Bolens Cap, Lid & Cover

This genuine air cleaner cover assembly protects the air filter cleaner on select string trimmers from the elements and exposure to potential debris and damage. This allows the filter to work properly and avoid serious clogs or damage in the meantime. The cover consists of a durable plastic housing, but it can become cracked or damaged over time or due to an incident. In the event that the air cover is broken, it should be replaced right away to prevent further damage or cause issues with the air filter. This genuine OEM air cleaner cover is manufactured by MTD to exact standards. It offers compatibility with several string trimmers from MTD, as well as those from Yard Man, Bolens, Yard Machines, Troy-Bilt, and Cub Cadet. This kit includes the plastic air filter cover, the plastic insulator, and two metal bolts that attach the cover to the air filter base assembly on the engine. It is recommended to replace the air cleaner gasket at the same time, which will require a separate purchase. Always allow the engine to cool and wear gloves when doing any engine work.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

Blade guards are essential for protection from flying debris that may be kicked up or disturbed by the edger blade. They prevent debris such as small stones from being kicked up while the equipment is in use and are an important safety feature. Operating an edger without a blade guard can be dangerous. This edger blade guard can be used to easily replace worn out or broken blade guards.This edger blade guard is a genuine OEM part that has been sourced directly from the manufacturer. This replacement edger blade guard can be used on multiple different edger models including Troy-Bilt, Craftsman, and Husky. Please note that this part is sold individually.

A valve cover is a small but important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a snow blower or a tiller. It is compatible with products by brands such as MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Bolens, and Husky.The valve cover part is crucial because it plays a big role in keeping the engine protected and healthy. The valve cover is a type of casing that can be found on the top of the machine's engine. It covers the valves of the engine, which in turn protects the machinery from the elements and prevents oil leaks. Over time, natural wear and tear with exposure to the elements will occur, leaving evidence on the valve cover in the form of cracks, corrosion, and misalignment of the valve cover. If the valve cover shows signs of wear such as these listed, it can make fluid leak into the engine compartments. If this happens, it is very serious and will ultimately lead to engine failure.The replacement or repair process of the valve cover should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This valve cover is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.

This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.

This genuine MTD belt cover can be used as a replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, edgers, and lawnmowers. The purpose of a belt cover is to protect the gears, the belt, and the engine and its components from accumulating dirt and debris internally, which can cause individual components to malfunction and fall into disrepair.A belt cover will have to be replaced in the event that it can no longer protect the gears, the belt, and the engine. A belt cover can suffer from damage as a result of overuse or direct collision; this form of damage can limit the ability of the belt cover to perform its precautionary function. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This OEM belt cover part is compatible with the following brands: MTD, Craftsman, Cub Cadet, and Yard Machines. This part is sold individually.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This replacement part is a dust wheel. This is a genuine replacement part made by MTD. This part is used to help prevent wheels from becoming too dusty or dirty when not in use. A new dust wheel might be needed if the current on is missing or damaged. If the dust wheel is torn or unable to close properly, it might be time to replace it. This is a fairy simple repair as the user should be able to slip the dust wheel on over the current wheels. Be sure to purchase the correct amount as these are sold individually. Refer to the user manual for more instructions on how to replace this specific part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This hub cap is for use with select walk-behind mower models. The hubcap serves the same purpose as those found on automobiles. They serve to protect the wheel and to reduce the amount of dirt, debris, and moisture that collects on the wheel hub. The hub caps are simple parts, but if they are missing or damaged, the owner will want to replace them.The hub caps are made from durable plastic. They can handle the regular use that a mower sees without trouble, but they could still become damaged. They might become loose and need to be replaced, as well. Removing the old hub caps and adding new ones is a fast and simple repair.These hub caps will work with certain mower models from MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Husky. The hub caps are sold individually. Owners may need to buy more than one. This is a genuine OEM replacement part sourced from the manufacturer.