Parts for Electrolux PCFG3080AFB: 03 - Burner Parts

The Burner Valve is an OEM component specifically designed for Frigidaire ranges. It controls gas flow to individual burners, providing a selection of different heat levels when operating the cooktop.

Causes of a bad burner valve can include wear over extended usage periods, damage from water, or gas blockage impeding operation. 

Symptoms of a bad burner valve include:

• Inability to light specific burners or adjust the flame height
• Uneven or intermittent burner performance  
• Gas leaks at burner valve connections
• Recurring error codes due to valve malfunctions

Replacing with this OEM valve restores full functionality to the range cooktop. Compatible with existing gas lines, it supports safe and reliable cooking performance.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace before issues worsen.
 

Fix a burner that won't light or sparks without gas flow. This surface burner valve controls gas to one burner. Replace if knob turns but burner won't ignite.

This is a top burner gas valve that controls the flow of gas to a surface burner on a gas range. It connects to the burner control knob and regulates the flame from low to high settings. Replace this valve if a surface burner won't ignite, the flame is difficult to adjust, or you detect a gas smell even when the knob is in the off position.

Gas burners won't ignite or igniter clicks continuously? The spark module generates the electrical spark to light burners. Direct plug-in repair.

This extra-large burner crown replaces the outer decorative cap on a cooktop surface burner, restoring proper flame distribution and cookware support for large pots and pans. Durable finish helps maintain even heating and appearance. What it does:

• Covers and protects the burner head while directing flames for even heating
• Supports large cookware on the cooktop surface
• Can reduce uneven or weak flames caused by a damaged or warped crown
• Restores proper fit and appearance for an extra-large surface burner

• One extra-large burner crown

• Ensure the cooktop is completely cool and gas or power is turned off before starting
• Remove and replace gently to avoid bending the burner head; no special tools usually required
• Follow the appliance manufacturer's instructions and safety guidelines

Medium burner crown for gas cooktops and ranges. Sits atop the burner base to shape and distribute flame. Replace if cracked, chipped, or damaged.

Small crown-style burner cap for gas cooktops. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or missing.

Oven won't heat or takes forever to preheat? This hot surface igniter lights the bake burner in gas ranges. Moderate DIY repair, about 30 minutes.

Oven won't heat or takes forever to preheat? This hot surface igniter glows to ignite your gas range's bake burner, restoring consistent oven heating.

Regulates gas flow from the supply line to your range burners. Replace if cracked, leaking, or damaged to restore proper fuel control and flame size.

Snap-on burner cap for gas cooktops and ranges. Restores finished appearance and protects components. Replace if cracked, chipped, or missing.

Replacement burner cap for gas cooktops and ranges. Covers and protects the burner assembly. Needed when original cap is cracked, broken, or missing.

Replace a cracked, chipped, or missing burner cap on your gas range or cooktop. Restores a clean look and protects the burner assembly underneath.

Gas range won't ignite or heat properly? This safety valve controls gas flow to burners and oven. Straightforward replacement restores reliable operation.

Fix an oven that won't heat or takes too long to preheat. This igniter glows but may be too weak to open the gas valve. DIY repair in under an hour.

Replacement mounting bracket for gas ranges. Secures panels and components in place. Install when original is cracked, bent, broken, or missing.

This is a gas supply tube that connects the regulator to the safety valve on a gas range. It carries gas from the pressure regulator to the safety valve assembly, ensuring proper fuel delivery to the burners or oven. Replace this tube if you detect a gas smell near the connection points, notice visible corrosion or cracks, or if the tube is leaking.

This replacement tube routes water to the ice maker or dispenser so your appliance can fill ice trays and dispense water reliably. It restores a sealed water path to prevent leaks and ensure proper filling. What it does

• Carries water from the supply or valve to the ice maker or dispenser
• Restores proper ice maker fill and water dispensing when a cracked or clogged tube is causing underfilling
• Helps stop leaks by replacing brittle, split, or deteriorated tubing
• Works with the appliance's existing fittings and clamps to maintain a sealed connection

• One replacement water tube

• Turn off the water supply and unplug the appliance before starting work
• Inspect fittings and clamps; reuse if undamaged or replace with equivalent clamps for a secure seal
• Confirm tube routing matches the original to avoid kinking or interference with moving parts

This is the gas supply tube that delivers gas from the main valve to the bake burner at the bottom of the oven. It ensures a steady flow of gas for proper heating during baking. Replace this tube if you smell gas near the oven, the bake burner won't ignite, or you notice visible damage, corrosion, or cracks in the existing tube.

Replace your gas range burner tube assembly when damaged, cracked, or missing. This component connects the gas valve to the burner, ensuring proper fuel delivery.

Replacement screw for gas range panels and components. Needed when original fastener is missing, stripped, or damaged to restore secure fit and alignment.

This screw is a factory replacement fastener used to secure panels, trim, or internal components so parts stay aligned and stable during normal use. It restores proper fit and reduces rattles from loose hardware. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Restores proper alignment when hardware is missing or worn
• Helps stop vibration or rattling caused by loose or missing fasteners
• Replaces stripped, damaged, or lost screws to allow correct reassembly

• Screw

• Disconnect power and water to the appliance before servicing when applicable
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• Wear gloves to protect hands from sharp edges and steady small parts during installation

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.