenheit.

311 degrees fahrenheit.

311 degrees fahrenheit.

Restores bright illumination in your oven or appliance. Replace when bulb burns out or flickers to maintain visibility. Confirm fit by model number.

This inner door panel restores the oven's inner door surface and helps protect the insulation and outer door from heat and wear. It's a direct-replacement interior panel for compatible Bosch single ovens. What it does:

• Replaces a damaged, scratched or dented inner door surface to help restore appearance and function
• Protects the oven's internal insulation and components from heat and spills
• Helps maintain proper door closure by restoring the inner door structure
• Reduces drafts or heat loss caused by a warped or damaged inner panel

• Oven door removal is required for most installations
• Disconnect power to the appliance before starting and allow the oven to cool completely
• Handle carefully to avoid damaging the panel or surrounding trim and to prevent injury
• Check manufacturer instructions for model-specific removal and reassembly steps

This cavity partition is the internal oven divider that maintains proper separation and airflow inside the cooking cavity for safe, consistent operation. It restores the oven's internal structure after damage or during repairs. What it does:

• Reestablishes the internal divider that separates oven compartments and supports correct airflow distribution
• Helps maintain even cooking by preserving the oven's designed cavity geometry
• Addresses symptoms like loose or missing interior panels, rattling inside the oven, or gaps in the oven wall
• Prevents contact between components that should remain separated, reducing risk of internal damage

• One cavity partition (single-piece) as shown

• Refer to the oven's service manual for correct placement and fastening sequence
• Disconnect power and allow the appliance to cool completely before servicing
• Handle edges with care; wear gloves to avoid cuts and protect finished surfaces
• If fasteners or clips are damaged or missing, replace them; part ships without additional hardware

Protective sleeve for wall ovens. Shields internal components from heat and damage. Replace if cracked, melted, or missing to maintain oven safety.

This rear panel is the oven back cover that protects internal components and helps maintain proper ventilation. It replaces damaged or missing back panels to restore a finished exterior and shielding for electronics. What it does

• Covers and protects the oven's internal wiring, heating elements, and components from debris and accidental contact
• Helps direct ventilation and air flow from the oven cavity to the exhaust/chassis openings
• Stops drafts and reduces dust entry that can cause component issues or noise
• Common symptom: bent, rusted, punctured, or missing back panel; visible gaps, rattling, or unusual odors

• One rear panel

• Disconnect power to the appliance before starting any repair
• Use proper tools; panel may be secured with screws and attached to sheet-metal edges
• Panels can have sharp edges—wear gloves and eye protection
• Removing/installing may require pulling the appliance away from cabinetry; check your model's service manual for model-specific disassembly steps

Replacement resistor support plate for electric wall ovens. Secures heating element resistor in place. Order a new one if original is cracked or broken.

Oven not heating or baking unevenly? This bake element restores proper heating. DIY-friendly repair typically takes 10-20 minutes with basic tools.

M3 x 12mm mounting screw for wall ovens. Secures internal panels, components, and trim. Replace if missing, stripped, or damaged during repairs.

M3.9 x 9.5mm mounting screw for wall ovens. Secures internal components and panels. Replace if stripped, missing, or damaged during service.

M4.2 x 13.5mm mounting screw for wall ovens. Replaces lost, stripped, or damaged screws that secure panels and components during installation or repair.

M4.2 x 9.5mm mounting screw for wall ovens. Secures interior panels, brackets, and components. Replace if stripped, missing, or damaged during repairs.

M5 x 10mm mounting screw for wall ovens. Secures internal components and panels. Replace if stripped, missing, or corroded during repairs.

Heat shield for wall ovens. Protects internal components from excessive heat. Replace if cracked, warped, or damaged to maintain proper insulation.

Door handle slat for electric wall ovens. Replaces cracked, broken, or worn slats on the oven door handle assembly. Restores appearance and function.

Replacement door spacer for your wall oven. This small component maintains proper door alignment and spacing. Order now if yours is cracked or missing.

Circuit board spacer for wall ovens. Maintains proper spacing between electronic control boards. Replace if broken, cracked, or missing to prevent board damage.

Stop ring for electric wall ovens. Installs on control components to secure and position parts. Replace if cracked, broken, or missing to restore fit.

Threaded spacer for wall oven door handles. Installs between handle and door to maintain proper spacing. Replace if cracked, stripped, or missing.