Briggs & Stratton Engine Parts

The washer seal is an essential part of the carburetor float bowl on engines with carburetors on lawn mowers. This washer prevents gasoline leaks from the carburetor by sealing the bolt to the bowl.The washer seal is normally replaced when overhauling the carburetor. Reusing the old one is not recommended. If the seal between the bolt and the bowl is not tight, gasoline could leak and cause damage to the engine or cause bodily injury due to combustion. There are normally two bolts on the carburetor bowl. Each bolt will have a washer seal. It is a good idea to replace both seals at the same time to ensure both are flush with the bowl.When replacing the washer seal, it has to be flush and tight but not overtightened. If it is overtightened, it can crack and strip, making it leak and useless. If necessary, the washer can be trimmed to make a tighter fit. After making sure the fit is flush, it slides over the bolts that make the connection from the bolt to the bowl. The bolts are then tightened.This OEM Midwest Engine washer seal is sold individually for Briggs and Stratton lawn mower and lawn tractor engines.

This air cleaner gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as wood-chippers, snowblowers, leaf blowers, and lawn mowers. The function of an air cleaner gasket is to seal off and protect the engine from the accumulation of dirt, debris, and gunk in the infrastructure.The air cleaner gasket could be subject to damage from overuse or general wear and tear. If the air cleaner gasket is not sealing, thereby preventing the primer bulb from operating as usual and failing to protect the engine from outside dirt and debris, the part should be replaced immediately. The appliance at hand should not be used until the air cleaner gasket has been replaced. Before purchasing a replacement air cleaner gasket, determine whether or not the problem in question is attributable directly to the air cleaner gasket or if the engine is malfunctioning for another reason.This air cleaner gasket is compatible with the following brands: Briggs and Stratton, Simplicity, and Cub Cadet. This part sold individually.

The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.

This air filter is a genuine Midwest Engine part, sold individually. This air filter can be used as a replacement part in a lawnmower. The purpose of the air filter in a lawnmower is to protect the appliance from the gradual accumulation of debris.The air filter in a lawnmower might need to be replaced at some point within the typical lifespan of the appliance if the filter can no longer protect the appliance from accumulating external materials. This could occur if the air filter is punctured, ripped, torn, or eroded to the point that any materials can pass through it and into the machinery, rendering the part without function and necessitating a complete replacement with this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This air filter is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Cub Cadet, and Simplicity.

This carburetor overhaul kit is a genuine Midwest Engine part, sold individually. This carburetor overhaul kit can be used as a replacement part for a vertical engine. The carburetor overhaul kit comes with the carburetor, air filters, spark plugs, tune-up kits, and other repair parts required to perform repair, maintenance, or installation on a carburetor for a vertical engine. The purpose of the carburetor for a vertical engine is to mix fuel and air flowing into the appliance in the proper ratio required to ignite the spark plugs and power on the engine. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This carburetor overhaul kit is compatible with the following outdoor appliance brands: Midwest Engine and Briggs & Stratton.

A carburetor on a lawn or garden appliance often has a float-feed chamber or bowl mounted on one side. This is a miniature fuel tank that takes a trickle feed from the main fuel supply. A carburetor is unable to use fuel that is under pressure, so the float chamber keeps everything at atmospheric pressure. When any sort of dirt or debris enters the fuel and air passages, it can cause an array of issues. The debris may enter due to shrinkage of O-rings and gaskets, and that is why a replacement gasket is essential. A carburetor screwdriver is essential when making this repair. Replacing it involves removing several pieces of the carburetor assembly, including a float assembly, inlet needle valve, and the old fuel bowl gasket itself. This authentic replacement carburetor bowl gasket will fit a small engine carburetor bowl on wood chippers, leaf blowers, pressure washers, tillers, snowblowers, lawnmowers, and small engines. It is compatible with Briggs & Stratton, Toro, Simplicity, Lawn-Boy, Cub Cadet, and Snapper, among others.

This cylinder head gasket is a genuine replacement part for select small engines. The cylinder head gasket is installed between the cylinder head and the engine block. It is responsible for creating a seal for the internal combustion engine to work properly and to help keep the oil and coolant separate as they travel between the cylinder head and the engine block. Gaskets are considered a maintenance part because their exposure to high heat and pressure cause wear, warping, and other damage over time. When a gasket is damaged, the seal is affected. Air could escape or the oil and coolant could mix, which would both produce bad results for the engine. This genuine OEM cylinder head gasket replacement is manufactured to exact standards by Briggs & Stratton. This part is compatible with select engines found in lawn and garden machines manufactured by Briggs & Stratton and Toro. The gasket is sold as an individual part and does not include any hardware or additional components. Be sure to allow the engine to cool and wear gloves when replacing gaskets. It is a good idea to replace gaskets when performing other engine repairs to ensure a proper seal when putting the engine back together.

