Bolens Bearing Parts

This genuine OEM replacement auger bearing flange fits a wide range of snowblowers. The auger is the part of a snowblower that scoops up and moves it away from the area being cleared. It is held in place by a bearing, and this flange connects to the bearing to reduce friction and motion. This flange helps prevent grinding, which would degrade the bearing and cause the auger to stop working effectively. Bearings and flanges receive a lot of wear and tear because they are built to absorb friction. Over the natural course of an appliance's life, bearings and flanges will normally wear down and need replacing. If a bearing flange snaps, the auger will no longer turn, and the snowblower will not move snow. To replace a bearing flange, use a socket wrench to gain access to the belt cover and then detach the auger housing. Remove the pulley and thread, then take the auger out of its housing. Pull out the old auger bearing flange and install the new part. This part is compatible with Yard Man, Troy-Bilt, Craftsman, Bolens, MTD, Huskee, and Yard Machines snow blowers. It comes sourced from the original manufacturer and ships individually.

This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This is a replacement part for select riding mowers designed to ensure smooth rotation for years of use. This part is circular and tapers off into a hexagonal shape to support rotating shafts that create friction inside of machinery. Rotating parts are almost a given in most machinery like riding mowers, so the hex flange bearing provides support in multiple ways to parts such as wheels, rotors, and gears.The hex flange bearing serves two fundamental roles to make machinery run efficiently. For starters, friction will inevitably occur in rotating shafts, so bearings reduce the amount of friction and related wear and tear. The second function of this part is protecting the rotating from damage due to pressure created during operation.This genuine OEM sourced replacement part is intended to be used for lawn tractors from MTD and other yard machines. This part is compatible with manufacturers including Yard Machines, Bolens, Yard Man, Troy-Bilt, Cub Cadet, and Husky. A wrench may be used for an easier replacement installation. This item is available for purchase individually.

The bearing sleeve is an authentic part designed for use with lawn tractors of the riding variety. This bearing sleeve is located on the transmission shaft and used to assist in securing the bearing in its place. The location of this part means that it is susceptible to constant vibrations and other threats. This part can wear down over time and eventually require a replacement, or need to be replaced as a result of damage or a direct impact. Using a genuine product like this replacement bearing sleeve will provide an exact fit for compatible models. This genuine OEM bearing sleeve is manufactured to specific standards by MTD. It is compatible with tractors from MTD, RYOBI, Bolens, Yard Machines, Cub Cadet, HUSKEE, Yard Man, and Troy-Bilt. There are hundreds of tractors that can use this specific bearing sleeve. It is made of durable metal and sold as an individual unit. A wrench will be required for this part replacement, but it is an easy task that should not take a lot of time. Always disengage the engine before starting any repairs and ensure that it is not hot to avoid burns or causing potential damage.

The sealed ball bearings are used as a means to limit the amount of friction that occurs between a fixed part of the assembly and a rotating shaft. They can be used for numerous applications in lawn and garden equipment. The ball bearings are used in various locations of different types of machines, so the issues that could crop up will vary. Typically, bad ball bearings will create knocking sounds in the engine, or parts in the engine could be difficult to turn. When the ball bearings are no longer sealed or not functioning properly, they should be replaced. This genuine OEM replacement ball bearing is sold individually. The ball bearing works with many models of lawn mowers, snowblowers, edgers, wood chippers, and tillers. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. Buyers should always ensure they are buying the correct parts for their make and model.

This bearing cup is a genuine MTD part, sold individually. This bearing cup can be used as a replacement part in a lawn mower. The purpose of the bearing cup in a lawn mower is to work in conjunction with a cone to provide stability in a bearing so that the machinery can withstand radial and axial load during the operation of the appliance.The bearing cup in a lawn mower might have to be replaced if the component exhibits signs of damage. If the bearing cup has been compromised in the form of puncturing, scraping, denting, cracking, warping, or eroding at some point within the lifespan of the lawn mower, the component should be removed and replaced by this genuine OEM replacement part in order to ensure proper functionality and safe use of the appliance as a whole.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This bearing cup is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Yard Man, Huskee, Bolens, and MasterCut.

This genuine OEM replacement part is a flange bearing designed to be used with a wide range of lawn tractors. A bearing is a mechanical part made to restrict movement and prevent other parts from shifting about in the tractor. This is a flange bearing, referring to its particular shape. The bearing slides into place while the flange creates an added layer of protection around the connection. While restricting motion, bearings experience a lot of friction. After a long period, a bearing may eventually begin to wear away and other parts may start to feel loose or pull apart. This can cause more widespread damage in a lawn tractor, such as a broken suspension or disconnected lower deck. The difficulty of this repair will depend largely on where the flange bearing that needs replacing is located. The odds are that any repair will require a socket wrench set, a screwdriver, and a pair of pliers to access any flange bearing. This replacement flange bearing is sourced from its original manufacturer and will fit tractors made by Ryobi, MTD, Bolens, Troy-Bilt, Cub Cadet, Yard Man, and Yard Machines. This part does not include any additional hardware.