Parts for Ge DSKP333EC5WW: Backsplash, Cabinet & Front Panel Parts

Replacement dryer power cord that connects your dryer to the wall outlet. Needed when the original cord is damaged, burnt, frayed, or missing.

If your dryer's control panel is exposed or electronics aren't working properly, this control shield assembly protects and secures control components.

White inner door panel for dryers. Replaces cracked, broken, or discolored inner door components. Direct fit for compatible dryer models.

Dryer won't advance through cycles or stops mid-cycle? A failing timer disrupts cycle timing and start/stop control. Moderate difficulty replacement.

If your dryer won't advance through cycles or won't shut off, the timer may be faulty. This control restores proper cycle progression and auto-shutoff.

Dryer won't advance through cycles or stops mid-cycle? A failing timer disrupts cycle timing and start/stop control. Moderate difficulty replacement.

This is a flexible rubber or felt seal that fits around the perimeter of the dryer door opening. It creates an airtight seal between the door and the drum area to keep heated air inside the dryer during operation. Replace this gasket if you feel hot air escaping around the door, notice longer drying times, or if the seal is torn, flattened, or deteriorated.

Dryer won't start or humming when you press start? The door switch signals when the door is closed. Easy 15-minute DIY repair with basic tools.

Outer decorative trim panel for your dryer control area. Replaces cracked, dented, or discolored panels to restore appearance and protect controls.

Seals the gap between drum and bulkhead in your dryer. Replace when worn to eliminate scraping noises, prevent fabric snags, and maintain airflow.

The Door Latch is an OEM part for GE dryers. This part ensures the dryer door stays securely closed during operation, activating the safety switch to allow the dryer to operate. The latch mechanism engages with the door strike to lock the door, preventing it from opening while the dryer is running, which is essential for both safety and proper functioning of the appliance. 

Causes for replacement can include normal wear and tear, accidental damage, or a misalignment that prevents the door from securely latching. 

Symptoms of a bad Door Latch include:

• The dryer door doesn't stay closed during cycles.
• Difficulty in starting the dryer due to the door not activating the safety switch.
• Visible wear or damage to the latch mechanism.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Dryer won't start when you press the button, or stops when released? The push-to-start switch often fails. Easy 20-minute DIY repair with video.

A front bracket that supports and secures the appliance's front panel or control assembly to restore proper alignment and stability. Replaces a worn or damaged bracket to reduce panel movement and rattling. What it does:

• Provides structural support for the front panel or control console so panels stay aligned.
• Secures trim and assemblies to prevent vibration, rattling, or loose panels.
• Restores proper fit and contact points that can affect door or panel operation.
• Helps maintain safe, stable mounting for front-facing components.

• One front bracket.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Confirm correct bracket location and orientation before fastening; use original screws or hardware.
• Do not force parts; if fitment is tight, check for obstructions or bent mounting tabs.

Supports the front drum edge for smooth rotation. Replace when you hear squeaking or scraping sounds. Confirm fit with your dryer model number.

Supports the front rim of your dryer drum for smooth, quiet rotation. Replace when you hear scraping or squealing to restore proper drum support.

Captures lint and debris from dryer exhaust to prevent vent clogs and fire hazards. Replace if damaged, cracked, or no longer sealing properly.

Protective cover for your dryer's lint trap that prevents objects from entering the vent. Replace if cracked or broken. Snaps into place. Confirm fit.

Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.

Protective cover for your dryer's lint trap that prevents objects from entering the vent. Replace if cracked or broken. Snaps into place. Confirm fit.

The Door Strike is an OEM part for GE dryers. This component is crucial for ensuring that the dryer door latches properly when closed. It interacts with the door catch mechanism to secure the door during operation, preventing it from opening unexpectedly, which ensures the dryer operates safely and efficiently.

Symptoms of a failing Door Strike include:

• The dryer door not staying closed during a cycle
• Difficulty in closing the dryer door or getting it to latch properly
• The dryer not starting because the door switch is not engaged
• Visible damage or wear on the door strike

Causes of a bad door strike can include wear and tear from regular use, physical damage from slamming the door or mishandling, and misalignment caused by repeated opening and closing.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: If the door catch is also needed, use part number WE1M1011.

This replacement hinge supports and pivots the appliance door so it opens and closes smoothly and stays aligned. A worn or bent hinge can lead to door sagging, scraping, or poor latching that impacts performance and safety. What it does

• Supports the door and provides the pivot point for opening/closing
• Maintains door alignment to help ensure a proper seal
• Restores smooth, consistent door motion
• Common symptoms: door sags, squeaks, scrapes, or won't latch/stay closed

• 1 hinge

• Disconnect power before servicing; for gas units, also shut off gas supply
• Support the door while removing/installing fasteners to prevent stress on the panel
• Reuse original mounting screws/hardware unless damaged
• After installation, adjust if needed

Dryer timer knob control for selecting drying cycles. Replace if your original knob is cracked, broken, stripped, or missing from the control panel.

Cracked or loose dryer control knob making cycle selection difficult? This knob and clip assembly restores secure turning and reliable cycle control.

Size: 8-32 t. Includes 12 screws.