Customer Questions and Answers for Dishwasher Control Panel by Whirlpool

Hello Bill. 1. Remove the six (6) screws securing the control panel to the door frame. 2. The control panel will now drop down and be free of the door assembly. The wiring harness
will remain connected to the console components. 1. Disconnect the ribbon connector and the wiring harness connectors from the electronic control
board.
2. Use a flat bladed screwdriver to depress the
holding tabs at the left end of the control board
assembly while pulling up.
SPLIT CONTROL MODELS
3. Once the Electronic Control Board is removed,
a ribbon cable interconnect board
is exposed. 4. Unsnap the interconnect board from the
control panel assembly W10775980.
5. Disconnect the three ribbon cables from
the interconnect board. Hope this helps.