Parts for Electrolux E36GF76JPS1: 07 - Body Parts

This front control panel houses and protects the oven/range console, providing the surface and mounting for the touchpads, buttons, and display. Replaces a cracked, faded, or damaged control surface to restore appliance appearance and button access. What it does:

• Provides the finished front surface for the console and the mounting area for controls and display
• Protects underlying electronics from spills, grease, and light impact
• Restores access to buttons/touchpads that stick, crack, or no longer register properly
• Helps improve the appliance's cosmetic appearance when the original panel is dented or discolored

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Remove adjacent trim or bezels as needed; handle the panel carefully to avoid scratching the finish
• Keep screws and small fasteners organized; some connectors or overlays may need to be transferred from the old panel

This control panel is the front console trim that houses the user interface for your range or oven, restoring a clean, functional surface and button access so controls operate and look like new. What it does:

• Provides the cosmetic and protective front surface for the appliance control area
• Secures and aligns push-buttons, touchpads, and display openings
• Restores proper button actuation when cracked, warped, or damaged
• Helps prevent dirt and moisture from reaching internal electronics

• One control panel

• Disconnect power at the breaker or unplug the appliance before starting any work
• Remove mounting screws and any attached trims or bezels to access the panel
• Handle carefully to avoid scratching the finish or damaging attached clips

Mounting screw for gas ranges. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during appliance service.

This glass shelf replaces a cracked or worn interior shelf to restore stable, easy-to-clean storage space in your refrigerator. Tempered glass provides a flat surface for food containers and helps keep items organized and visible. What it does:

• Provides a sturdy, level surface for storing food, containers and leftovers
• Replaces broken, chipped or scratched shelves that can trap spills or block airflow
• Helps maintain interior organization so items are easier to find
• Smooth glass surface wipes clean quickly to remove spills and crumbs

• One tempered glass refrigerator shelf

• Remove food and any loose items from the shelf area before installing
• Slide shelf into the existing support rails or brackets until it sits securely
• Handle glass carefully and wear gloves to avoid injury from edges

Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.

This control panel is the outer console that houses the oven/range user interface and protects internal controls. It restores the appliance's front appearance and provides a stable mounting surface for buttons, displays, and switches. What it does

• Replaces a cracked, faded, or warped front console to restore the appliance's appearance
• Provides the mounting surface and openings for the control keypad, display, and selector switches
• Helps protect internal electronic components from spills and debris
• Can stop erratic input caused by damaged or loose panel areas around buttons

• One control panel (outer/console) as shown

• Installation requires removing the range/oven console trim and disconnecting power before starting
• Handle with care to avoid scratching the finish; align mounting tabs and secure with factory screws
• Ensure connectors are reattached correctly before restoring power

Broiler pan for electric and gas ranges. Installs in oven cavity for broiling. Replace if cracked, warped, rusted, or heavily stained beyond cleaning.

Broiler pan insert sits under the broiler burner to catch drips and grease. Replace if cracked, warped, or heavily stained for cleaner broiling.

Fix an oven light that won't turn off or controls that don't respond. This control panel switch restores reliable on/off function. DIY-friendly repair.

Mounting bracket secures range components to the cabinet or frame. Replace if bracket is bent, cracked, or broken to restore proper alignment and support.

Fix an oven door that won't lock during self-clean or clean cycle errors. This door latch assembly secures the door and reports lock status to the control.

Replace your range oven door seal to maintain heat efficiency and prevent energy loss. Essential when you notice gaps, cracks, or heat escaping. Verify fit.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

This refrigerator door gasket creates a tight seal around the door edge to help maintain proper temperature and energy efficiency. It replaces a worn or torn seal to reduce warm air leaks and improve cooling performance. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and uneven temperatures inside the compartment
• Reduces compressor run-time caused by air leaks
• Common symptom: warped, cracked, or compressed gasket that no longer seals

• One refrigerator door gasket

• Inspect door edge and mounting channel; clean before installing the new gasket
• Gasket may need to be warmed or eased into the channel for a snug fit
• If the door is misaligned or hinge issues exist, address them before gasket replacement
• Turn off power to the appliance or disconnect before doing any repairs; wear work gloves to avoid sharp edges

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Replacement power cord for gas ranges and ovens. Connects appliance to wall outlet. Needed when original cord is damaged, chewed, cracked, or missing.

