Mike D. for Model Number Bosch SHU5315UC/U11 Hello, I just installed this assembly and ran a load with the front door cover off so I could assure that there were no water leaks. All around the assembly where the rubber casket is fine. No leaks. However I noticed that on the right side of the assembly, looking at it from the outside of the dishwasher, there appears to be a cover missing (2”x5/8” hole) or incomplete assembly. On the original the plastic on this side is fully molded with no hole. It is fully enclosed and no water can come through. With the new assemble water will make its way through to the interior of the door via slots on the inside facing side of the assembly. I also notice that when the soap dispenser opened; the path for the water to enter the interior of the dishwasher door was lessened. This was due to the soap door covering the slots that give the water a path to the interior of the dishwasher door. If you go to your website (http://www.appliancepartspros.com/part_details.aspx?part_id=2802340) and click on the middle view it is the left side I’m referring to. If you click on the far right view you can see the slots that I’m referring to that allow the water to have a path to the interior of the dishwasher door because the compartment that the slots access is not fully enclosed due this 2”x5/8 hole. Thanks in advance for your help
Answer Hi Mike! You can try part number 00488964. While the manufacturer has 00263088 as the correct one for the model number you've provided. Where did you locate the model number? You have 45 days to request a refund when you buy your parts from us. Hope this helps! Read More... Answered by AppliancePartsPros.com | Wednesday, April 20, 2011