Parts for Gaggenau EB271-600: 02 - Cavity Parts

This oven temperature sensor probe measures internal oven temperature so the control can regulate heating cycles for more consistent cooking results. It replaces a failed probe that no longer reports correct oven temps. What it does:

• Sends live temperature readings to the oven control so heating elements are cycled correctly.
• A failing sensor can cause the oven to not reach temperature, run too hot/too cold, or show temperature-related error codes.
• Restores reliable temperature feedback for more even baking and roasting.
• Plugs into the oven's existing connector and mounts inside the oven cavity.

• Disconnect power at the breaker or unplug the appliance before starting work.
• Allow the oven to cool completely; sensor and surrounding parts may be hot.
• Handle the probe carefully—it's a delicate sensing element; avoid bending or damaging the tip.
• Verify proper operation after installation.

A female door latch that secures the appliance door and ensures a proper close for safe operation. Replaces a worn or broken latch to restore reliable door engagement and help the appliance start normally. What it does:

• Secures the door by engaging the corresponding door striker so the appliance can run
• Helps prevent the door from popping open during operation
• Commonly replaced when the door won't stay closed or the unit displays a "door"/won't-start symptom
• Fits the OEM latch location and mates with the matching male striker to restore proper function

• One female door latch

• Disconnect power (and gas, if applicable) before servicing
• Remove the outer door panel or access panel as required to reach the latch assembly
• Align the latch with the striker and secure fasteners; test door engagement before reassembly

This broil element is the oven's top heating element that provides direct radiant heat for broiling and finishing foods. It restores high-heat performance so broil functions heat and brown food as intended. What it does:

• Radiant heating element for the oven's broil function; heats from the top of the oven cavity
• Replaces a broken or burned element that fails to glow or reach broil temperatures
• Helps correct uneven browning or lack of searing during broiling
• Fits into the oven cavity and connects to the oven's internal terminal block

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the oven to cool completely before removing the old element
• Use proper tools to remove mounting screws and carefully disconnect terminal connectors
• After installation, restore power and verify broil function; do not operate with exposed wiring

This control panel lens cover protects the oven's display and touchpad area from spills, scratches and everyday wear while keeping the display visible and looking finished. It restores the appliance's appearance and helps prevent damage to the underlying controls. What it does

• Shields the display and control buttons from food splatter, grease and scratches.
• Keeps the display readable by reducing direct contact and surface damage.
• Replaces cracked, chipped or yellowed lens surfaces that obscure the control panel.
• Helps prevent moisture from directly contacting the control electronics when properly seated.

• One lens cover for the control panel.

• Disconnect power to the appliance before starting any work.
• Typically installs by removing the control panel trim or bezel; handle the lens by the edges to avoid fingerprints.
• Inspect mounting tabs or clips for damage and align carefully before snapping or fastening into place.
• If screws or additional trim are required, reuse OEM fasteners.

A flexible replacement gasket that seals and side lamp glass, cushioning and securing the glass to help block moisture and debris from the lamp housing. Restores a tighter fit and reduces vibration or rattling around the lamp area. What it does:

• Seals the edge of the lamp glass to keep moisture, dust and food debris out of the lamp housing.
• Cushions and centers the lamp glass to reduce vibration and prevent rattling or glass movement.
• Helps maintain a stable lamp assembly so the light cover sits flush and stays in place.
• Use when the gasket is cracked, torn, deformed or missing, or when the lamp glass feels loose.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle lamp glass carefully to avoid breakage; wear gloves and eye protection as needed.
• Seat the gasket evenly around the lamp glass edge and press into the channel until fully seated; avoid stretching or deforming the seal.
• Replace only with the exact OEM part number to ensure correct fit and sealing.

This convection diffuser panel directs heated air in the oven cavity for more even cooking and provides mounting openings for the rotisserie motor. It replaces a damaged or missing diffuser to restore airflow and accessory fit. What it does:

• Channels convection airflow across the oven cavity to help even temperature distribution and more consistent baking or roasting.
• Provides factory-aligned openings for the rotisserie motor and hardware so the rotisserie accessory mounts correctly.
• Replaces bent, corroded, or otherwise damaged panels that can disrupt airflow or interfere with rotisserie use.
• Can reduce symptoms like uneven cooking, hot/cold spots, or difficulty installing the rotisserie motor (when panel damage is the cause).

• Disconnect power to the appliance before beginning any service to avoid shock or injury.
• Basic removal of interior oven components may be required; follow the appliance service manual for specific steps.
• Handle edges and openings carefully — part may have sharp metal edges.