Parts for Kenmore 790.97713412 (79097713412, 790 97713412): Body Parts

A small replacement clip that secures trim, panels, or wiring in place to restore a snug fit and reduce rattles. Use this direct-fit clip when the original is cracked, broken, or no longer holds components securely. What it does

• Secures panels, trim pieces, or small assemblies to prevent movement and vibration.
• Holds wiring harnesses or tubes in position to reduce rubbing and wear.
• Restores proper alignment of fitted parts that have come loose.
• Commonly replaces brittle or broken plastic clips that cause rattling or gaps.

• Disconnect power to the appliance before attempting any service.
• Remove surrounding trim or panels carefully to avoid damage to adjacent parts.
• Install the clip by aligning it with the mating slot or hole and pressing until it snaps into place.
• If the mating feature is damaged, replace or repair that surface to ensure a secure fit.

Control panel for electric and gas ranges. Replaces cracked, faded, or damaged front panels. Installs on the range face to restore appearance and protect controls.

Screw that adjusts and secures the leveling leg to your range base or bracket. Replace if stripped, bent, or missing to restore stable footing and level your appliance.

Oven rack for gas ranges. Slides into side guides to support cookware during baking. Replace if bent, warped, rusted, or damaged affecting stability.

Replace your worn, warped, or missing oven rack. This rack slides into the oven cavity to support cookware during baking and roasting operations.

This replacement shield protects nearby components from heat and debris, helping the appliance run safely and reliably. It restores the original barrier that prevents heat transfer to wiring and adjacent parts. What it does:

• Shields adjacent components from heat and direct exposure to the heating source
• Helps prevent heat-related damage to wiring, sensors and plastic parts
• Reduces risk of overheating hotspots that can cause premature part failure
• Can resolve issues where visible warping, cracks or burn marks are present

• One replacement shield as shown

• Turn off power and unplug the appliance before inspecting or replacing this part
• Handle with care — sharp edges may be present; use gloves and eye protection
• Follow the appliance service manual for mounting orientation and fastener torque
• If other components show heat damage, inspect and replace those parts as needed

Broiler pan for electric and gas ranges. Installs in oven cavity for broiling. Replace if cracked, warped, rusted, or heavily stained beyond cleaning.

Broiler pan insert sits under the broiler burner to catch drips and grease. Replace if cracked, warped, or heavily stained for cleaner broiling.

Fix uneven heating or heat loss around your gas range door with this replacement door gasket seal. Creates an airtight seal to maintain temperature.

Oven light stays on or won't turn on when door opens? This door-activated switch restores automatic light control. Easy 15-minute DIY repair.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Oven displaying probe error or reading temperature when unplugged? This meat probe monitors internal food temperature. Easy DIY replacement part.

Receptacle assembly for electric and gas ranges. Connects power supply to heating elements. Replace if cracked, melted, or showing burn marks.

Replace your range's vent tube if the original is cracked, damaged, or missing. This duct component directs airflow within your appliance. Direct fit.

Range won't power on or tripped breaker? Burnt or loose terminal block connections are often the cause. This kit restores safe power delivery. DIY-friendly.

Broiler not heating or working? This broil element restores high-heat cooking. Easy DIY fix with four screws and wire connectors. Takes about 30 minutes.

Oven not heating or cooking unevenly? This bake element restores proper temperature control in electric ranges. Direct replacement for failed elements.

Fix an oven door that won't unlock after the cleaning cycle. This door lock motor controls the latch mechanism. Common DIY repair for stuck oven doors.

Fix a range that won't heat, displays error codes, or has unresponsive controls with this control board. Common repair for electronic failures in electric ranges.

Oven won't hold temperature or display is dead? This control board restores temperature regulation and clock/timer functions. Moderate DIY repair.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

Securing nut for ovens and ranges. Holds interior components like convection fans in place. Replace if stripped, damaged, or missing during repair.

Oven won't heat or shuts off during use? A blown thermal fuse cuts power to prevent overheating. Simple diagnosis with a multimeter, quick replacement.

If your oven's convection fan is making noise or not circulating air, this motor replacement part restores proper airflow for even cooking.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

Anti-tip bracket kit installs to the floor behind your gas range to prevent tipping hazards. Replace missing, broken, or damaged brackets for safety.

Fix leaking or no water flow to your ice maker or dispenser. This water line tube routes water inside your refrigerator. Direct-fit replacement part.

This wiring harness is an electrical connector assembly that routes power and signals between appliance components, restoring reliable electrical connections for proper operation. It helps replace damaged or worn wiring that can cause intermittent or no power to a circuit. What it does:

• Carries power and control signals between components so parts operate as intended
• Replaces frayed, burnt, or disconnected wiring that can cause intermittent operation or failure
• Restores secure connector fit to prevent arcing or poor contact
• Helps eliminate symptoms like a non-functioning component, inconsistent behavior, or visible wire damage

• Disconnect appliance power (unplug or shut off breaker) before starting any work
• Match connectors and routing to the original harness; do not force connectors together
• Inspect connectors and terminals for corrosion; replace harness if insulation or wires are damaged
• Secure the harness with existing clips or ties and test operation after reconnection

Ceramic catalyst insert for range oven vents. Breaks down cooking odors and residues at high temperatures. Replace if cracked, clogged, or missing.

Replace a cracked or missing power board spacer in your range. This insulating bushing mounts between the control board and chassis for proper spacing.

Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.

Replace your oven's broken or missing rack spring. This small metal spring helps support and stabilize oven racks during sliding and positioning.

Hex flange nut with 10-32 thread secures components in appliances. Replace if stripped, missing, or damaged. Flange provides broader bearing surface.

Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.