David for Model Number MFC2062DEM00 Maytag Refrigerator MFC2062DEM00; Ice Maker part # 10469286 not working (compatible with Whirlpool AP6030643). The ice maker was working fine until I left the freezer door ajar overnight; then shut it. Melted water collected in the freezer bottom then froze after the freezer got cold again. Freezer still works but - No ice. YouTube says to test the ice machine cycle by jumping port T (thermostat) to H (Heater) with freezer light off. The cycle did not start. I tested port L (Line) to N (Neutral) for AC current. There was none. There is no ice in the water supply hose for at least 7 inches. Why would the ice machine break under the described conditions? Since the cycle did not start and there is no AC detected, is it safe to assume the ice machine is broken and there is no other obvious reason for no ice (solenoid perhaps?)? Thanks for your assistance
Answer David, it would be recommended that the wires going from the ice maker to the wall are tested for 120VAC from the black wire to the white wire on the end close to the wall. If there is voltage there when the door switch is pressed in, the failure is in the ice maker harness WPW10458985. If there is not voltage, the failure would likely be from the freezer door switch W11396033 failing or having a loose wire. Read More... Answered by AppliancePartsPros.com | Wednesday, May 12, 2021