The primer bulb primes the engine on select models that feature a pulsa prime carburetor. This primer helps prevent no-starts or slow starts and can ensure that the engine fires up properly each time that you use your lawn tools. Based on its location and small size, this bulb can become damaged or break down over time. If the primer isn’t working or has cracked or fallen off, this replacement part can provide the exact fit for compatible engines. This product includes the rubber primer bulb and the plastic collar that attaches the bulb to the engine housing. The repair for this issue should only take a few minutes to remove the old primer and collar and replace it with the new one. This OEM replacement primer bulb is a genuine Briggs & Stratton replacement part and is compatible with select engines from the brand. It can also be used with select Toro machines.

This is a high-quality carburetor repair kit made for use with several types of lawn and garden equipment. It has several different components needed repair the carburetor in a small engine. The carburetor is used to ensure air and fuel mix together in the correct amounts before being ignited in the cylinder so the engine runs properly.If the engine is refusing to run even when the fuel tank is full of gasoline, the carburetor may be malfunctioning. It can be tested directly to determine whether a repair or replacement is needed. Take the air filter out and add a small amount of fuel to the carburetor. Use the starter rope to see whether the engine turns on. If it does but then dies, this indicates the carburetor should be repaired or replaced.This is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold individually. The carburetor repair kit is designed for use with lawnmowers, leaf blowers, and tillers made by Briggs & Stratton, Cub Cadet, Toro, Simplicity, and Murray. Work gloves and basic tools are needed to use this component.

This fuel filter is a genuine Midwest Engine part, sold individually. A fuel filter can be used as a replacement part for outdoor appliances including lawn mowers, snowblowers, generators, and wood chippers. This genuine OEM part is made out of durable, high quality materials.If the engine won't start, it is possible that the fuel filter has been clogged and is not allowing the flow of fuel into the carburetor, where it is mixed with air in order to ignite the spark plugs and power on the engine.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel filter is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Tecumseh, Snapper, MTD, and Simplicity.

This is a genuine float needle valve that is designed to be used in select small engines found in lawn tractors. The float needle is located in the carburetor and is responsible for assisting with the intake and outflow of gas through the assembly. As the fuel bowl in the carburetor fills and drains, this needle regulates how much fuel is present to ensure the proper operation of the engine. Over time, the valve can become cracked or get damaged because of repetitive motion and exposure to high heat. This could impact the flow of fuel and the engine performance, or cause the engine to fail completely. This genuine OEM float needle valve is manufactured to exact standards as an identical replacement for select Briggs & Stratton small engines found in lawn tractors. It can also be used with certain models from Toro and Vanguard. It is sold as an individual unit and made of durable plastic. Be sure to drain the fuel from the engine and allow it to cool before doing any repairs. Gloves are also recommended for safety. For those who need additional components, this valve may also be available as part of a compatible carburetor rebuild kit.

This is a carburetor overhaul kit. This kit contains all of the needed components to rebuild the carburetor for lawn and garden equipment engines. A carburetor mixes fuel and air before delivering it to the engine. The diaphragm helps regulate the amount of fuel that is in this mixture. The gaskets create a seal that keeps unnecessary air out so that the engine works properly.A carburetor overhaul kit is needed to fix problems including worn-out gaskets or diaphragms, gas or air leaks, and sluggish performance. Signs that there are carburetor issues include engine roughness when it's at idle, engine vibrations, misfires, or it hesitates under acceleration. Signs that the carburetor diaphragm has gone bad include the engine not starting, cutting off while running, producing excessive smoke, or revving on its own. All of these signs indicate that a carburetor overhaul kit is needed.This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This kit is compatible with lawn tractors manufactured by Midwest Engine and Briggs & Stratton.

The fuel cut-off valve is used as an external mechanism to stop the flow of gasoline from the fuel assembly to the engine to conserve fuel and maintain safe operation. If your device did not come with a cut-off valve, this is an easy install to give more control over the engine’s operation. When installing a fuel cut-off valve in your small gasoline engine, the first thing to note is the little arrow on the side of the valve. This indicates the direction that fuel will be flowing from the tank to the motor. Empty the fuel tank before proceeding with the repair. Remove the fuel line from the tank and cut the hose in two. Install properly sized hose clamps on either side of the cut and force the two ends of the valve into the severed line. Reattach the fuel lines and fill the tank. This fuel cut-off valve is compatible with a variety of gasoline-driven tools, including lawnmowers, generators, snowblowers, and chippers. Brands that use this OEM replacement part include Craftsman, Briggs & Stratton, Snapper, Simplicity, Toro, and Cub Cadet. This OEM part is sold individually.