Parts for Electrolux ELTE760CAT0: 05 - Lower Cabinet / Top Parts

Replacement base for front-load washers. Provides structural support and stability. Order this part if your original base is cracked, broken, or missing.

This is a titanium-colored side panel for a washing machine. It attaches to the side of the washer cabinet to enclose and protect the internal components. Replace this panel if it is dented, rusted, cracked, or damaged during a move or installation.

Replace your washer's water deflector if it's cracked, broken, or missing. This part mounts inside the drum to guide water flow during wash cycles.

Suspension spring bushing absorbs vibrations and stabilizes the washer tub during operation. Replace if experiencing excessive noise or movement. Verify fit.

Secures the front panel to your washer frame. Replace this clip if your panel is loose, rattling, or won't stay in place due to a broken or missing clip.

This is a protective cover that shields the door lock mechanism on a washing machine. It helps prevent moisture, debris, and damage from reaching the door lock assembly. Replace this cover if it is cracked, broken, or missing, which could leave the door lock exposed and lead to premature lock failure or error codes.

Washer door won't lock or stay closed? This door lock secures your front-load washer during cycles. DIY repair takes 5-10 minutes with basic tools.

This cover fits over the door lock flange area on the front of the washing machine. It provides a finished appearance and protects the door lock mechanism from debris and moisture. Replace this cover if it is cracked, broken, or missing, which can leave the door lock assembly exposed and vulnerable to damage.

Replace your washer's damaged or worn front cabinet frame. Restores clean finish, proper alignment, and structural support for trim and components.

Replacement control panel button for front-load washers. Installs on the console to restore operation when original button is cracked, broken, or missing.

Suspension spring for front-load washers. Supports the drum and absorbs vibration during spin cycles. Replace if broken, detached, or stretched out.

This metal mounting bracket secures an internal appliance component to the cabinet or frame, restoring proper alignment and preventing vibration. Use this replacement to stabilize loose parts and reduce noise or movement. What it does

• Provides a stable attachment point to hold internal components in place
• Helps stop rattling, vibration, or shifting caused by a broken or bent mount
• Restores correct alignment so connected parts operate smoothly
• Works where a small structural support or fastener anchor is required

• Disconnect power and water before beginning any repair
• Use common hand tools; retain and reuse original fasteners unless damaged
• Handle edges carefully; wear gloves and eye protection when needed
• Verify proper alignment and torque of mounting screws during reassembly

Washer door hinge assembly that supports and allows the door to open and close smoothly. Replace if hinge is cracked, broken, or no longer securely mounts.

This is the inner glass for an oven door that restores a clear view of the oven cavity and helps the door seal properly. Replacing damaged or cracked inner glass improves visibility and helps maintain oven temperature. What it does:

• Replaces cracked, chipped or spiderwebbed inner oven door glass
• Restores a clear viewing window so you can monitor cooking without opening the door
• Helps maintain the oven's internal temperature by restoring the door's barrier
• Stops rattling or vibration caused by loose or broken glass pieces

• Allow the oven to cool and disconnect power before starting; glass can be sharp—wear cut-resistant gloves and eye protection
• Some models require partial door disassembly (hinges/retainers) to remove and install the inner glass—keep screws and small parts organized
• Handle glass carefully to avoid damage; do not overtighten fasteners which can crack the glass
• Follow OEM instructions or a model-specific repair guide for proper reassembly and safety checks

Broken door latch preventing your washer from starting? This door latch secures and locks the door during cycles. DIY repair takes under 10 minutes.

This replacement refrigerator door magnet helps the door stay tightly closed so the appliance maintains proper temperature and efficiency. It restores the magnetic seal that keeps cold air in and warm air out. What it does:

• Replaces a worn or broken door magnet to improve door sealing and reduce temperature loss
• Helps stop frequent compressor cycles caused by a poor seal
• Can reduce frost buildup and prevent food spoilage related to a leaking seal
• Works with the door gasket to maintain proper closing force

• Disconnect power to the appliance before starting any repair
• Clean the magnet channel and surrounding area so the magnet seats properly
• Press or slide the magnet into place; some applications use clips or adhesive—verify fit before final installation

Washer won't power on or turn on? A faulty power cord with frayed wires or damaged plug may be the cause. Direct electrical connection replacement.

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.

This mounting support bracket secures appliance components to the cabinet, helping keep parts aligned and stable for reliable operation. Replaces a worn or broken bracket to reduce movement, rattling, or misalignment. What it does:

• Provides a sturdy mounting point for internal panels or assemblies
• Helps prevent vibration and noise caused by loose components
• Restores proper alignment for doors, panels, or attached parts
• Reduces wear on connected parts by keeping them securely positioned

• Verify the correct bracket location and orientation before fastening
• Use manufacturer-recommended screws and torque; do not overtighten
• Disconnect power and follow basic electrical safety when working near wiring

Adjustable leveling leg for washers. Securely holds machine in place while allowing height adjustment on uneven floors. Replace if stripped or seized.

Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.

Replacement mounting screw for washers and laundry centers. Secures internal components and panels. Order a new screw if original is lost or stripped.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

Replacement mounting screw for dryers. Secures panels, brackets, and internal components. Order if your original screw is stripped, missing, or damaged.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

Replacement mounting screw that secures panels, brackets or small components in compatible appliances. Installs quickly to replace stripped or missing fasteners and help stop rattling and restore proper alignment. What it does:

• Fastens panels, trim pieces, brackets and other small assemblies to the appliance.
• Replaces stripped, corroded or broken screws that can cause loose parts or vibration noise.
• Helps restore proper alignment of doors, drawers or trim when a missing screw allows movement.
• Small appliance fastener sized for original mounting points—use the OEM screw whenever possible.

• Disconnect power and water before starting any repair.
• Start the screw by hand to avoid cross-threading; use the correct screwdriver or bit.
• Tighten snugly but avoid overtightening to prevent stripped threads or damaged plastic.

Replacement mounting screw that secures panels, brackets, and trim pieces on your washer. Needed when original fasteners are missing, stripped, or damaged.

Replacement mounting screw for dryers. Secures panels, brackets, and internal components. Replace if stripped, missing, or corroded during repairs.

Replacement mounting screw for dryers. Secures panels and internal components. Needed when original screw is stripped, damaged, missing, or causing loose parts.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

Sound dampening insulation that reduces vibration and noise in your washer. Replace if worn, torn, or missing to restore quiet operation and protect components.

This replacement screw secures panels, trim, and small appliance components to restore proper fit and reduce rattling. Use it when a factory screw is missing, stripped, or damaged to keep parts aligned and stable. What it does:

• Fastens trim, control panels, or small interior/exterior parts
• Prevents rattling or vibration caused by loose or missing screws
• Restores proper alignment of panels and housings
• Replaces stripped, damaged, or lost mounting hardware

• Disconnect power before servicing electrical appliances
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage

Mounting screw for washer cabinet and component assembly. Replace if screw is stripped, missing, or damaged during disassembly. Essential hardware piece.

Plastic hole plug for washer cabinet or panel. Covers unused mounting holes or ports. Replace if cracked, missing, or broken to maintain a finished look.

Wire harness for front-load washers. Connects electrical components to the control board. Replace if wires are frayed, connectors damaged, or broken.

Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

Size: 6-20 x 0.312 inch.

Size: 3/4 inch od x 1/4 inch id.