Parts for Speed Queen AEM477W2: 04 - Fr Blkhd, Air Duct, Felt Seal & Cylinder Parts

This part has been discontinued and is no longer available.

This appliance screw replaces a missing or damaged fastener to secure panels and brackets. With a 10B-16 thread and 0.34-inch length, it restores a tight fit to help reduce vibration, rattles, and loosening.

• Fastens sheet-metal parts, brackets, and covers in the appliance cabinet
• Helps maintain alignment and support of components subject to vibration
• Direct replacement for stripped, rusted, or missing hardware
• Can help resolve symptoms like loose panels, rattling noises, or gaps

• Disconnect power; shut off gas/water as applicable before servicing
• Start threads by hand in the original hole or clip to avoid cross-threading
• Tighten snugly without overtightening to prevent stripping
• If the receiving clip/nut is damaged, repair or replace it for a secure hold

Color: white. It measures about 16 inches wide by 3 inches high.

The Dryer Drum Felt Seal is an OEM part for Whirlpool dryers. This seal ensures a tight fit between the dryer drum and the rear bulkhead, preventing air leaks and maintaining proper drum alignment during the drying cycle. The seal measures approximately 36 inches in length and 1 inch in width. Please note, adhesive for installation is not included. 

Causes of a bad felt seal can include friction from the rotating drum, exposure to high temperatures, or general wear and tear over time.

Symptoms of a bad felt seal include:

• Clothes getting caught or torn during the drying cycle
• Increased drying times due to air leaks
• Unusual noises such as scraping or squeaking
• Visible gaps or tears in the felt seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For adhesive order WPY055980.

This white baffle cylinder is the replaceable tub/agitator baffle that helps move and separate laundry during the wash cycle for proper cleaning action. It restores agitation and water flow when the original baffle is worn or damaged. What it does:

• Channels water and works with the agitator/tub to help move clothes for improved washing action
• Helps reduce tangling and keeps items circulating through the wash zone
• Replaces cracked, broken, or excessively worn baffles that cause poor agitation or noisy operation
• Matches the original white finish for a factory appearance

• Disconnect power and water supply before beginning any repair
• Basic tools typically required; may need to remove agitator or access cap—refer to your model's service manual
• Inspect mating surfaces and fasteners; replace any worn hardware and ensure proper seating to avoid agitation issues

The Dryer Drum Glide is an OEM replacement part for Whirlpool dryers. It is designed to facilitate smooth rotation and movement of the dryer drum during operation. The glide supports the drum, reducing friction and ensuring proper alignment.

Causes of a bad dryer drum glide can include wear and tear over time, exposure to excessive heat or vibration, or damage from foreign objects or improper installation.

Symptoms of a bad dryer drum glide:

• Loud rumbling or grinding noises during the drying cycle
• Excessive vibration or shaking of the dryer
• Difficulty in rotating the drum manually
• Uneven drying or clothing becoming tangled

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Glide Felt Pad is an OEM part for Whirlpool dryers. It is located at the front of the dryer drum. It provides a smooth surface for the drum to glide on, reducing friction and allowing it to rotate freely. This helps to prevent excessive wear and noise during the drying cycle.

Causes of a faulty or damaged dryer glide felt pad can include regular wear and tear, accumulation of lint or debris, or accidental mishandling. These factors can result in issues such as squeaking or grinding noises, uneven drum rotation, or damage to the drum.

Symptoms of a bad dryer glide felt pad may include:

• Squeaking or grinding noises during operation
• Uneven drum rotation or wobbling
• Excessive wear or damage to the drum

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

A replacement bracket glide that secures and guides an appliance drawer or shelf glide so drawers open and close smoothly. Installing a new bracket restores proper alignment and helps prevent sticking, sagging and noisy operation. What it does:

• Supports and guides the drawer/glide assembly for smooth, even movement.
• Keeps the drawer aligned so it does not bind, tip or come off the track.
• Reduces scraping, grinding or rattling noises caused by a damaged bracket.
• Common symptom: drawers that stick, sag, pull to one side, or feel loose.

• Disconnect power (or unplug) and empty the drawer before you start.
• Remove the drawer or access panel to reach the bracket; basic hand tools are usually required.
• Retain original fasteners unless the replacement explicitly includes new hardware.

(SOLENOID NOT AVAILABLE MUST ORDER ICE DOOR KIT 12001991)

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

• Secures panels, brackets, and internal components to their mounting points
• Replaces damaged, rusted, or missing hardware
• Helps stop vibration and rattling caused by loose fasteners
• Restores proper alignment and stability of covers or assemblies

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the original screw's location and length; replace one at a time
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
• Reinstall any original washers, clips, or spacers used with the screw