Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Maytag MAH21PDCXW: 03 - Top Parts

Parts for Maytag MAH21PDCXW: 03 - Top Parts

Location on Diagram
Part Description
Price & Availability
Best Seller
Product photo
5.0 (9)
By: Whirlpool
Part Number: W10501250

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

More
$28.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
001
By: Whirlpool
Part Number: 22004179
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

001
Product photo
By: Whirlpool
Part Number: 22004181
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

001
By: Whirlpool
Part Number: 22004178
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

002
Product photo
5.0 (6)
By: Whirlpool
Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

  • Fastens a hose to a barb or port to prevent leaks
  • Helps keep hoses from slipping off due to vibration or pressure
  • Restores proper sealing when a clamp is rusted, bent, or stripped
  • Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten
What's included: 1 hose clamp Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Place a towel to catch residual water when removing hoses
  • Position the clamp just behind the hose barb/bead and secure with the appropriate tool
  • Restore water and power, then run a quick check for leaks at the connection

More
$7.49

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
003
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP22002941

Replace your cracked or broken washer dispenser lid to restore proper detergent dispensing. Straightforward DIY repair that covers the dispenser cavity.

More
$37.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
004
Product photo
By: Whirlpool
Part Number: WP22003665

This dispenser bezel is the exterior trim piece that surrounds and protects the refrigerator dispenser area, restoring a clean appearance and proper fit so cups and containers align with the dispenser outlet. What it does:

  • Provides the finished trim around the dispenser opening and helps guide cups to the water/ice outlet
  • Covers and protects internal dispenser components from damage and debris
  • Restores proper alignment and appearance when the original bezel is cracked, chipped, or broken
  • Helps prevent small items from getting behind the dispenser area
What's included:
  • One dispenser bezel
Install notes:
  • Disconnect power (and water supply if needed) before starting work to prevent shock or leaks
  • Removal/installation may require removing the dispenser front assembly or fasteners; keep track of screws/clips
  • Handle the bezel carefully to avoid scratching the finish during installation

More
$53.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
005
Product photo
4.9 (14)
By: Whirlpool
Part Number: WP6-912678

This is the longer of the two dispenser lid hinge pins. For the shorter lid hinge pin order WPY912679.

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
006
Product photo
4.9 (16)
By: Whirlpool
Part Number: WPY912679

This is a small metal or plastic hinge pin that secures the detergent dispenser door on the dishwasher's inner door panel. It allows the dispenser cover to pivot open during the wash cycle to release detergent. Replace this pin if the dispenser door falls off, won't stay closed, or fails to open properly during a cycle.

More
$4.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
007
5.0 (7)
By: Whirlpool
Part Number: W11772394
$11.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
008
Best Seller
Product photo
4.9 (17)
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

More
$9.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
009
Product photo
By: Whirlpool
Part Number: 22003259
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

010
Best Seller
Product photo
4.9 (17)
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

More
$9.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
011
Product photo
By: Whirlpool
Part Number: 22003321
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

012
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP22002266
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

012
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP22003849
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

013
Product photo
By: Whirlpool
Part Number: WP22003848

Located in the detergent dispenser drawer, this small cup creates suction to draw liquid detergent into the wash cycle. Replace it if detergent remains in the dispenser after cycles or if dispensing becomes inconsistent.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

013
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP22002265

The siphon cup is part of the detergent dispenser system inside your washer and creates proper suction for dispensing liquids. Replace when fabric softener or bleach doesn't dispense correctly or remains in the dispenser after cycles.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

Best Seller
Product photo
5.0 (9)
By: Whirlpool
Part Number: W10501250

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

More
$28.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
014
Product photo
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
015
By: Whirlpool
Part Number: 22002551
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

016
By: Whirlpool
Part Number: 22003634
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

017
Product photo
By: Whirlpool
Part Number: 22003457
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

018
By: Whirlpool
Part Number: 22003723
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

018
Product photo
By: Whirlpool
Part Number: 22003320
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

018
Product photo
By: Whirlpool
Part Number: 22003322
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

019
5.0 (7)
By: Whirlpool
Part Number: W11772394
$11.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
020
Product photo
5.0 (1)
By: Whirlpool
Part Number: 22003845
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

021
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP22003844
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

022
Product photo
By: Whirlpool
Part Number: 22003321
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

023
Product photo
By: Whirlpool
Part Number: 22003832
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

023
Product photo
5.0 (1)
By: Whirlpool
Part Number: 22003833

This is a rubber hose that connects to the tub fill nozzle inside the washing machine, directing water into the wash tub during the fill cycle. It ensures water flows properly from the inlet valve to the tub. Replace this hose if you notice water leaking inside the cabinet, reduced water flow into the tub, or if the hose has become cracked or brittle.

More
$68.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
023
Product photo
5.0 (1)
By: Whirlpool
Part Number: 12001929

Replace worn water inlet valve seals to stop leaks and restore flow. Install when seals are cracked or flattened. Confirm fit with your washer's model number.

More
$4.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
023
Product photo
5.0 (7)
By: Whirlpool
Part Number: 12001930

New seals come with this valve.

More
$117.59

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
023
Best Seller
Product photo
4.9 (17)
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

More
$9.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Product photo
5.0 (9)
By: Whirlpool
Part Number: W10501250

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

More
$28.43

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google