Customer Questions and Answers for Dishwasher Main Control Board Assembly by Ge

RC, You'll want to check and make sure you have enough water in the tub. Start the dishwasher, let it run 3 to 5 minutes, then unlatch the door, remove the lower rack. The water level in the front of the tub in the area of the float should be 1/2 to 3/4 inch deep, if not, there's not enough water to properly pressurize the pump and circulate the water. If the water level is in range, you'll need to remove the wash pump assembly WD26X10053 and check for a damaged impeller WD19X10038.