Parts for Gaggenau EB965-610: 02 - Cavity Parts

This is the door latch assembly that secures the oven door in the closed position during cooking and the self-clean cycle. It engages with the door strike to keep the door locked, particularly during high-temperature cleaning. Replace this latch if the oven door will not lock for self-clean, the door does not stay closed, or the latch mechanism is visibly broken.

This halogen bulb socket connects and secures the oven light bulb so the interior light works reliably when the door is opened or the light switch is used. Replaces a worn or damaged socket to restore a solid electrical connection. What it does:

• Holds the halogen oven light bulb in place and provides the electrical contacts to power the lamp
• Commonly used when the oven light flickers, won't turn on, or the bulb becomes loose
• Maintains correct alignment and insulation for safe bulb operation
• Designed for direct replacement of the original socket in compatible ovens

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Allow the oven and bulb to cool completely before touching components
• Handle halogen bulbs with a clean cloth or gloves; oils from skin can shorten bulb life

This Halogen Bulb is an OEM part for Bosch Ranges. It provides illumination for the range's interior. Continuous use or high temperatures can cause the bulb to burn out or fail.

What Causes a Bad Halogen Bulb: 
Repeated heating and cooling cycles, along with continuous use, can cause the halogen bulb to burn out or break.

Symptoms of a Bad Halogen Bulb:

• The bulb is not lighting up
• Visible signs of damage or a broken filament
• Flickering or intermittent lighting

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a small plug used to seal an opening or cap an unused port on a range or oven. It helps maintain the appliance's structural integrity and prevents moisture or debris from entering internal components. Replace this plug if it is cracked, missing, or no longer seating securely in its designated opening.

Fix uneven baking or loose heating elements with this oven bake element holder. Secures the element in place for proper heat distribution. Quick repair.

Light socket for your range. Installs in the oven cavity or cooktop area to hold the interior light bulb. Replace if cracked, damaged, or no longer secure.

This high-temperature 220V, 15-watt oven light bulb restores bright interior lighting so you can monitor cooking progress without opening the door. It's built for sustained heat and replaces a burned-out or flickering lamp.

• Illuminates the oven cavity during baking, broiling, and cleaning cycles
• High-temperature design for continuous heat exposure
• Common failure symptoms: no light when switched on, dim or intermittent illumination, blackened glass, or a broken filament

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the light lens/cover; unthread and remove the old bulb
• Thread in the new bulb of the same voltage and wattage; do not overtighten
• Reinstall the cover, restore power, and test the light

This genuine mounting bolt secures appliance components and brackets to keep panels and assemblies fastened and stable for safe operation. A simple replacement for loose or missing hardware. What it does:

• Secures mounting brackets, panels or components in place to prevent shifting or rattling
• Restores proper fit where a worn, stripped or missing bolt caused loose parts
• Helps eliminate vibration noise and improve component alignment
• Matches OEM fit and function for reliable fastening

• Disconnect power and water before accessing the part
• Use the correct size wrench or socket to avoid rounding the head
• Tighten securely but do not over-torque; replace with same type if damaged
• If threads are stripped or mating parts are damaged, replace the mating hardware

This spacer positions and stabilizes nearby components to ensure proper fit and spacing during appliance assembly. It helps prevent rubbing and maintains correct panel and bracket alignment for quieter, more reliable operation. What it does:

• Keeps fixed parts correctly spaced to prevent contact and wear
• Stabilizes panels or brackets to reduce vibration and noise
• Restores proper alignment when gaps or looseness are present
• Supports fastener placement for secure reassembly

• Disconnect power and water before starting any repair
• Inspect surrounding hardware and replace any damaged fasteners before reinstalling the spacer
• Handle carefully to avoid deforming; install in original orientation and location

Protective cover for the temperature probe on your appliance. Replace if the cover is cracked, broken, or missing to protect the probe sensor assembly.

This is a sealing gasket that fits around the oven lamp frame to prevent heat, moisture, and grease from entering the light housing. It maintains a tight seal between the lamp assembly and the oven cavity wall. Replace this seal if you notice moisture or grease buildup inside the lamp cover, if the gasket appears cracked, hardened, or deteriorated, or if the oven light housing is not properly sealed.

Replace a non-heating broil element in your oven. This broil element restores proper broiling function. Typical repair takes 30-45 minutes.

Seals the heating element opening to maintain proper heat and prevent leaks. Replace when worn or damaged to restore efficient operation. Confirm fit.

Fix uneven baking and broiling with this oven convection ring element. Restores fan-forced cooking when the circular heating element fails. Moderate DIY.

This is a blower fan motor that circulates hot air inside the oven cavity, typically used in convection cooking systems. It drives the fan behind the rear oven wall panel to distribute heat evenly for more consistent baking and roasting. Replace this motor if the convection fan stops spinning, makes unusual noises, or if food cooks unevenly despite correct temperature settings.

This replacement gasket seals the dishwasher door to help prevent water leaks and keep wash cycles contained. It restores the door's watertight seal and helps reduce noise and moisture escape. What it does:

• Creates a watertight seal around the dishwasher door to help prevent leaks during operation
• Keeps spray and steam inside the tub for reliable cleaning performance
• Replaces cracked, flattened, or worn gasket material that can cause visible leaks
• Reduces moisture buildup and helps limit odors from trapped water

• One door gasket

• Disconnect power and water supply before starting any repair
• Remove the old gasket, clean the channel of debris and residue, then seat the new gasket evenly into the door channel
• Avoid using sharp tools that could nick the new seal; press firmly but gently to ensure full contact
• Run a short test cycle and inspect for leaks before returning the dishwasher to normal use

This fixing sheet is a small mounting plate used to secure internal panels or components in place, helping maintain proper alignment and reduce movement. It restores fit and stability where the original sheet is damaged or missing. What it does:

• Provides a secure mounting surface to hold panels, brackets, or components in place
• Helps prevent rattling, vibration, or misalignment caused by loose or missing hardware
• Restores factory fit where an original fixing sheet is bent, cracked, or missing
• Supports proper operation by keeping parts aligned and reducing wear from movement

• Designed for use in specific appliance locations; verify placement against your model's parts diagram
• Install with the correct screws or clips; retainers are not always included
• Disconnect power and water before accessing internal panels

This metal mesh grease filter captures airborne grease and large particles from range hood airflow to help keep the vent and exhaust path cleaner and reduce greasy buildup on internal components. What it does:

• Traps cooking grease and large particulates before they reach the blower or ducting
• Helps reduce greasy residue and buildup on internal hood surfaces
• Can improve airflow consistency when the filter is clean
• Common symptom: heavy visible grease, dark film on the filter, or smoke/odors not clearing effectively

• Turn off power to the range hood or vent before servicing
• Remove the old filter per the hood's access method (clips, slides, or screws), then insert the replacement securely
• Clean or replace regularly per the appliance owner's manual; do not operate with a damaged filter