Ariens Lawn Mower Parts

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This is a replacement tie rod that is manufactured for use on select lawn tractors. It serves as an identical replacement for the tie rod that came installed on the unit originally. The tie rod is an important part of the axle operation that helps to keep the mower wheels in alignment. These parts undergo constant repetitive motion, and tie rods are known to wear and even snap with regular use. If the tie rod is broken, the wheels will be unable to turn and the mower will be rendered useless until the part is replaced. This genuine OEM part will offer an exact fit for compatible models. This OEM tie rod is manufactured by Husqvarna and is designed for use with machines from Poulan, Ryobi, Weed Eater, Jonsered, and Husqvarna. There are over 150 tractors that can use this part. A screwdriver will be required for replacement of the tie rod. It is sold as an individual part and made of durable metal. Hardware and other axle components are not included. It is important to secure the wheels and disengage the engine when performing work on the tires or axles to ensure safety.

This sector gear plate is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. A sector gear plate is affixed to the steer plate with a bolt and a washer, and its function is to assist in the turning of the wheels from left to right.A sector gear plate might have to be replaced in the event that it suffers damage over time, a common occurrence after long-term usage. The most prevalent form of damage to a sector gear plate is breaking or chipping away at its teeth, which prevents the sector gear plate from turning the wheels in a tight and controlled manner. If several teeth break off of the sector gear plate, a replacement sector gear plate part should be ordered and installed immediately to mitigate any possible further damage to the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This sector gear plate is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This part is a replacement lift assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective lift assembly in lawn tractors and lawnmowers.The lift assembly enables the user to efficiently adjust the height of the mower deck, thus selecting the length they wish to cut the grass. The lift assembly connects to the front of the mower deck. If this part breaks off or becomes dented or otherwise damaged, the deck will not be adjustable and thus the lift assembly will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this lift assembly, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this lift assembly is suitable for use on several different models of lawn tractors and lawnmowers manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This steering boot is a genuine Husqvarna part, sold individually. This steering boot can be used as a replacement part in a lawn mower. The purpose of a steering boot in a lawn mower is to seal off the area outside of the rack and pinion so that debris cannot pass through into the machinery.The steering boot in a lawn mower might need to be replaced if the component can no longer serve its function. This could occur if the seal is broken as a result of general wear and tear from long-term use or from an accident that punctures, scrapes, erodes, or warps the part beyond basic functionality. If this occurs, the steering boot should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple repair process that will require only basic tools to conduct properly.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This steering boot is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, and Ariens.