Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.
This throttle linkage spring is typically attached to the throttle cable, although it may be attached to the carburetor or the throttle body on select models. This spring will close the throttle valve, which helps reduce the fuel flow to the engine and helps to slow it down. The spring can become stretched or snap over time with regular use. A faulty throttle spring could be identified by the throttle sticking or lacking any control at all. This simple repair will require needle nose pliers, sockets, a screwdriver, and a wrench. Be sure to use gloves to perform all repairs and use caution when replacing the throttle spring to prevent damage to the new part. This OEM throttle spring is designed for use with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines in lawn care equipment. It is compatible with more than 150 models and a number of brands, including Troy-Bilt, Husky, Yard-Man, MTD, Yard Machines, and Cub Cadet.
The governor rod is a genuine replacement part found on select models of snowblowers. This rod is responsible for connecting the throttle cable and throttle body, helping to open and close the throttle to change the speed of the engine. This durable metal rod is exposed to repetitive motion and constant vibrations, which can cause damage or wear over time. If this rod does not function, the throttle will be unable to be controlled and that can affect the use of the equipment. Replacing the governor rod with this genuine part will guarantee an exact fit for compatible units. This genuine governor rod is manufactured to specific OEM standards and can be used in compatible machines from Cub Cadet, MTD, Yard Man, Craftsman, Troy-Bilt, Yard Machines, and HUSKEE. The part can be found in snowblowers, with hundreds of possible models that can take this governor's rod. It is made of durable metal and sold as an individual unit. No additional components or hardware are included, and any additional parts will require a separate purchase. Always wear gloves and perform engine repairs only when the machine has had time to cool. Be sure to disengage the engine before doing any work for safety, as well.
The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.
This replacement part is a roll over valve. This is a genuine replacement part made by MTD. This part is found in many machines and is primarily a safety device that ensures that the fuel tank does not leak in the event of a vehicle roll-over. A new roll over valve might be needed if the current one is missing or damaged in any way. If the fuel tank is leaking when on it's side or upside down, it might be due to this part not working properly. If this is the case, be sure to replace it as soon as possible. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This replacement part is a dipstick assembly. This is a genuine replacement part made by MTD. This part is commonly used in machines that are run by fuel. This part is able to measure the quantity of liquid in a space that is inaccessible due to the size of the opening. Dipsticks are able to provide the user with an accurate measure of the level of fuel in a tank. A new dipstick assembly might be needed if the user is unable to currently check the amount of fuel within a tank. If the dipstick has been misplaced or is damaged, it is possible that it needs to be replaced. Work gloves are recommended when replacing this part as it's likely that fuel can still be stuck to the previous part. This dipstick assembly is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.
Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.
This is a genuine OEM replacement tether sourced directly from the manufacturer. It is used on many different fuel tanks on lawn and garden equipment. The tether attaches to the fuel cap and is part of the fuel cap originally. The fuel cap is vented to prevent heat from causing fuel tank expansion and possible explosion. The tether is designed to help hold the fuel cap in place during use. Everyday use may cause the tether to fall off. Without the tether, vibration from use or running into brush and trees can cause the fuel cap to come off. The cap is red to help it stand out on the engine. It has the image of a gas pump to show that it is where the fuel goes.If the tether breaks off and falls into the gas tank, use needle-nose pliers to fish it out. If that does not work, remove the fuel tank and empty the contents into a dish. The tether will fall out. The new gas cap and tether can be screwed in without tools.This tether is a plastic part that is individually sold. It is compatible with many fuel tanks manufactured by MTD, Yard Machines, Cub Cadet, and Troy-Bilt.
This is an OEM primer hose assembly replacement sourced directly from the manufacturer. It is used on various outdoor lawn and garden small engines. The primer hose is inserted into the fuel tank. This hose then connects to a bulb that forces the fuel to the carburetor to start the engine. Excess fuel is forced back into the fuel line. Normal wear and tear can cause the line and primer bulb to become brittle and crack, making it unable to move fuel into the carburetor.A Phillips screwdriver, long-nosed pliers, standard screwdriver, and a pan to drain the fuel are necessary to remove and replace the primer hose assembly. This project can be complete in less than half an hour. Drain the fuel from the fuel tank and fuel lines before starting the project. Remove the rear cover and take the carburetor and fuel lines off the engine. Install the primer hose and primer bulb. Reinstall the parts and fill the fuel tank. Pump the primer bulb to make sure it is installed correctly.This primer hose assembly is made of plastic and rubber and is sold as an individual kit. It is compatible with tillers and other small engines manufactured by MTD, Cub Cadet, and Yard Machines.
The fuel tank plays one of the most important roles in an engine. It is the reservoir that contains the fuel needed to operate the machine. If there is a problem with the tank, or if it is damaged in any way, it could result in a leak. This is a significant safety risk in addition to being a waste of fuel. Owners will not want to operate a machine that has a fuel tank problem, as it could result in a fire.Fuel tanks are meant to be robust, but they can become damaged. Accidents could cause a puncture in the tank. They could be damaged due to age and corrosion, as well. If there are any issues with the fuel tank, it should be replaced as soon as possible. A machine with a damaged or broken fuel tank should not be used.This fuel tank is used for many small engine models, such as those found in lawn and garden equipment. Compatible brands include MTD, Yard Machines, Craftsman, Columbia, Cub Cadet, and Troy-Bilt. Each fuel tank is sold individually and is a genuine OEM replacement part from the manufacturer.