Parts for Whirlpool IM41000: 03 - Agitator, Basket And Tub Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace your cracked or missing washer agitator cap to restore appearance and protect internal fasteners. White plastic cap snaps on easily in minutes.

This agitator Bolt is an OEM replacement part for Whirlpool washing machines. It is a crucial component for maintaining the performance of various washing machines and washer-dryer combos. This agitator bolt secures the agitator, ensuring smooth and efficient operation. The kit includes one 7/16" screw head bolt with a rubber gasket and threaded sealant.

Causes of a faulty bolt can be damage from mineral deposits accumulation preventing smooth tightening, or wear over time compromising the threading. 

Symptoms of a bad agitator bolt include:  

• Loose or wobbly agitator unable to spin freely
• Abnormal noises or vibrations during cycles  
• Insufficient cleaning from improper agitation
• Safety concerns if the agitator detaches entirely

This OEM replacement part is also compatible with  Inglis, Estate, Admiral, Crosley, Roper, Magic Chef, Amana, KitchenAid, Maytag, Whirlpool, and Kenmore brand models.

Seals the joint between your washer's outer tub and tub ring to prevent leaks. Replace if you notice water escaping during wash cycles.

Liquid-filled balance ring mounts on top of the spin basket. Replace if cracked, leaking, or detached to restore smooth spinning and reduce vibration.

Price Per Each

Noisy spin cycle or loose tub? This spanner nut secures the washer tub to the drive shaft. Requires spanner wrench for installation. DIY-friendly.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This genuine OEM part is an outer tub for washers. The outer tub is the main tub where clothes are set to wash. If the tub is no longer spinning properly or is making a loud noise as it rubs against the washer, it will need to be replaced. Thankfully, replacing this part is a relatively simple process.To replace the outer tub, start by making sure the washer is unplugged. After that, remove the front panel of the washer. Once removed, lift up the top panel so that it is no longer covering the outer tub. Next, locate the mounting bolts that secure the tub and unthread them using a socket wrench. Once removed, lift the tub out from the washer. Replace with the new tub and secure the mounting bolts. Reinstall the front panel and plug the washer back in. This replacement part is sold individually and is compatible with Whirlpools, Maytag, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washers.

The Washer Drive Block is an OEM part for Whirlpool washing machines. This component is situated between the washer's transmission and the inner tub, playing a key role in transferring the rotational motion from the motor to the tub. 

Causes for replacement often stem from normal wear and tear, which can lead to the drive block becoming worn or damaged. This wear can prevent the drive block from properly engaging with the tub, leading to inefficient cycles and potential damage to other parts of the washing machine.

Symptoms of a bad Washer Drive Block include:

• The washer tub has difficulty agitating or spinning.
• A loud noise during the spin cycle, indicating that the tub is not engaging correctly with the transmission.
• The machine vibrates excessively or seems off-balance, even with a balanced load.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Seals the center post/agitator shaft to prevent water leaks during wash cycles. Replace if you notice pooling water under your washer. Confirm fit with your model.

Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.

Agitator not moving clothes properly or spinning weakly? This straight-vane agitator restores wash action in 10 minutes with basic hand tools.

Rubber washer that seals beneath the agitator bolt to secure the agitator to the drive shaft. Replace if agitator loosens or leaks occur. Verify fit.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.