Nolan for Model Number wfw8300sw0 Washer goes through cycles fine except for the tub. Belt is good, all connections are good, no power to motor. Would that be the MCU or the CCU that needs replacing?
Answer Hello Nolan. See if there is power coming to the MCU. If so, and no power comes out, you will need to replace the MCU WPW10197864. If there is no power to the MCU, and the wiring harness is good, then you will need to replace the CCU WPW10525351. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, October 18, 2011