Briggs & Stratton Engine Parts

Here is a replacement pump diaphragm spring that is identical to the original part that came with the machine. The pump diaphragm spring is used for a range of different types of engines. The spring is made from metal, and it attaches to the spring cap. This spring helps to ensure the proper return motion of the diaphragm, causing the fuel located in the pump chamber to be pushed through the outlet port and into the carburetor. The pump diaphragm spring could need to be replaced for several reasons. In some cases, it might have become bent or misshapen, which would prevent it from working properly. It could also become corroded over time since it is made from metal. Replacing the spring will typically require a wrench set, screwdriver, and a nut driver. This is a genuine OEM replacement part, which is sold individually. The pump diaphragm spring can be used for more than 150 types of machines including generators, blower vacuums, tillers, log splitters, and wood chippers. Compatible brands include Briggs & Stratton, Craftsman, Toro, Simplicity, and Cub Cadet.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.

O-rings are used in various locations and applications to seal and protect connections throughout the engine. The O-ring is typically used for rigid connections where a proper seal is required for optimal functioning. It is critical to have the right size and style of O-ring installed for proper operation. These parts tend to wear over time and that can affect their ability to seal. If O-rings are degraded or damaged in any way, they need to be replaced as soon as possible to prevent further damage. This O-ring is manufactured to exact specifications by Briggs & Stratton to provide a genuine OEM replacement. It can be used in various Toro, Briggs & Stratton, and Lawn-Boy engines. Typically found in lawn tractor engines, this part is compatible with more than 150 machines. This O-ring is made from durable materials and sold individually. Always disconnect the spark plug before beginning engine work and wear gloves for hand protection.

The fuel tank is a genuine OEM replacement for select Briggs & Stratton engine models. This 4-quart fuel tank is mounted on the engine and is designed specifically for remote mounting. This tank holds the fuel and connects via fuel lines to the carburetor to provide fuel to the engine. Over time, this tank can become damaged or worn out. Some owners may just want to upgrade to a remote mounting tank from their original model. This replacement tank includes the fuel cap and tank assembly and offers an exact fit for compatible models. This OEM fuel tank is used with various models of push mowers that include a compatible Briggs & Stratton engine. These include mowers from Briggs & Stratton, Troy-Bilt, and others. This fuel tank is made of durable plastic material and sold as an individual unit. Always drain the fuel system completely when installing a new fuel tank and ensure a secure installation and check for fuel leaks after replacing the tank. Wear gloves when performing equipment repairs for hand protection.

This starter rope is a genuine Midwest Engine part, sold individually. This starter rope can be used as a replacement part for the engines of outdoor appliances such as snowblowers, lawn mowers, leaf blowers, tillers, generators, and wood chippers. This part is used to activate the pulley and turns on the engine.A starter rope might have to be replaced if it suffers visible damage that impedes its ability to start the engine properly. This damage could come in the form of tears, rips, punctures, and erosion to the material that can be caused by simple wear and tear over long-term usage or by a direct impact that warps the component beyond repair. If this is the case, the starter rope should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This starter rope is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Cub Cadet, and MTD, and MasterCut.

This is a general use replacement screw. It is a standard piece of hardware for securing various components on lawn and garden equipment that will have multiple locations and uses based on the equipment model. Owners should refer to diagrams for proper location and application of this part. As a securing tool, this screw can become worn over time. The threads can strip or the screw can become lost during other repairs. This is when a replacement may be needed. Because this is a general-use part, it might be a good idea to keep a few extras on hand. This genuine replacement screw is designed for use with Briggs & Stratton, Toro, and Murray lawn and garden machines, including over 150 models of generators, tractors, snowblowers, and pressure washers. The screw can be replaced with a wrench in all applications and should only take a few minutes to fix. This durable screw is made of sturdy metal and sold as a single unit. Those who need additional screws will have to order multiple quantities.

A crankcase gasket is a standard component for many pieces of lawn and garden equipment. It acts as a barrier to prevent the crank from being exposed to the elements. It also protects the crank from oil and other debris. The crankcase gasket is between the engine block and crankcase cover and is made of waterproof materials that fit the engine block. Holes are located on the part to insert a set of crankcase bolts.If lawn equipment is suffering an oil leak or using copious amounts of oil, this could be a sign that the crankcase gasket should be replaced. The old gasket can be peeled off by hand and then the new replacement component can be placed on the engine block. Put the crankcase cover back on, tighten the bolts, and check that the gasket is sealed. Then the oil can be added to the engine again.This crankcase gasket is a genuine OEM component directly sourced through the manufacturer. It is made of metal and comes as an individual part. The gasket is ideal for use with lawnmowers, wood chippers, snowblowers, and lawn tractors made by Craftsman, Wheel Horse, Lawn-Boy, Cub Cadet, Briggs & Stratton, Toro, and Simplicity.

The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.

