Parts for Electrolux E36DF76TPSB: Body Parts

Replacement oven cavity liner for your range. Installs inside the oven chamber to provide a clean cooking surface. Order when original is cracked or damaged.

Mounting screw for gas ranges. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during appliance service.

Replacement oven rack assembly for gas ranges. Installs inside the oven cavity to support cookware. Order when your existing rack is bent, warped, or damaged.

Oven broiler pan catches drippings and supports food during broiling. Replace this pan if yours is warped, damaged, or missing for safe cooking and easier cleanup.

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

This is a door-activated switch that detects whether the oven door is open or closed. It controls functions such as the oven light or signals the control board about door position. Replace this switch if the oven light stays on or off regardless of door position, or if the oven does not operate correctly due to a faulty door signal.

Mounting bracket secures range components to the cabinet or frame. Replace if bracket is bent, cracked, or broken to restore proper alignment and support.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Power cord for electric ranges. Connects your range to the wall outlet. Replace if your cord is frayed, damaged, or missing for safe operation.

This replacement cabinet insulation helps reduce heat transfer into the refrigerator cavity so cooling components run efficiently and food stays colder. It restores proper thermal barrier and helps control frost and compressor run-time. What it does:

• Replaces worn or damaged foam insulation behind the interior liner
• Restores the refrigerator's thermal barrier to improve cooling consistency
• Helps reduce frost buildup and excessive compressor cycling caused by poor insulation
• Supports sealed-system efficiency by minimizing unwanted heat gain

• Install behind the interior liner or in the cabinet cavity as original; follow OEM location and orientation
• Use proper personal protective equipment when handling insulation (gloves, eye protection)
• Avoid compressing or tearing the foam during installation to maintain thermal performance
• For best results, inspect surrounding seals and fasteners and replace any damaged components

The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.

Symptoms of a bad Terminal Block Kit include:

• Signs of burning or melting at the connection points,
• Flickering power or intermittent operation of the appliance,
• A burning smell from the appliance area.

Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is the broil heating element located at the top of the oven cavity, responsible for producing high, direct heat for broiling food. It is a looped metal element that glows red when energized. Replace this element if the broiler does not heat, heats unevenly, or if visible damage such as blistering, cracking, or burn-through spots are present.

Range not heating or baking unevenly? This bake element restores proper oven temperature. Common fix for no heat issues. Moderate DIY repair, 30-45 minutes.

This mounting bracket secures components inside the appliance to restore proper alignment and stability. Replacing a damaged bracket helps stop rattling, sagging, or loose internal parts for quieter, safer operation. What it does:

• Provides a secure anchor point for internal panels or assemblies
• Prevents movement that can cause rattling, misalignment, or wear
• Restores proper fit between components after damage or corrosion
• Helps maintain safe, stable operation of the affected area

• Intended for experienced DIYers;
• Disconnect power and, where applicable, water supply before beginning work
• Use correct fasteners and torque per OEM guidance; do not force or bend the bracket
• Inspect adjacent components and replace any worn hardware to ensure a secure fit

This is the door lock motor and switch assembly used in wall ovens and ranges to engage and disengage the door lock during the self-clean cycle. The motor drives the latch mechanism while the integrated switches signal the control board whether the door is locked or unlocked. Replace this assembly if the oven will not start the self-clean cycle, the door fails to lock or unlock, or you receive an error code related to the door lock.

This cover mounts over the convection fan assembly inside the oven cavity, shielding the fan blades and motor from direct exposure to food debris and grease. It helps direct heated air circulation for even cooking. Replace it if the cover is warped, rusted, cracked, or if you hear unusual rattling noises coming from behind the oven's rear wall during convection cooking.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.

The Thermostat is an OEM component specifically designed for Frigidaire gas stoves. This thermostat controls burner temperatures by regulating gas flow. 

Causes of a bad thermostat include wear and tear over time, overheating, moisture damage, or power surges that can degrade electrical components.

Symptoms of a bad thermostat include:

• Inability to control burner temperatures accurately 
• Burners heating to excessively high or low levels
• Fluctuating burner output unrelated to dial settings
• Complete failure of one or more burners to light

Replace it today with this OEM Frigidaire part to maintain safe and reliable stove operation. This thermostat replacement is also compatible with Gibson and Kelvinator gas ranges, as well as select Kenmore models. 

The Convection Motor Assembly is an OEM part for Frigidaire ranges. It powers the convection fan, providing even heat distribution and efficient cooking in your range's convection oven.

A bad convection fan motor can be caused by motor failure, damage, or wear and tear. Signs of a faulty fan motor include the convection oven not reaching or maintaining the desired temperature, uneven cooking results, or unusual noises coming from the oven during operation.

Symptoms of a bad fan motor can include:

• Inconsistent or inadequate heating 
• Uneven cooking or baking results
• Unusual noises coming from the oven 

Replace your malfunctioning or worn-out convection fan motor with this genuine OEM part to restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

This is a 2500-watt circular heating element located at the rear wall of the oven cavity, surrounding the convection fan. It provides even heat distribution during convection baking and roasting by working in conjunction with the fan. Replace this element if your oven is not heating properly in convection mode, food is cooking unevenly, or the element is visibly damaged or broken.

Replacement 10-24 x 5/8 screw for securing panels, brackets, and trim on ranges and ovens. Needed when original hardware is stripped, missing, or worn.

Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.

Hex flange nut with 10-32 thread secures components in appliances. Replace if stripped, missing, or damaged. Flange provides broader bearing surface.

Black mounting screw that secures range body side panels. Replace if stripped, missing, or corroded. 8-18 x 11/16 inch fastener for structural assembly.

Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

Specs: 8 - 18 x 0.500

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.