Parts for Electrolux EW30IS80RSA: 02 - Backguard Parts

This ignition generator and wiring harness assembly routes power and provides the spark/ignition signal needed for gas appliance burners to light. It replaces a worn or damaged ignition assembly to restore reliable lighting. What it does:

• Sends ignition voltage to the burner igniters and electrodes so burners light reliably
• Routes and secures wiring between the control module and ignition components
• Common failure symptoms: burners won't light, continuous clicking, or intermittent ignition
• Works as the electrical interface between the control and the igniters for safe startup

• One generator and wiring harness assembly

• Disconnect electrical power and turn off the gas supply before starting work
• Follow the appliance OEM diagram for correct routing and connector locations
• Inspect connectors and electrodes for damage and replace if corroded or worn

A single replacement mounting screw used to secure appliance panels, trim, or small brackets. Restores proper fastening so parts stay aligned and eliminates loose or rattling components. What it does:

• Fastens panels, brackets, or trim pieces to the appliance frame
• Secures components that vibrate or shift during normal use
• Helps stop rattling, misalignment, or gaps caused by a missing or loose screw
• Works as a direct hardware replacement where the OEM screw is required

• One screw

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread damage
• Disconnect power or follow appliance safety procedures before accessing internal components
• Replace all like fasteners for best fit

This is a replacement mounting screw used to secure the appliance power/control board, restoring a solid electrical board connection and preventing vibration or loose contacts. Ideal for repairs where the original screw is missing or damaged. What it does:

• Fastens the power/control board to the appliance chassis to keep connections stable
• Helps prevent board movement that can cause intermittent electrical issues or noise
• Restores proper mounting after service or component replacement

• Turn off and unplug the appliance before starting any repair
• Use appropriate screwdriver and avoid over-tightening to prevent board or thread damage
• Wear eye protection and keep small parts away from children and pets

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

This main electronic control board manages a refrigerator's user interface and system operations, restoring responsive controls and timed routines. Replace a failed board to resolve erratic cycles, unresponsive buttons, or display/control errors. What it does:

• Regulates compressor, defrost, and fan functions by sending control signals to system components
• Interprets user inputs from the control panel and changes operating modes/timers
• Coordinates defrost cycles and temperature control to maintain normal cooling behavior
• Stop refrigerator operation or cause incorrect temperatures when the board fails

• Disconnect power before attempting service to avoid shock or component damage
• Handle the board by its edges and avoid static discharge; use ESD precautions if available
• Verify connector orientations and gently seat wiring harnesses; do not force pins

This electronic control board regulates the refrigerator's functions and user interface, restoring reliable operation when the original board fails. Replacing a faulty board can stop erratic behavior and restore normal temperature and display control. What it does:

• Manages compressor, fan, defrost and other timed cycles to maintain proper cooling
• Processes user inputs and controls the display/LEDs
• Can stop erratic cycling, unresponsive controls, or incorrect temperature behavior
• Helps resume normal operation when the original board is damaged by power surges or component failure

• Disconnect power to the appliance before starting any work
• Handle the board by the edges and avoid static discharge; use an anti-static wrist strap if available
• Confirm connectors match and seat fully; do not force plugs

This electronic oven control board governs bake/broil functions and the front-panel display in your range. Replace it to restore proper heating control and keypad/display operation when the original control has failed. What it does:

• Interprets keypad inputs and oven sensor feedback to switch bake and broil relays
• Regulates oven temperature during preheat and cycling
• Drives the clock, temperature, and status display
• Common symptoms of a bad board: no heat, blank or erratic display, unresponsive buttons, or recurring error codes

• 1 electronic control board assembly

• Disconnect power at the breaker before servicing
• Handle with ESD precautions; avoid touching exposed circuitry
• Note/photograph wire connections; transfer any brackets and the existing overlay if required
• Inspect wiring, oven sensor, elements, and safety cutoffs; correct issues before restoring power and test-baking

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic control board replaces the oven's primary control module to restore timing, display, and bake/broil cycle control. It fixes issues where the range won't start, displays errors, or has unresponsive touch controls. What it does:

• Manages oven temperature settings, timed bake cycles, and user interface commands
• Controls relays and sends signals to heating elements and sensors
• Helps stop incorrect displays, unresponsive buttons, or intermittent operation
• Works with safety interlocks and diagnostics to maintain normal oven functions

• One electronic control board as shown

• Disconnect power at the breaker before accessing the control panel to avoid shock
• Handle the board by edges and avoid touching components to prevent ESD damage
• Confirm connector locations match before installing; secure mounting screws and connectors

This replacement door gasket seals the refrigerator door to help maintain proper temperature and prevent moisture buildup. A worn or torn seal can cause cooling issues and higher energy use. What it does:

• Creates an air-tight seal around the refrigerator door to help maintain internal temperature
• Reduces frost and moisture buildup by preventing warm, humid air from entering
• Helps improve efficiency and consistent cooling when the original gasket is damaged
• Commonly used when the existing seal is torn, stretched, compressed, or leaving gaps

• Inspect cabinet and gasket channel for debris before installing; clean surface for a proper seal
• Align gasket evenly and press into the channel; some models may require gentle stretching or heating per OEM guidance
• Do not use sharp tools that could nick the gasket; replace if the flange or trim is damaged