Parts for Echo CS-400: Auto-Oiler Parts

The auto oiler assembly is a strong metal component used in a variety of chainsaws. It fits onto the worm gear and tube and offers a way to bring oil to the bar of the chainsaw. If the auto oiler assembly is broken or damaged, it may result in having no oil on the bar. This can create problems when using the chainsaw since there is no lubrication present. When this part isn't working correctly, it cannot properly ensure that the chain will make smooth cuts through wood. If the auto oiler assembly is damaged or broken, it should be replaced. Remember to remove the spark plug before starting the replacement process. A wrench set, screwdriver, and socket set will be needed to gain access to the auto oiler assembly. The clutch will need to be removed from the motor shaft and the clutch drum taken off the clutch to reach the oil pump. Replace the assembly and reassemble the other parts.This auto oiler assembly is a genuine OEM replacement part directly sourced from the manufacturer. It is sold as an individual component. This part is designed for use with chainsaws manufactured by Echo and Shindaiwa.

This fuel line clip is used in hundreds of different models of outdoor power equipment to clip fuel lines or other tubes and hoses into place. It is made of a durable metal and comes in a silver color. If the clip starts to become worn or damaged, it will have issues supporting the fuel line, which can lead to leaks or the smell of gasoline. Sometimes the fuel line clip will wear out over time and will need to be replaced. A screwdriver, a pair of pliers, and a wrench will be needed to complete the replacement. Place the tool on a flat surface and remove the fuel cap before draining the fuel. Remove the fuel filter and take off the clip before reinstalling a new one. The fuel filter can then be reinstalled and the rest of the components reassembled.This fuel line clip is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold individually. The clip is compatible with string trimmers, leaf blowers, edgers, hedge trimmers, pole pruners, and chainsaws made by Shindaiwa and Echo.

This genuine OEM replacement fuel cap screws onto the top of a fuel tank to prevent debris from falling into the tank while the chainsaw is being used and to keep fuel from leaking from the tank. This item includes the cap itself as well as a stopper to keep the cap from falling away. Although manufacturers add a stopper to most fuel cap lids, it is still possible to remove a fuel cap, set it down, lose it, or step on it and break it. If this happens, do not attempt to use the appliance until the fuel cap can be replaced. Operating an appliance without a fuel cap could result in a fire hazard and puts the engine at risk of contamination. Instead, wait to reattach a new cap. This fuel cap is designed for Echo chainsaws, though it may work with some Shindaiwa chainsaws, too. As a top of the line replacement part, this fuel cap comes sourced directly from the original manufacturer. It does not include any additional hardware.