Parts for Ge PSG27SIMAFBS: 08 - Fresh Food Shelves Parts

This in-line water filtration system reduces water contaminants and improves taste of drinking water and ice. Reduces the taste and odor of chlorine through high quality carbon block media without removing minerals beneficial to your health. The filter should be replaced every six months or 300 galleons for best performance. The Quick Connect feature makes filter replacement fast and easy. Flow rate: 0.5 gpm/1.9 lpm. 1/4" quick connect fittings on both ends.

The Pan Cover Wheel is an OEM part for GE refrigerators. It supports the movement of the fresh food section, allowing it to slide smoothly when accessing the refrigerator’s drawers.

Over time, the pan cover wheel can wear out or become damaged due to regular use, exposure to the weight of food items, or accidental impacts. If the wheel is faulty, it can hinder the smooth operation of the pan cover.

Symptoms of a bad pan cover wheel include:

• Difficulty sliding the pan cover in and out
• The pan cover not aligning properly or becoming stuck
• Unusual noises such as grinding or squeaking during movement
• Visible cracks or damage to the wheel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw is an OEM part for GE refrigerators. It serves a crucial function in securing and allowing smooth operation of the refrigerator's drawer rollers.

Causes of a bad or missing screw can include accidental loss during repair or maintenance, stripping of the screw threads due to overtightening, or general wear and tear over time.

Symptoms of a loose or screw include:

• Loose or wobbly refrigerator drawer
• Difficulty opening or closing the drawer smoothly
• Scraping or grinding noises when operating the drawer
• Drawer coming off the track or rollers entirely

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Glass Pan Cover is an OEM part for GE refrigerators. It serves as a cover for the crisper drawers, providing a flat surface for additional storage while keeping the contents of the drawers fresh. This glass cover helps maintain optimal humidity levels within the crisper, ensuring that fruits and vegetables stay fresh longer.

Causes of a bad glass pan cover can include cracks or chips from accidental drops, regular wear and tear, or excessive weight being placed on it. Damage to the cover can compromise its effectiveness and safety.

Symptoms of a bad glass pan cover include:

• Visible cracks or chips in the glass
• The cover not fitting properly or becoming unstable
• Difficulty in maintaining the crisper's humidity levels
• Risk of shattered glass within the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fruit and Vegetable Pan Shelf is an OEM part for GE refrigerators. Designed to provide sturdy support and optimal storage for fruit and vegetable pans, this shelf is an essential component for organizing and accessing your produce with ease. It fits snugly above the fruit and vegetable drawers, maximizing space utilization within the fridge and helping maintain the freshness of fruits and vegetables by ensuring proper air circulation around them.

A damaged or missing fruit and vegetable pan shelf can lead to disorganization and inefficient use of space in your refrigerator. 

Symptoms of a bad Fruit and Vegetable Pan Shelf include:

• Sagging or inability to support weight, leading to instability of stored items
• Difficulty fitting or securing the shelf in the designated slots
• Visible cracks or damage that compromise the shelf's integrity

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Humidity Control is an OEM part for GE refrigerators. This component regulates the humidity levels within the crisper drawers, ensuring optimal conditions for preserving the freshness and longevity of fruits and vegetables. By controlling the humidity, it helps to prevent produce from drying out or becoming too moist.

Causes of a bad humidity control can include mechanical failure, damage from spills or impacts, and wear and tear over time. Additionally, issues with the connecting cables or electronic controls can also lead to malfunction.

Symptoms of a bad humidity control include:

• Produce spoiling faster than usual
• Visible condensation or dryness in the crisper drawers
• Difficulty adjusting the humidity settings
• The humidity control lever or switch not functioning properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pan Cover Gasket is an OEM part for GE refrigerators. This gasket provides a tight seal between the pan cover and the refrigerator compartment, helping to maintain proper humidity levels and temperature for the stored food. It is essential for preserving the freshness of fruits, vegetables, and other perishable items.

Causes of a bad pan cover gasket can include regular wear and tear, exposure to food spills, and improper cleaning methods. When the gasket becomes damaged or worn out, it can lead to air leaks, causing the refrigerator to work harder to maintain the correct temperature.

Symptoms of a bad pan cover gasket include:

• Moisture buildup inside the refrigerator
• Reduced freshness of stored produce
• The gasket showing visible signs of wear or damage
• The refrigerator running more frequently

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rear gasket fits the refrigerator's crisper cover, sealing the back edge of the glass/frame. It helps maintain proper airflow and humidity in the crisper area while cushioning the glass and reducing rattles and gaps.