This replacement part is an oil seal and is intended for use in different types of lawn equipment. This part is a genuine replacement part made by Midwest Engine. Oil seals are typically found in machines with small engines and help ensure that the oil stays within the designated area. The seal is responsible for making sure there are no leaks during or after use. A new oil seal might be needed if the current one is missing or damaged. This can include being cracked or chipped. Any damage may cause oil to leak which can lead to additional problems within the machine itself. Be sure to wear work gloves during this repair as oil is difficult to remove from hands. Refer to the appropriate owner's manual before replacing this part. This oil seal is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This genuine replacement retainer E-clip is intended for use with lawn mowers, snowblowers, pressure washers, and more. It gets its name from the shape of the letter “E”, and has one side open, allowing it to have a larger retaining area and higher thrust capacity. Depending on the piece of equipment they are installed in, these retaining clips hold bearings, gears, pulleys, and other moving parts which have grooves in them. They are made of heat-treated steel which allows it hold strong through many uses, but it may eventually begin to wear out or break with extended use.This retainer ring E-clip is compatible with several equipment brands which use Briggs and Stratton engines This is a genuine OEM replacement part and is sold individually.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Midwest Engine. A nut is a small, metal fastener that is usually connected to a threaded hole. Nuts are typically used along with a mating bolt so that it is able to fasten multiple parts together. A new nut might be needed if the user notices that the current ones are missing or damaged in any way. Though it is small, the nut is an important part of many types of machinery and can cause different parts to stop working or to not work as efficiently if the nuts are not in proper working condition. Be sure the machine is completely powered off before attempting to replace any parts. This small nut is sold individually, and it is intended for use in appliances made by Midwest Engine. This nut is an OEM replacement part.

This is a genuine replacement ring gear screw for Briggs & Stratton lawn tractors. It attaches the ring gear to the starter assembly which allows the flywheel to move and turn the engine. The ring gear screw is constructed of heavy-duty steel. It rarely falters on its own. However, the ring gear itself can wear down or malfunction.Replacing the ring gear screw is a delicate process, simply because of what must be disassembled to access it. Depending on the engine model, the entire starter assembly may need to be disassembled to access the ring gear screw. This is a genuine OEM replacement part which is sold individually and is compatible with many Briggs & Stratton engine models on Cub Cadet, Toro, and other brands of lawn mowers.

This part is a replacement camshaft. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. It is intended to replace a defective or broken camshaft in various models of outdoor power equipment.The camshaft is important as it closes and opens the equipment's exhaust and intake valves. This part is a critical engine component and thus should be replaced if faulty in any way. Make sure to drain the fuel tank and disconnect the spark plugs before attempting to install this part. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this camshaft, the appropriate owner's manual and equipment diagrams should be referred to. This camshaft is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with outdoor power equipment models that have been manufactured by Midwest Engine, MTD, Craftsman, and other brands.

This fuel pump kit is an authentic OEM replacement part sourced directly from the manufacturer for use in lawn and garden equipment. This fuel pump kit contains all the gaskets needed to repair a fuel pump or maintain it so that it doesn't have to be replaced. If the seals or gaskets have aged and deteriorated, leaking or friction could result and lead to engine damage. Replacing the gaskets with those in this fuel pump kit is much less expensive than replacing the entire fuel pump or carburetor.Work gloves, a screwdriver, and a pair of pliers are needed to install this fuel pump kit. The fuel pump and carburetor should be periodically inspected to determine if the gaskets and seals need to be replaced to keep the engine running smoothly. Regularly replacing these gaskets and seals prevents the carburetor from becoming clogged with contaminants and other debris that can prevent it from working correctly.This fuel pump kit is made of high-quality materials and is sold individually. This fuel pump kit is designed to be used on small engines manufactured by Briggs and Stratton.

This is a crankcase gasket that is used in lawn and garden equipment. It is responsible for creating an airtight seal between the cylinder assembly and the crankcase. The part is made of durable composite material, but over time it can deteriorate or break. If this happens, the other components will no longer have the appropriate seal and the tool will not work correctly. Replacing the crankcase gasket requires putting the equipment on a stable surface and disconnecting the spark plug wire. The equipment will need to be disassembled before turning the focus to the engine. Disassemble the motor to gain access to the crankcase gasket and any other damaged component inside. The replacement process will require the use of a pair of pliers, a wrench set, and a socket set. Remove the old crankcase gasket and place the new one in the same location. Reassemble all the parts to use the tool in the future.This crankcase gasket is sold as an individual part. It is an authentic OEM replacement part sourced directly from the manufacturer. This part is compatible with lawn mowers, snowblowers, and wood chippers manufactured by Simplicity, Cub Cadet, and Briggs & Stratton.

This replacement part is a rewind starter. This is a genuine replacement part made by Midwest Engine. A rewind starter, sometimes called a recoil starter, allows the operator to start the engine of certain types of lawn mowers. The user is able to start the engine by hand by cranking the system. A new rewind starter might be needed if the user is unable to start the engine as they typically would. Be sure the engine is completely turned off before replacing this part. It is recommended that the user wear work gloves when repairing or replacing parts close to the engine of any machine. This rewind starter is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.