Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Spark Module by Whirlpool

4.89 (64)
By: Whirlpool
Part Number: OEM18059193
Manufacturer Part Number: WPW10331686

The Spark Module is an OEM replacement part for Whirlpool ranges. It is an electrical component that generates the spark needed to ignite the gas burners. By sparking consistently and reliably, the module allows the cooktop burners to ignite with each use. 

Causes of a bad spark module can include normal wear and tear over time, exposure to moisture or residue, or issues with the electronic components that produce the spark.

Symptoms of a bad spark module include:

  • Burners that will not ignite or light consistently  
  • Burners that ignite but then immediately go out
  • Only some of the burners lighting while others do not
  • A clicking sound coming from the ignitors but no visible spark

Note: For harness from spark module to igniters use part number 9756892.

This OEM Whirlpool replacement spark module is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

More
$226.54

IN STOCK
Ships Today Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Spark Module (Part Number: OEM18059193)

View all Questions

Dave P. for Model Number Whirlpool Accubake Gas Range Model:GS440LEMB1

The oven seems to start correctly on pre-heat. You hear the ignitor clicking and then hear the gas ignite. However during cooking the oven will just stop heating. The control panel still says the oven is "on", but the oven will not attempt to re-light. The problem is intermitent. Sometime the oven runs just fine, other times it will shut down in 10 minutes or 20 minutes or even randomly. If you stop the original baking cycle and retry starting the oven it will usually get through the pre-heat. Twice tonight it just shut off randomly. Makes cooking dinner pretty tough. Any suggestions on the cause? I was wondering if the control panel is faulty. Thanks.

Answer

Hello Dave. It sounds like you may have a grounding issue and will need to replace the burner assembly 8190618. When the unit does this, you will need to see if you hear clicking, but the igniter does not spark correctly to lite the gas. If so, you will need to replace the burner assembly. If the unit never clicks, you may have a bad control WP8524252 or spark module WPW10331686. You will need to see if the control is sending power to the module for the spark. If so, and the spark module does not spark the igniter, the module is bad. If there is no power, the control is bad. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Read More...

Answered by AppliancePartsPros.com   |   Wednesday, June 22, 2011

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google