Brian for Model Number du1100xtps3 My start light continuously flashes and cannot be reset. When I turn off the breaker and try again, the same thing happens. Do I need this panel or the control board?
Answer Brian, I would not start with the control board, you most likely have an issue in the keypad/control panel assembly WP3385734 . " PROBLEM: WON’T RUN AND LED ABOVE KEY(S) IS FLASHING RAPIDLY = Stuck key(s) or shorted circuit(s) in keypad. Shorted circuits or connections on the control that read the keys. " When the repair is complete you will need to reset the control board " NOTE 1. To start the Service Diagnostics Cycle, press the following keys, in order, in less than 6 seconds, while in standby: Heated Dry, Normal, Heated Dry, Normal", ans allow the test mode to advance to the end of the mode, and turn off. Thanks and Good Luck Read More... Answered by AppliancePartsPros.com | Thursday, October 27, 2011