Bolens Trimmer

Fuel return line hose routes excess fuel from the carburetor back to the tank. Replace if cracked, brittle, leaking, or damaged to prevent fuel loss.

This is a small-diameter fuel return line that connects to the engine's fuel system, routing excess fuel back from the carburetor or fuel delivery components. It ensures proper fuel circulation and pressure regulation in the engine. Replace this line if it is cracked, dry-rotted, leaking fuel, or causing hard starting and fuel smell around the engine.

The fuel line assembly with filter is the complete line that carries fuel from the tank to the engine carburetor, with an inline filter attached to catch debris and contaminants before they reach engine components. Keeping the fuel clean protects the carburetor and ensures consistent fuel delivery. Replace this assembly if the engine is hard to start, runs roughly, stalls frequently, if you notice fuel leaks, or if the filter is visibly clogged or deteriorated.

Replacement fuel cap assembly for tillers and outdoor power equipment. Seals fuel tank, prevents debris entry, and features vent slots. Needed when original cap is cracked, broken, or gasket is worn.

Protects the air filter on string trimmers from debris and weather exposure. Replace if cracked, broken, or missing to keep filter functioning properly.

Spring retainer for line trimmers. Secures internal springs in place during operation. Replace if cracked, broken, or missing to restore proper assembly.

Flexible drive shaft for gas line trimmers. Connects the engine to the cutting head. Replace if cracked, worn, or broken for proper power transmission.

Flexible drive shaft for gas line trimmers. Connects the engine to the cutting head. Replace if cracked, worn, broken, or causing excessive vibration.

Fastening nut for tillers, trimmers, blowers, and edgers. Secures components by working with bolts. Replace if stripped, corroded, or missing.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.

Engine won't start when you pull the cord? This recoil starter assembly includes the rope, pulley, and spring needed to restore pull-start function.

Excessive engine noise from your gas trimmer? This muffler assembly reduces motor sound during operation. Direct-fit replacement for string trimmers.

This is a flexible drive shaft that transfers rotational power from the engine to the cutting head of a string trimmer. It runs through the length of the trimmer shaft tube and spins the trimmer head assembly. Replace this part if the trimmer head stops spinning while the engine is running, or if you hear grinding or rattling noises from inside the shaft tube.