Parts for Frigidaire FGEF4085PFA: 02 - Backguard Parts

A replacement lower front skirt that restores the appliance's finished appearance and helps keep dust and debris out of the cabinet base. Ideal when the original skirt is cracked, dented, or missing. What it does:

• Replaces a damaged or missing lower front skirt/kick plate for a finished look
• Covers and protects the cabinet base from dirt, debris and accidental contact
• Helps prevent objects from entering the area below the appliance
• Restores proper gap coverage and cosmetic alignment at the appliance front

• Disconnect power to the appliance before starting any repair
• Remove the old skirt by taking out visible screws or clips; keep any mounting hardware for reuse if undamaged
• Align the new skirt and secure with the original screws/clips; avoid overtightening to prevent cracking
• If mounting hardware is missing or damaged, replace hardware with matching fasteners from the manufacturer

This round control knob replaces a worn, cracked or missing appliance control interface so you can set heat and cycle positions easily. It provides a simple, tactile grip for reliable manual control of the appliance. What it does:

• Fits onto the control shaft to select settings, temperatures or cook zones
• Restores a secure, easy-to-turn control when the original knob is loose or damaged
• Helps prevent accidental setting changes by providing a firm grip
• Commonly used on ranges, ovens and cooktop control panels

• Turn off power (and gas if applicable) to the appliance before starting any repair.
• Remove the damaged knob by pulling straight off the control shaft; install the replacement by aligning and pushing it onto the shaft.
• If the original used a set screw, retain or reinstall it to secure the knob.
• Inspect the control shaft for damage—replace the underlying control if the shaft is bent or stripped.

A single replacement control knob that restores user control of a range or oven function. Replaces a worn, cracked or missing knob so settings are easy to read and change. What it does

• Fits on the control shaft to select temperature or function settings.
• Provides a tactile grip and clear pointer for accurate adjustments.
• Common fix for knobs that spin freely, are stripped, cracked or missing.
• Restores normal operation without replacing the entire control panel.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Align the knob's splines with the control shaft and push firmly until seated.
• If the knob does not fit, do not force—verify shaft type and part number before proceeding.
• For difficult removals, use a gentle pry with a non-marring tool.

This replacement control knob lets you set and adjust heat or function settings on compatible stoves and ovens, restoring a secure grip and clear indicator for accurate control during cooking. What it does:

• Replaces a worn, cracked, or missing control knob used to turn burners, oven temperature, or function selectors
• Provides a clear pointer for precise setting selection and tactile feedback when adjusting controls
• Fits splined control shafts to restore secure, wobble-free operation
• Commonly used when the original knob is stripped, broken, or difficult to turn

• One control knob

• Disconnect power to the appliance before servicing to avoid injury
• Typically installs by pulling the old knob straight off the control shaft and pressing the new knob onto the splined shaft until fully seated
• If applicable, align the knob pointer with the control indicator; do not force or rotate past stop points

This control knob replaces a worn, cracked, or missing range/stove control knob so you can adjust burner or oven settings safely and accurately. It restores a secure grip and a clear pointer for temperature or power selection. What it does

• Fits onto control shafts to select burner heat levels or oven functions.
• Provides a clear pointer for reliable setting adjustments.
• Replaces knobs that are cracked, stripped, loose, or missing.
• Helps prevent accidental changes by seating firmly on the control shaft.

• One control knob.

• Installation is typically a simple pull-off of the old knob and push-on of the new knob; align the pointer with the control marker.
• Make sure controls are in the OFF position before removing or installing the knob.
• If the knob does not seat securely or slips, inspect the control shaft splines or the underlying switch for damage; replace the switch if required.
• For gas ranges, shut off gas and power to the appliance before servicing.

The Indicator Light Lens is an OEM part for Frigidaire ranges. This component covers and protects the indicator light, which signals when a burner or the oven is on, providing a visual cue for users to ensure safe operation.

Over time, the indicator light lens can become damaged or discolored due to heat exposure, regular cleaning, or accidental impacts. Causes of a bad indicator light lens include cracking, warping, or clouding that obscures the light.

Symptoms of a bad indicator light lens include:

• The indicator light not being clearly visible
• Cracks or breaks in the lens
• Discoloration or cloudiness that diminishes the brightness of the light
• The lens becoming loose or falling off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for controlling the temperature and operation of the warming drawer or zone feature.

Causes of a bad Switch can include electrical malfunctions or short circuits, mechanical wear from repeated use, and exposure to moisture or debris.

Symptoms of a bad Switch include:

• Inability to activate or control the warming drawer or zone
• Erratic temperature fluctuations
• Overheating or failure to heat the warming area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Surface Element Control Switch is an OEM part for Frigidaire electric ranges and cooktops. It is a critical component that controls the operation of the surface heating elements, allowing you to turn them on and off, and select the desired heat settings.

Symptoms of a faulty Surface Element Control Switch include:

• Inability to turn on or control the surface heating elements
• Inconsistent or erratic heat output from the elements
• Elements not cycling on and off properly or staying on continuously
• Heating elements not responding to temperature adjustments

Causes of a bad Surface Element Control Switch can include electrical faults, physical damage, or wear and tear over time due to frequent use and exposure to high temperatures. 

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Small Surface Element Switch is an OEM replacement part for Frigidaire electric ranges. It serves as the control knob and circuitry to safely power one of the smaller cooking elements. 

Symptoms of a bad surface element switch include:

• Inability to ignite or regulate heating for its assigned zone
• Switch knob that feels loose, won't click smoothly, or won't stay set  
• Intermittent or unreliable power to the smaller element coils
• Tripped circuit breakers upon use that don't reset

Causes relate to thousands of rotations wearing micro-switches and wiring terminals within the control assembly. Regular cleaning around knobs can prevent accelerated deterioration from baked-on debris conducting excess heat.

This genuine OEM replacement part is compatible with other brands including Electrolux and Kenmore as well.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.