Parts for Kitchenaid KSM3316PIB0: Base And Pedestal Unit Parts

Field assembly for stand mixers. Installs inside the motor housing. Replace if cracked, damaged, or causing electrical issues in your mixer.

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

Replacement power cord for stand mixers. Installs at the rear base to supply electricity. Order when your original cord is frayed, damaged, or missing.

This pedestal raises your front-load laundry appliance to a more comfortable height and adds a convenient storage drawer for laundry essentials. It restores proper fit and access when the original pedestal is missing or damaged. What it does:

• Provides a stable base to raise the washer or dryer for easier loading and unloading
• Includes a built-in storage drawer to hold detergents, dryer sheets, and small supplies
• Helps correct misalignment or instability caused by a cracked or broken pedestal
• Commonly used when the factory pedestal is cracked, dented, or no longer secures the appliance

• Designed for front-loading laundry appliances; follow OEM instructions for secure mounting
• Lift with help—pedestal and appliance can be heavy; avoid pinched fingers
• Disconnect power before moving appliances and ensure unit is level after installation
• If screws or brackets are missing from your kit, before assuming compatibility

This pedestal raises a front-load laundry appliance for easier loading and provides a storage drawer to keep laundry supplies handy. It improves ergonomics and creates usable under-appliance storage without modifying the washer or dryer. What it does:

• Lifts the appliance to reduce bending and improve loading access
• Provides a built-in storage drawer for detergent, dryer sheets or small accessories
• Stabilizes the appliance and helps keep it off the floor
• Can address awkward reach or back strain when loading/unloading

• Turn off and unplug the appliance and disconnect water supply before installing
• Installation may require two people to lift and align the appliance onto the pedestal
• Follow the appliance and pedestal installation instructions and fasten brackets/bolts per manufacturer guidance

This pedestal is a base accessory that raises a front-load washer or dryer for easier loading and adds a stable platform. It helps reduce bending and can provide under-appliance storage depending on model. What it does:

• Lifts the appliance to a more comfortable height for loading and unloading
• Creates a stable support to help keep the appliance level during operation
• Provides built-in storage space on models that include a drawer
• Helpful when replacing a damaged or missing pedestal that leaves the appliance low or hard to access

• Disconnect power (and water for washers) before starting any work
• Use two people to lift and position the appliance safely onto the pedestal
• Follow the appliance manufacturer's instructions for securing the pedestal and appliance

This pedestal is the appliance base that raises a front-load washer or dryer for easier loading and provides a stable, elevated platform. It helps reduce bending and can add a small storage drawer for supplies. What it does:

• Raises the appliance to improve ergonomics and make loading/unloading easier
• Provides a stable platform to help keep the appliance level
• Often includes a storage drawer for laundry supplies
• Helps reduce strain when reaching into the washer or dryer

• One pedestal/storage base as specified by the OEM part number

• Disconnect power and water before installation
• Empty the appliance and have two people lift/move units to avoid injury
• Follow the OEM installation instructions and use recommended fasteners
• Do not modify the pedestal or appliance

This pedestal raises a front-load laundry appliance and adds a convenient storage drawer for detergents and accessories, reducing bending and improving access. It helps keep laundry essentials nearby while creating a cleaner, elevated look. What it does:

• Elevates the washer or dryer for easier loading and unloading, reducing strain from bending
• Provides a storage drawer to hold detergents, dryer sheets, and small laundry items
• Helps align and support the appliance for stable operation
• Replaces a damaged or missing pedestal causing low appliance height or lost storage

• Disconnect power and water supply and remove laundry before installation
• Requires lifting the appliance onto the pedestal—have a second person or use proper lifting equipment
• Align mounting points and secure per the appliance manufacturer's instructions
• Refer to the appliance manual or parts diagram for correct fastener locations and torque

This pedestal elevates a front-load washer or dryer to make loading and unloading easier and reduce bending. It provides a stable, level platform that positions the appliance at a more comfortable height. What it does:

• Raises the appliance to improve access and ergonomics during loading and unloading
• Creates a stable platform to help maintain proper appliance alignment
• Helps reduce strain from bending over to reach the drum or controls
• Designed to mount under the appliance using the factory attachment points

• One pedestal

• Disconnect power (and water supply for washers) before installing
• Follow the manufacturer's installation instructions and use proper fasteners
• Two-person lift recommended for safe placement and alignment

This pedestal raises a front-load laundry appliance for easier loading and unloading while adding stable support and useful storage under the machine. It restores proper ride height and helps reduce bending during laundry tasks. What it does:

• Raises and supports a front-load washer or dryer for more comfortable access
• Provides a shallow storage area for laundry supplies and small items
• Restores a damaged or cracked pedestal to eliminate wobble or uneven seating
• Helps protect the appliance base from floor-level impacts and debris

• Disconnect power and water and empty the appliance before lifting or moving it.
• Use two people to position the pedestal and appliance; pedestals and appliances are heavy and awkward.
• Follow the manufacturer's installation instructions and hardware requirements for secure mounting.

This pedestal raises and supports a front-load laundry appliance for easier loading and unloading while improving reach and ergonomics. It creates a stable, elevated base so you can load clothes without excessive bending. What it does:

• Elevates a front-load washer or dryer to reduce bending and make loading/unloading easier
• Provides a stable, level base to help keep the appliance steady during use
• Improves accessibility by raising controls and the door opening to a more comfortable height
• Helps protect the appliance from direct floor contact and minor spills

• Disconnect power and water to the appliance before installing
• Follow the manufacturer's installation instructions and use the correct mounting hardware
• Installation may require basic tools and two people to safely position and secure the appliance

This pedestal raises the laundry appliance to a comfortable working height and provides a convenient full-width storage drawer for detergents and accessories. It restores stable support and easy access to supplies under the washer or dryer. What it does:

• Raises the appliance for easier loading/unloading and reduced bending
• Provides a full-width pull-out drawer for storing laundry supplies
• Restores proper clearance and stable support when the existing pedestal is damaged
• Helps reduce strain by elevating the appliance to a more ergonomic height

• One pedestal assembly with drawer

• Follow for alignment and mounting instructions
• Installation may require moving the appliance; get assistance to avoid injury
• Disconnect power (and gas, if applicable) before starting work
• Use only manufacturer-recommended fasteners and torque specifications

Rubber foot for stand mixers. Installs at the base to provide stability. Replace if worn, cracked, missing, or damaged to prevent mixer movement.

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.  

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include: 

• Gas leaks emitting foul odors around seams or vents   
• Reduced heat conductivity hampering dryer functioning
• Moisture accumulation shortens fabric lifespan  
•  Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This Polished Stainless Steel Bowl with Handle can make up to 5 dozen cookies. Fits KitchenAid 3.5 Quart Tilt-Head models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

Flex edge beater for 3.5 quart tilt-head stand mixers. Scrapes bowl sides during mixing. Replace if worn, cracked, or damaged for optimal performance.

This 6 Wire Whip incorporates air into ingredients for fluffy whipped cream, perfect for frostings and cakes with whipped egg whites. Fits KitchenAid 3.5 Quart Tilt Head models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

Coated C-dough hook attachment for stand mixers. Mixes and kneads yeast dough efficiently. Replace if worn, damaged, or missing. Top-rack dishwasher safe.