Briggs & Stratton Engine Parts

The oil filter strains the oil as it runs through the machine, helping to remove debris and buildup to ensure that only the purest oil gets into the engine. Over time, oil gets dirty, and therefore so will the filter. This could lead to clogs and will eventually require replacement. Typically, oil filters are replaced as a part of routine oil changes, but there are some instances where an emergency replacement may be required. Replacing a clogged oil filter could improve the performance of the equipment and help reduce your emissions. To replace the oil filter, drain all of the oil from the engine and use an oil filter wrench to remove the old filter and screw the new one in place. Once the filter is secured, refill the oil and get back to using the equipment at the optimal operating performance. This Briggs & Stratton oil filter offers compatibility with a number of its lawn equipment engines. All genuine parts from this brand are designed to provide optimal performance and adhere to emissions guidelines. Be sure to check your user manual for fit and model compatibility.

This genuine OEM part is a rocker switch for lawnmower engines. A rocker switch is the component that allows the user to power the engine. If the rocker switch is no longer functioning and not turning the engine on and off as intended, it might need to be replaced. While replacing a rocker switch may seem like a difficult task, it is actually a simple fix.To replace the rocker switch, pry it off using a flathead screwdriver. Once removed from the mower, unplug the wire harness attached to it. Once unplugged, replace with the new switch. Snap the switch back into its original position and test if it has been installed correctly. If the mower turns on and the engine is able to start, then the installation was a success.This replacement part is sold individually and is compatible with Briggs and Stratton lawnmowers.

This part is a replacement screw. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. If the current screw is defective or lost, this part can be used as a replacement. It is intended for use with outdoor power equipment.Screws are an essential piece of standard hardware that secures together different components. If the current screws are lost, corroded, stripped, or ineffective, they will need to be replaced with a genuine OEM part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is suitable for use on outdoor power equipment manufactured by Midwest Engine, Briggs and Stratton, other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a fuel solenoid that is used in lawn and garden equipment engines. The solenoid is part of the carburetor assembly. It ensures proper control of the flow of the fuel to the carburetor when the engine is shut off. If there are issues with the fuel solenoid, there could be issues with the tractor's cold start performance.The fuel solenoid is made from metal and has a plastic tip. It comes with a sealing washer. Over time, the part could start to wear down. The plastic could break, or there could be corrosion. This piece can be replaced relatively easily. Complete this replacement in a well-ventilated area and wear gloves for protection.This fuel solenoid can work with certain models of lawn tractors from MTD, Toro, Troy-Bilt, Cub Cadet, and Briggs & Stratton. This piece is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

This air filter cartridge is a genuine Midwest Engine part, sold individually. This air filter cartridge can be used as a replacement part in a lawn mower. The purpose of the air filter cartridge in a lawn mower is to prevent the accumulation and buildup of external materials such as dirt, debris, and pebbles within the internal machinery of the appliance.The air filter cartridge might have to be replaced one or more times during the standard operation of the appliance if it can no longer serve its function as a means of preventing the accumulation of external materials. This could occur if the air filter cartridge has been punctured, pierced, dented, warped, or eroded. If this occurs, the air filter cartridge should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This air filter cartridge is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Lawn Boy, and Murray.

This air filter is a genuine Midwest Engine part, sold individually. This air filter can be used as a replacement part for a variety of small engine outdoor appliances such as lawn mowers, lawn tractors, wood chippers, snowblowers, and more. The purpose of an air filter is to prevent the accumulation of debris within the internal wirings and infrastructure of the appliance; additionally, the air filter prevents the leakage of internal materials from escaping the appliance.If the air filter is punctured, torn, ripped, or eroded, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter is compatible with the following outdoor appliance brands: Midwest Engine and Briggs & Stratton.

This is a genuine replacement for the air cleaner cover on select Briggs & Stratton engines. The air cleaner cover works with the air cleaner base assembly to provide a housing for the air filter. Over time, the cover and assembly can become cracked or damaged. This can affect the security of the air filter and also allow more debris to get into the engine. A cracked air cleaner cover could also lead to increased engine vibrations that could affect the filter and base. It is essential to replace this cover immediately in the event that it becomes damaged or broken. This air cleaner cover is a genuine OEM replacement that is manufactured to exact standards. It is designed to work with engines from Briggs & Stratton that are found on various pressure washers, including select models from the Vanguard brand. The cover is sold as an individual unit. Allow the engine to cool completely before beginning any repairs and protect the hands by wearing gloves.

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

This replacement part is a switch key. This is a genuine replacement part made by Midwest Engine. This part is commonly found installed within certain lawn mowers and is able to ensure that the user can turn the machine on and off according to the desired settings. A new switch key might be needed if the current one is unable to turn the machine on or off. This can be caused by normal wear and tear over time. If the key is no longer working, it can be due to this part being damaged. This should be a fairly simple repair and should only use common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement fuel line for use with Briggs & Stratton engines. This part is responsible for carrying the fuel from the tank to the fuel pump. The fuel line is attached to both the tank and carburetor using special clamps which hold it tight while making a water-tight seal. The clamps are included.The fuel pump is made of high-grade rubber, however, if left out in the weather, it will begin to break down, causing fuel to leak. Exposure to the elements is the most common cause of damage to this part.Replacing the fuel line is simple. Before replacing, ensure the fuel has been removed from the tank, or prepare a container to receive the fuel one the old line is removed from the tank. Using a clamp tool, release the clamp holding the fuel line and slide it from the fuel tank, and then do the same thing on the other end. When installing the new line, slide the clamps onto the line before placing on the mower. Then, using the clamp tool, slide the clamps into place. This fuel line is a genuine OEM replacement part. It is compatible with many Briggs & Stratton models and is sold individually.

This replacement part is a push rod. This is a genuine replacement part made by Midwest Engine. This part is commonly found in various lawn mowers and is used to help the user maneuver the machine during use. A new push rod might be needed if the current one has become damaged or is malfunctioning in any way. It is possible that the rod can become dented, bent, cracked, or chipped. If this is the case, it is best to replace the part as soon as possible. Be sure the engine is completely turned off before attempting to replace this part. Work gloves are also recommended during any repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a blower housing. This is a genuine replacement part made by Midwest Engine. This part is responsible for the blowing mechanisms used in different types of leaf blowers or snow blowers. A new blower assembly might be needed if the current blowing mechanisms are not working as properly as in previous uses. If the air is not being expelled from the machine, it is most likely due to a faulty blowing assembly. If this is the case, it should be replaced as soon as possible. Refer to the user manual for more instructions on how to replace this part properly and safely. This blower assembly is a genuine OEM replacement part to ensure proper fit. This part is also sold individually and is sourced directly from the manufacturer.

This genuine Midwest Engine cylinder head can be used as a replacement part for outdoor appliances with small engines, such as lawn mowers, leaf blowers, vacuums, tillers, and snowblowers. The function of the cylinder head is to regulate the flow of air and fuel in and out of the cylinders; it is held in place by the cylinder head gasket and it seals the cylinder block.Damage to the cylinder head can occur naturally over time. Signs that a cylinder head needs to be replaced can include lower engine power than usual, lower fuel economy, otherwise unexplained oil leakages, engine misfires, and white smoke rising from the engine. In the case of these symptoms, it is likely that the cylinder head is cracked. If that is the case upon visual inspection, the cylinder head should be removed and replaced immediately before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This cylinder head is compatible with the following brands: Briggs and Stratton, Toro, Cub Cadet, and Simplicity. Part sold individually.