Bolens Trimmer

This is a high-quality retainer that is typically used in string trimmers. It is made of durable metal and fits in the area between the outer spool assembly and the spring on the trimmer. The purpose of the retainer is to ensure the spool stays in the correct location while the string trimmer is being used. This component can become damaged, break, or be lost and will need to be replaced in order to be sure the spool is supported and secure.If there is an issue with the string trimmer retainer, it can cause excessive noise during use. It also may prevent the trimmer from starting if other components are affected. A wrench and work gloves may be required to replace the part. Gain access to the retainer and remove it using the wrench. The new replacement part can be installed in the same place. Reassemble other parts, and the trimmer will be ready to use.This retainer is designed to fit string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, MTD, and Yard-Man. It is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a genuine replacement for MTD engines in select models of lawn and garden equipment. The carburetor gasket is situated between the carburetor body and the engine to provide a secure seal to keep air from leaking out. The engine needs proper compression to run and that is ensured by gaskets and seals like this one. Over time, however, these are exposed to constant heat and pressure and can shrink or become damaged as a result. Replacing gaskets is typically considered a part of routine maintenance on most equipment. Gaskets should be replaced immediately when they fail, and inspected any time work is done on the carburetor. This OEM carburetor gasket is designed to work with more than 150 different models of blowers, trimmers, cultivators, and edgers. It can be used in products from brands like MTD, RYOBI, Bolens, Troy-Bilt, Cub Cadet, Husky, Yard Man, and Yard Machines. The gasket is made of durable metal material and is sold as a single unit. Hardware is not included with this item. Be sure to cool the engine before performing repairs and drain the fuel system to prevent leaks and spills when working on the carburetor and its components.

This replacement part is a rope guide, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This rope guide allows the user to pull start the engine. The rope is connected to the transmission inside the engine that allows it to be turned off and on when desired. A new rope guide might be needed if the current one is damaged or missing. If the user is unable to start the lawn mower, then the rope guide might not be connected and should be replaced. Be sure that the engine is completely powered off while attempting this repair as this part is close to the engine inside the appliance. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer to ensure proper fit in all appliances. Reference the owner's manual for more specific guidance.

This replacement part is a locking rod. This is a genuine replacement part made by MTD. This specific part is found in many different machines and is important for ensuring the user is kept safe if the compressed air supply fails.A new locking rod might be needed if the current one is damaged or missing. This can include being dented, cracked, or bent. If the user is noticing issues inside the machine, such as issues with the air compression, it can be due to a malfunctioning locking rod. Be sure the engine is powered down during this repair. Refer to the appropriate user manual before beginning to repair this part. This locking rod is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This blade guard is a genuine MTD replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The blade guard is a safety feature on lawn trimmers that protects appliance users from physical damage as a result of coming into contact with the blades.A lawn trimmer blade guard might have to be replaced if there is damage to it that reveals the blades, thereby endangering the appliance user through exposure to the sharp blades. If the blade guard is damaged, it must be removed and replaced immediately, as the lawn trimmer blades should be protected with an adequate housing device. To remove and replace a blade guard for a lawn trimmer, one will need a flathead screwdriver. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This blade guard is compatible with the following brands: Ryobi, MTD, Yard Man, and Troy-Bilt. This part sold individually.

This part is a replacement handle bracket assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle bracket assembly in line trimmers.This handle bracket assembly ensures that the line trimmer handlebars are securely and properly attached to the drive shaft. This part will require replacement if corroded, faulty, or broken in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle bracket assembly, the appropriate owner's manual and equipment diagrams should be referred to. This handle bracket assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with line trimmer models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This recoil starter pulley is a genuine MTD part, sold individually. This recoil starter pulley can be used as a replacement part for outdoor appliances with engines such as snowblowers, tillers, string trimmers, leaf vacuums, and leaf blowers. The recoil starter pulley fits into the recoil pull-start mechanism such that when the starter rope is pulled, the cord moves around the recoil starter pulley, and the engine is powered on. If the spring that holds the pulley in place suffers damage that loosens its tension, the pulley could fall out of position. Additionally, the pulley could corrode or wear down with long-term use, weakening it beyond functionality. If this damage seems imminent, this recoil starter pulley should be ordered as a genuine OEM replacement part immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This recoil starter pulley is compatible with the following brands: MTD, Ryobi, Troy-Bilt, Yard Machines, Bolens, and Yard-Man.