Parts for Maytag MAV9657EWQ: 03 - Control Panel & Top Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a genuine replacement mounting screw used to secure appliance components and panels. It restores proper fit and prevents movement that can cause noise or misalignment. What it does:

• Fastens panels, brackets, and small components in place
• Helps stop rattling or vibration caused by loose hardware
• Restores secure attachment after stripped or missing fasteners
• Matches OEM thread and head style for correct fit

• Use the correct driver to avoid stripping the head
• Tighten until snug; do not overtighten to prevent damage
• Disconnect power to the appliance before accessing internal components
• Replace matching screws in the area for consistent fit

Plunger for lid switch.

This plunger guide tube aligns and supports a moving plunger within the washer's mechanism so it travels smoothly and engages reliably. Replacing a worn or cracked guide can restore consistent operation and prevent sticking or misalignment issues.

• Keeps the plunger centered for straight, low-friction movement
• Helps prevent sticking/binding that can stop the mechanism from engaging
• Common symptoms: intermittent or failed actuation, weak or no dispensing/engagement, clicking from a solenoid with no movement
• Visual clues: worn, cracked, or deformed guide tube

• Disconnect power and turn off water supply before servicing.
• Access location varies by model; remove covers or panels to reach the affected dispenser/actuator assembly.
• Note orientation and seating depth; transfer any springs or retainers from the old guide if present.
• The plunger moves freely in the new guide before reassembly and testing.

Color: Biscuit.

Color: Biscuit.

This washer lid switch is the safety interlock that tells the machine the lid is closed. Replacing a worn switch restores proper spin and cycle operation and helps prevent nuisance shutoffs when the lid is bumped or opened.

• Detects lid position and enables washer operation only when the lid is closed
• Interrupts power with the lid open for user safety
• Typical symptoms of failure: washer won't start or won't spin, stops mid-cycle, or runs only when pressing down on the lid
• Mechanical position sensor; it does not lock the lid

• Disconnect power before servicing; verify the tub is fully stopped
• Access is typically from the main top or cabinet—remove screws or release spring clips as designed
• Note wire routing and mounting orientation; transfer any existing hardware and secure the ground as originally installed
• Test lid-close operation before reassembling and running a cycle

Screw: 8-16 x 3/8 inch.

This is a genuine replacement mounting screw used to secure appliance components and panels. It restores proper fit and prevents movement that can cause noise or misalignment. What it does:

• Fastens panels, brackets, and small components in place
• Helps stop rattling or vibration caused by loose hardware
• Restores secure attachment after stripped or missing fasteners
• Matches OEM thread and head style for correct fit

• Use the correct driver to avoid stripping the head
• Tighten until snug; do not overtighten to prevent damage
• Disconnect power to the appliance before accessing internal components
• Replace matching screws in the area for consistent fit

Color: Biscuit.

This hinge bushing is the low-friction sleeve the hinge pin pivots in. Replacing a worn bushing restores smooth, quiet door or lid movement, keeps alignment true, and helps the appliance close cleanly while reducing hinge wear.

• Provides a smooth pivot surface between the hinge pin and bracket
• Helps maintain alignment so the door or lid closes flush
• Reduces squeaking, grinding, or binding when opening/closing
• Replaces cracked, flattened, or missing bushing that can cause sagging or scraping

• Disconnect power (and water supply if applicable) before servicing.
• Support the door or lid before removing hinge fasteners; note the order of spacers/washers.
• Remove the worn bushing, seat the new bushing fully, and reassemble in the same orientation.
• Inspect the hinge pin and bracket for wear; replace related parts if they are damaged.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Color: White.

Color: Biscuit.

The Timer Knob Cap is an OEM replacement part for Whirlpool washers and dryers. This cap covers the timer knob, giving a clean and polished appearance to the control panel.

Color: Chrome

The Timer Knob Cap might need replacement if it becomes cracked, discolored, or damaged due to prolonged use, accidental mishandling, or exposure to harsh cleaning agents. Additionally, frequent turning and adjustments over time may cause wear.

Symptoms of a failing Timer Knob Cap include:

• Difficulty turning the timer knob
• Loose or missing cap
• Timer knob slipping or not staying in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: chrome. The main part of the knob is about 1 inch in diameter. The handle is about 2 inches.

This rotary oven selector switch controls oven functions and temperature selection so the range operates reliably and you can choose the correct cooking mode. Designed to replace a worn or non-working selector control. What it does:

• Selects oven mode (bake, broil, etc.) and communicates the chosen setting to the control system
• Restores responsive control when the selector is stiff, intermittent, or fails to click into positions
• Helps eliminate incorrect oven operation or inability to change cooking modes
• Works as the user-facing control for oven function selection on compatible ranges

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Access typically requires removing the control panel or console; handle glass and trim pieces carefully
• Verify alignment and detents before reassembling to ensure proper function

This infinite pressure switch senses air pressure in the dryer's vent/airflow system and helps regulate the heating circuit for consistent, safe operation. It restores proper pressure feedback so the dryer heats and cycles correctly. What it does:

• Monitors vent/airflow pressure and signals the control to allow or stop the heating circuit
• Helps prevent the burner or heating element from staying on when airflow is restricted
• Commonly replaced when a dryer fails to heat, heats erratically, or has no ignition
• Works as part of the safety and control system for dryer heat management

• One infinite pressure switch

• Disconnect power to the appliance before beginning any service
• Note wire locations or take a photo before removing connectors; replace like-for-like
• Inspect and replace any damaged vacuum/air tubing; ensure secure, leak-free connections

Specs: No.8X1/2 HEX WASHER HEAD

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.