Parts for Husqvarna 968999512: 42" Cutting Deck Parts

This replacement part is an idler spindle, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is commonly found in lawn mowers and assists the user in turning the machine in different directions. The idler spindle allows for smooth turns and maneuvers during use. A new idler spindle might be needed if the current ones are damaged or broken in any way. It is possible for this part to become worn down or stripped overtime due to normal wear and tear. If the user noticed that the machine is not turning as smoothly or is unable to rotate the steering of the appliance, it might be time to replace the idler spindle. This replacement part is an OEM part sourced directly from the manufacturer. This idler spindle is sold individually. Be sure to purchase the correct amount as some appliances require more than one.

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This shoulder bolt is an authentic OEM replacement part sourced directly from the manufacturer. It is used on many lawn and garden machines to connect parts that rotate or move. The bolt is threaded partway up the shaft, and then the shoulder is smooth. This smooth area allows for rotation. Shoulder bolts can be found on pulleys, gears, rolling wheels, and moving parts of the engine. The bolt's size indicates the shoulder's length, measured from the end of the shoulder to underneath the head. This shoulder bolt has a hexagonal head that requires a hex wrench to remove and replace. The bolt may rust or corrode due to normal wear and tear and exposure to the weather. Constant pressure due to moving parts may also cause the bolt to be worn down. During routine inspections, if the bolt is found to be worn, it should be removed and a new one installed. This shoulder bolt is a heavy-duty gold-colored part that is sold individually. This shoulder bolt is designed for use on all outdoor lawn and garden machines that require a 1/2C x 2/ ¾ inch shoulder bolt.

This spring is a genuine Husqvarna part, sold individually. This spring can be used as a replacement part in a lawn mower. The purpose of the spring in a lawn mower is to secure one or more components while allowing those components to have a range of motion within the internal mechanisms of the appliance.If the spring is permanently damaged, it should be removed and replaced by this genuine OEM replacement part. This replacement is a simple process that will require only basic tools to execute.This is a genuine OEM from the manufacturer. It is sold individually. This spring is compatible with the following outdoor appliance brands: Husqvarna.

This washer is a genuine Husqvarna part, sold individually. This washer can be used as a replacement part in a lawn mower. The purpose of the washer in a lawn mower is to serve as a small fastening component that can reduce the friction between two or more components.The washer in a lawn mower can be easily lost or misplaced during the operation of the appliance as it is a particularly small component that can go missing without alerting the operator of its absence. If this occurs, the washer should be replaced by this genuine OEM replacement part. Additionally, the washer can be subject to stripping over time, in which case it should also be immediately replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This washer is compatible with the following outdoor appliance brands: Husqvarna and Dixon.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This is a push nut that is used in many different models of lawnmowers. It's a black nut made of durable metal. The push nut is used to secure various components in several locations on lawn and garden equipment. This component is made of strong materials but it can experience damage, wear and tear, or even break over time. This can cause the lawnmower to perform poorly or experience other issues. This is a small component that can be broken or lost and needs to be replaced to ensure the best performance from the lawnmower. A set of pliers and a screwdriver may be required to replace the push nut. The parts that will need to be removed before replacement vary based on the location of the push nut. Disassemble any components in the way before taking out the bad or damaged push nut. Place and tighten the new nut and reassemble the parts.This is a genuine OEM replacement push nut that is directly sourced from the manufacturer. It is sold as an individual component. The push nut is created for use with lawnmowers manufactured by Craftsman, Husqvarna, Weed Eater, Poulan, Murray, Ariens, and Dixon.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This is a shoulder bolt, which is similar in appearance to a screw, but without any threading. It features a shoulder that enables it to rotate, or for parts attached with it to rotate. It is commonly found in gears, pulleys, and moving parts inside many mechanical assemblies, as well as engines. It is also used in many wheel assemblies. It is a good idea to always have at least one spare shoulder bolt on hand as they do wear frequently and will require replacement at least once during the lifespan of a lawnmower. Sometimes known as stripper bolts, the head on these genuine replacement parts have the largest diameter on the part and a screw-like assembly at the bottom. Installation will require a screwdriver. This OEM part works in Husqvarna, Craftsman, Poulan, and Ariens equipment. It is just under 3 in length and roughly 1.2 in diameter. It is designed for a wide array of lawnmower models from the manufacturers mentioned and will secure a gauge wheel to the bracket. This part is sold individually as a replacement part.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

The mandrel pulley or spindle pulley is a metal part that spins the blades of a riding mower as it is turned with a belt. Though quite durable, on occasion, something happens to dent or warp the pulley housing, interfering with the turning of the blades and creating a dangerous situation. Once you have found a stationary place for the mower and made certain it cannot be started, drop the mower housing by removing the locking pins and arms. Next, you’ll want to disconnect the spring from the clutch rod. This will allow you to roll the mowing belt off the engine pulley. Remove the deck from beneath the tractor. Using a lubricant, remove the flange nut from the pulley assembly. Next, take the top flange nut off the pulley with a socket wrench. Penetrating oil may be required. Take the pulley from the spindle. Reassembling the unit is a matter of walking back through the disassembly process. This spindle pulley is an OEM replacement manufactured by Husqvarna. In addition, it is compatible with many Craftsmen mowers as well. This OEM part is individually packaged and sold.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This flat washer is a genuine Husqvarna part, sold individually. This flat washer can be used as a replacement part in a lawn mower. The purpose of the flat washer in a lawn mower is to function within the fastening mechanisms of an appliance by fitting onto a bolt or a screw so that the spacing between one or more components is maintained while also reducing friction between those components.The washer can be easily lost or misplaced during the operation of the appliance as it is a small component that does not serve a critical function. The flat washer can also be punctured, dented, warped, or eroded over time, in which case it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: Husqvarna.

This part is a replacement hex nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or misplaced hex nut in lawn tractors.This hex nut is a standard piece of hardware and thus has multiple different uses. The nut gets its name from its hexagonal shape. It can be used to properly secure or fasten various components in the equipment. This part is subject to wear and tear or corrosion, and can also be easily lost, thus requiring replacement. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex nut, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this hex nut is suitable for use on several models of lawn tractors and other outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower.The screw in a lawn mower might eventually have to be replaced if it is lost, misplaced, or stripped away from general wear and tear with long-term use. The screw is a small component that can be lost or misplaced; if this occurs, the screw should be replaced by this genuine OEM replacement part. The screw can also be damaged over time, and if its damage results in the loosening of the components to which it was affixed, the screw should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.