• Creates a seal along the rear edge of the crisper cover to limit air leaks
• Helps maintain consistent humidity and airflow in the crisper compartment
• Cushions and supports the glass to minimize vibration and noise
• Replace if torn, flattened, missing, or if you see gaps or glass rattle

• Unplug the refrigerator before servicing
• Remove crisper drawers and carefully lift off the glass cover/frame
• Pull the old gasket from the rear channel and clean the mating surfaces
• Press the new gasket fully into the rear channel; reinstall cover and drawers, checking for an even seal

The Humidity Control Slide is an OEM replacement part for GE refrigerators. This slide is responsible for adjusting settings inside the refrigerator such as the crisper humidity levels. Proper functioning of the humidity control slide allows for optimization of storage conditions based on the specific items stored.

Causes of a bad humidity control slide can include normal wear and tear over time, as well as issues like damage or obstruction that prevent the smooth operation of the slide mechanism.

Symptoms of a bad humidity control slide include:

• Inability to adjust crisper humidity levels
• Setting gets stuck on maximum or minimum humidity
• Storage results remain consistently too dry or too moist regardless of the setting

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drawer Cover is an OEM replacement part for select GE refrigerator vegetable and deli drawers. It protects stored contents from dehydration, contaminants and prolonged illumination while keeping the drawers light-sealed. Proper drawer insulation optimizes food storage conditions.

Causes of a bad drawer cover can include cracks and breaks from repeated drawer opening/closing stresses over time. Exposure to produce acids and moisture accelerates degradation of plastic sealing surfaces.

Symptoms include:

• Diminished freshness of stored items due to lack of darkness
• Elevated temperatures or dryness
• Mildew growth may occur without breathable covers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

This rear gasket cover secures the refrigerator door gasket and helps maintain a clean seal at the back edge of the door. It restores proper gasket alignment and helps reduce air leaks and moisture buildup. What it does:

• Holds the rear edge of the door gasket in place for a consistent seal.
• Helps prevent cold air loss and condensation by keeping the gasket aligned.
• Reduces rubbing and wear on the gasket edge caused by movement.
• Commonly replaced when the cover is cracked, missing, or allows the gasket to pull loose.

• One rear gasket cover.

• Remove power to the appliance before beginning any work.
• Typically installs by snapping or sliding into the door gasket channel; inspect surrounding trim for damage.
• Use basic hand tools; avoid forcing the cover to prevent breaking the part or the door.
• If gasket damage is present, replace the gasket as needed to ensure a proper seal.

The Drawer Cover is an OEM replacement part for select GE refrigerator vegetable and deli drawers. It protects stored contents from dehydration, contaminants and prolonged illumination while keeping the drawers light-sealed. Proper drawer insulation optimizes food storage conditions.

Causes of a bad drawer cover can include cracks and breaks from repeated drawer opening/closing stresses over time. Exposure to produce acids and moisture accelerates degradation of plastic sealing surfaces.

Symptoms include:

• Diminished freshness of stored items due to lack of darkness
• Elevated temperatures or dryness
• Mildew growth may occur without breathable covers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.

The Meat Pan Glass Cover is an OEM replacement part for GE refrigerators. Made of transparent tempered glass, the cover allows contents underneath to be viewed while still maintaining humidity levels. 

Causes can be accidental impacts if doors are slammed shut carelessly. Thermal stresses from daily temperature changes may also weaken adhesion over many years.

Symptoms of a problematic glass cover include:

• Chips or cracks that compromise the seal
• Difficulty clicking fully into place
• Coming loose during opening/closing

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

This shelf slideout assembly replaces a worn or broken slide mechanism so a refrigerator shelf glides smoothly in and out for easier access and safer storage. Fits the factory shelf track to restore normal shelf movement. What it does:

• Replaces the slide mechanism that guides a refrigerator shelf in and out
• Restores smooth, aligned shelf movement and helps prevent shelves from sticking or falling
• Reduces shelf wobble and uneven travel that can make loading difficult
• Commonly used when the existing slide is cracked, bent, or no longer secures the shelf

• One shelf slideout assembly

• High-level replacement: remove shelf, lift out the old slide assembly, and snap or screw the new slide into the same mounting points
• Keep shelves and contents clear before starting to avoid damage or injury
• If screws or clips appear stripped or missing, replace them with OEM equivalents for secure fit
• Disconnect power only if required by your model's service instructions; follow the refrigerator manufacturer's safety guidance

The Shelf Stop is an OEM replacement part for GE refrigerators. The shelf stop in your refrigerator is what locks the shelf into the refrigerator liner.The shelf stop features a small protruding nub that fits into pre-cut slots in shelf supports, preventing shelves from being inserted too far. 

Causes of a bad shelf stop can include wear over many years of shelf adjustment, or damage from impact with shelves.

Symptoms of a bad shelf stop include:

• Shelves no longer fitting tightly or sitting flush in walls
• Ability to insert shelves further than intended design position
• Shelves shifting positions or becoming loose during use

This is a genuine OEM part that works for some models of GE, and Hotpoint models.