Parts for Kitchenaid KSM3316XAV0: Base And Pedestal Unit Parts

Field assembly for stand mixers. Installs inside the motor housing. Replace if cracked, damaged, or causing electrical issues in your mixer.

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

Replacement power cord for stand mixers. Installs at the rear base to supply electricity. Order when your original cord is frayed, damaged, or missing.

This pedestal raises your front-load laundry appliance to a more comfortable height and adds a convenient storage drawer for laundry essentials. It restores proper fit and access when the original pedestal is missing or damaged. What it does:

• Provides a stable base to raise the washer or dryer for easier loading and unloading
• Includes a built-in storage drawer to hold detergents, dryer sheets, and small supplies
• Helps correct misalignment or instability caused by a cracked or broken pedestal
• Commonly used when the factory pedestal is cracked, dented, or no longer secures the appliance

• Designed for front-loading laundry appliances; follow OEM instructions for secure mounting
• Lift with help—pedestal and appliance can be heavy; avoid pinched fingers
• Disconnect power before moving appliances and ensure unit is level after installation
• If screws or brackets are missing from your kit, before assuming compatibility

This pedestal is the appliance base that raises a front-load washer or dryer for easier loading and provides a stable, elevated platform. It helps reduce bending and can add a small storage drawer for supplies. What it does:

• Raises the appliance to improve ergonomics and make loading/unloading easier
• Provides a stable platform to help keep the appliance level
• Often includes a storage drawer for laundry supplies
• Helps reduce strain when reaching into the washer or dryer

• One pedestal/storage base as specified by the OEM part number

• Disconnect power and water before installation
• Empty the appliance and have two people lift/move units to avoid injury
• Follow the OEM installation instructions and use recommended fasteners
• Do not modify the pedestal or appliance

This pedestal elevates a front-load washer or dryer to make loading and unloading easier and reduce bending. It provides a stable, level platform that positions the appliance at a more comfortable height. What it does:

• Raises the appliance to improve access and ergonomics during loading and unloading
• Creates a stable platform to help maintain proper appliance alignment
• Helps reduce strain from bending over to reach the drum or controls
• Designed to mount under the appliance using the factory attachment points

• One pedestal

• Disconnect power (and water supply for washers) before installing
• Follow the manufacturer's installation instructions and use proper fasteners
• Two-person lift recommended for safe placement and alignment

This replacement pedestal raises a compatible front-load laundry appliance for easier loading and adds a convenient storage drawer to hold detergents or accessories. It restores proper fit and creates more ergonomic access. What it does:

• Raises the appliance height for easier loading and unloading
• Provides a full-width storage drawer for laundry supplies and small items
• Keeps the washer/dryer stable and aligned on the floor
• Helps reduce bending and improves user access to the door opening

• Mounting hardware may be required from the appliance; verify included parts before starting
• Use two people to position and secure the appliance to the pedestal to avoid injury or damage
• Disconnect power and water supply (if applicable) and follow manufacturer instructions before installation

This pedestal raises a front-load laundry appliance to a more comfortable height and provides a stable base while keeping the area organized. It reduces bending and can help protect the machine from minor floor impacts. What it does:

• Lifts the washer or dryer to improve ergonomics and loading/unloading comfort
• Provides a stable, elevated base to help distribute appliance weight
• Offers built-in storage capacity for laundry accessories
• Helps keep the appliance off the floor, reducing direct contact with spills or dust

• Install on a level, solid floor surface and follow manufacturer torque/fastening instructions
• Use two people when positioning to avoid injury; pedestals can be heavy and awkward
• Disconnect the appliance and empty the pedestal drawer before moving or servicing

This pedestal serves as the elevating base that raises a front-load laundry appliance for easier loading and unloading, improving ergonomics and creating a stable, elevated footprint. What it does:

• Raises the appliance height to reduce bending and make loading/unloading easier.
• Provides a stable base that helps keep the appliance level during operation.
• Helps protect the appliance underside from spills and floor debris.
• Can improve accessibility when pairing with other laundry storage solutions.

• Disconnect power (and water if applicable) before starting installation.
• Use two people to lift and position the appliance onto the pedestal to avoid injury or damage.
• Align and secure the appliance to the pedestal following the manufacturer's instructions.
• Check level and stability after installation; do not operate an unlevel appliance.

Rubber foot for stand mixers. Installs at the base to provide stability. Replace if worn, cracked, missing, or damaged to prevent mixer movement.

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.  

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include: 

• Gas leaks emitting foul odors around seams or vents   
• Reduced heat conductivity hampering dryer functioning
• Moisture accumulation shortens fabric lifespan  
•  Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This Polished Stainless Steel Bowl with Handle can make up to 5 dozen cookies. Fits KitchenAid 3.5 Quart Tilt-Head models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

Flex edge beater for 3.5 quart tilt-head stand mixers. Scrapes bowl sides during mixing. Replace if worn, cracked, or damaged for optimal performance.

This 6 Wire Whip incorporates air into ingredients for fluffy whipped cream, perfect for frostings and cakes with whipped egg whites. Fits KitchenAid 3.5 Quart Tilt Head models KSM3306, KSM3311, KSM3316, KSM3317, 5KSM3310, 5KSM3311, 7KSM3311, 9KSM3311.

Coated C-dough hook attachment for stand mixers. Mixes and kneads yeast dough efficiently. Replace if worn, damaged, or missing. Top-rack dishwasher safe.