This refrigerator cabinet insulation reduces energy loss and helps maintain even temperatures for reliable food preservation. It fits behind the liner to improve cooling efficiency and reduce frost buildup when installed correctly. What it does:

• Provides thermal barrier between cabinet shell and interior liner to help maintain set temperatures
• Helps prevent condensation and reduces frost formation on evaporator and interior surfaces
• Restores proper insulation when damaged, torn, or missing, improving compressor runtime and temperature stability
• Works with factory mounting locations and shapes to seal gaps around the cabinet

• Turn off power to the appliance and unplug before beginning any repair.
• Remove interior liners or panels as required to access factory insulation.
• Replace only the damaged insulation; avoid compressing or bunching material during installation.
• Use proper protective gloves and a dust mask when handling older insulation to avoid irritation.

Spacer for ranges and ovens. Maintains proper spacing between components. Replace if worn, cracked, or missing to ensure correct alignment and fit.

This inner cabinet liner replaces a cracked, stained or warped freezer interior to restore a clean, smooth surface and help contain spills. It provides the molded interior surface that holds shelves and drawers in place. What it does:

• Restores the freezer's interior skin that supports shelves, bins, and seals
• Stops drafts and moisture from getting behind the liner when warped or damaged
• Prevents food contact with cracked or stained surfaces that can harbor odors
• Helps maintain proper airflow paths inside the freezer cabinet

• Disconnect power and empty the freezer before starting work
• Removal and installation may require removing trim pieces, shelves, and fasteners; keep track of mounting hardware
• Handle carefully to avoid cracking the replacement liner during install

Fix F95 error code or oven door that won't lock during self-clean cycle. This door lock motor assembly repair takes about 15 minutes with basic tools.

Range won't start or respond to controls? This electronic control board restores operation by managing timing and power to key components for proper cycles.

Replace a cracked, broken, or missing access panel cover on your range or oven. Secures internal components, restores finished appearance, and shields wiring.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

Securing nut for ovens and ranges. Holds interior components like convection fans in place. Replace if stripped, damaged, or missing during repair.

Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.

Oven not heating evenly or reaching temperature? This bake heating element restores radiant heat for consistent baking and roasting. Direct replacement.

Replace your worn or missing range spacer to restore proper component alignment and spacing. This small plastic part maintains correct clearances inside the unit.

This replacement insulation panel fits inside the appliance cabinet to help reduce heat transfer and dampen noise for more consistent temperatures. It restores thermal barrier performance and helps the unit run as designed. What it does:

• Provides thermal insulation between cabinet walls and internal components
• Helps reduce condensation and frost buildup when properly installed
• Dampens vibration and operating noise from the compressor and fans
• Can improve temperature stability by restoring the original thermal barrier

• One insulation panel as shown

• Disconnect power (and water if applicable) before starting any repair
• Access may require removal of panels, shelving, or trim pieces
• Handle with care; avoid compressing, tearing, or contaminating the insulation material
• Wear gloves and eye protection; follow manufacturer torque and fastener guidance when reassembling

This wiring harness is the appliance's factory-style wire assembly that connects electrical components for reliable power and signal routing. Replacing a damaged harness restores proper connections and helps eliminate intermittent or no-power issues. What it does:

• Links controls, motors, and sensors so components receive power and signals
• Restores lost or intermittent electrical connections that cause failures
• Helps prevent shorts or open circuits from frayed or broken wires
• Supports safe operation by keeping wiring organized and secure

• One wiring harness assembly as shown

• Disconnect power to the appliance before inspecting or replacing the harness
• Handle connectors gently and seat each plug fully until it clicks
• Route the harness following the appliance's wire channels and retainers to avoid pinching

Replacement mounting screw for ovens and ranges. Secures panels, brackets, and components. Order a new screw if yours is stripped, missing, or damaged.

Mounting screw for securing range components and panels. Replace if screw is stripped, missing, or no longer holding parts securely in place.

Mounting screw for ranges, ovens, and cooktops. Secures panels, brackets, or internal components. Replace if missing, stripped, or damaged.

Replacement 10-24 x 5/8 screw for securing panels, brackets, and trim on ranges and ovens. Needed when original hardware is stripped, missing, or worn.

Mounting screw for electric range, oven, or wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged.

Mounting screw for electric range and wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repair.

8-18 x 0.500 mounting screw for appliances. Secures panels, brackets, and components. Replace if stripped, missing, or damaged during repairs.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

Replacement mounting screw secures refrigerator panels, brackets, and trim to the chassis. Needed when original fasteners are stripped, missing, or damaged.

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

Secures panels, brackets, and internal components in your refrigerator. Replace when the original fastener is missing, stripped, or corroded for proper fit.